Electronics Worksheet: Final Test
Remember (Find the topic, use the idea): Find the topic: circuit, safety, formula, component, program, sensor or IoT. Use that lesson’s rule — complete loop, V = I × R, P = V × I, last command wins, true → if part. Safety answers are always: low voltage, dry hands, an adult, never the mains.
NameDateTime takenScore ___ / 40
- 1.🔋 Cells joined + to − in a row (series) give … (a) a smaller voltage (b) the same voltage (c) a bigger voltage (d) no voltage
- 2.🔍 Which is the odd one out? (a) a paper strip (b) a rubber eraser (c) a safety pin (d) a plastic ruler
- 3.True or false: “own switch for each bulb” is true of a series circuit. (a) True (b) False
- 4.⚡ A device works on 1.5 V and takes 0.25 A. What is its power (in watts)? =
- 5.✏️ In a circuit diagram, which part is drawn as two or more cell symbols? (a) battery (b) bulb (c) resistor (d) cell
- 6.🔘 Which kind of switch springs back when let go? (a) a reed switch (b) a toggle switch (c) a slide switch (d) a push button
- 7.Which of these is an output? (a) a speaker (b) a sound sensor (c) a light sensor (d) a motion sensor
- 8.🔗 Series or parallel circuit: “bulbs share the voltage”? (a) series (b) parallel
- 9.⚙️ Which actuator would you use to turn to an exact angle? (a) an LED (b) a buzzer (c) a motor (d) a servo motor
-
10.🤖 if (light < 500) { lamp ON } else { lamp OFF }
The light sensor reads 409. What happens? (a) lamp ON (b) lamp OFF - 11.🔦 A tester circuit has a new cell, a good bulb and wires with a gap between two clips. We put a paper strip across the gap. Does the bulb glow? (a) Yes (b) No
- 12.⚠️ Is it safe to build with an adult near? (a) not safe (b) safe
- 13.🔁 Is the circuit closed or open if the switch is OFF? (a) closed (b) open
- 14.✏️ In a circuit diagram, which part is drawn as triangle, bar and arrows? (a) junction (b) motor (c) LED (d) voltmeter
- 15.💡 Why is house wiring done in parallel? (a) to save copper only (b) to make bulbs dim (c) so all go off together (d) each gets full voltage
- 16.True or false: the voltmeter measures current. (a) True (b) False
- 17.Which of these is measured in amperes (A)? (a) resistance (b) the flow of charge (c) energy used each second (d) the push of a cell
- 18.📶 Digital or analog: how bright a room is? (a) digital (b) analog
- 19.🔺 A current of 1.5 A flows through a 15 Ω resistor. What is the voltage across it (in volts)? =
- 20.📏 How many amperes (A) is 2250 mA? =
- 21.💡 An LED is joined to a 6 V battery with no resistor; its long leg goes to the + side and its short leg to the − side. What happens? (a) may burn out (b) lights up (c) does not light
- 22.🌈 In the resistor colour code, which number does black stand for?
- 23.🔍 Which is the odd one out? (a) a buzzer (b) a motion sensor (c) a temperature sensor (d) a turning knob
- 24.🔺 A current of 0.1 A flows through a 2 Ω resistor. What is the voltage across it (in volts)? =
- 25.⚡ A 6 W device works on 3 V. What current does it take (in amperes)? =
- 26.Which job is done by the pins? (a) brings power and code (b) shows the board is on (c) connect sensors and LEDs (d) restarts the program
- 27.🔢 To get a sensor reading onto a phone, which is the FIRST step? (a) the app shows it (b) the cloud stores it (c) the sensor measures (d) it is sent by Wi-Fi
- 28.⚡ What does a table fan mainly change electricity into? (a) light (b) heat (c) sound (d) movement
- 29.🗺️ In “input → process → output”, which part is the decision the program makes? (a) the input (b) the process (c) the battery (d) the output
- 30.💡 2 identical bulbs are joined in series with a 5 V battery (ideal wires). How many volts does each bulb get? =
- 31.💡 2 identical bulbs are joined in series with a 3 V battery (ideal wires). How many volts does each bulb get? =
- 32.🔺 A current of 50 mA flows through a 100 Ω resistor. What is the voltage across it (in volts)? =
- 33.Which of these is true of a parallel circuit? (a) a break stops every bulb (b) own switch for each bulb (c) bulbs share the voltage (d) a single current path
- 34.📏 How many ohms (Ω) is 10 kΩ?
- 35.🌈 A gold fourth band on a resistor means the value may be off by … (a) 50 % (b) 25 % (c) 5 % (d) 0 %
- 36.🔦 A circuit has a new cell, a good bulb and a switch that is OFF. All the wires are firmly joined. Does the bulb glow? (a) No (b) Yes
- 37.🤖 What is a microcontroller? (a) a type of battery (b) a computer on one chip (c) a kind of bulb (d) a big desktop computer
- 38.💡 6 identical bulbs are in parallel and each bulb has its own switch on its path. 1 of the switches is OFF and the rest are ON. How many bulbs glow?
- 39.💡 6 identical bulbs are in parallel and each one takes 1 A. What total current (in amperes) comes from the battery? =
- 40.🔘 Which kind of switch stays where you flip it? (a) a slide switch (b) a tilt switch (c) a push button (d) a toggle switch
Answer key
- a bigger voltage
- a safety pin
- False
- 0.375
- battery
- a push button
- a speaker
- series
- a servo motor
- lamp ON
- No
- safe
- open
- LED
- each gets full voltage
- False
- the flow of charge
- analog
- 22.5
- 2.25
- may burn out
- 0
- a buzzer
- 0.2
- 2
- connect sensors and LEDs
- the sensor measures
- movement
- the process
- 2.5
- 1.5
- 5
- own switch for each bulb
- 10000
- 5 %
- No
- a computer on one chip
- 5
- 6
- a toggle switch
Free electronics lessons, practice and worksheets at talentjr.in/electronics-for-kids