Electronics Worksheet: Switches in a Circuit
Remember (All for series, any for parallel): Series switches (one path): the bulb glows only if ALL are ON. Parallel switches (side-by-side paths): the bulb glows if ANY one is ON. Mixed: work out each path, then ask if there is at least one complete path.
NameDateTime takenScore ___ / 40
- 1.🔘 A cell, a bulb and switches A, B and C are joined one after another in a single loop (series). A is OFF, B is ON and C is OFF. Does the bulb glow? (a) Yes (b) No
- 2.What does a reed switch do? (a) stays where you flip it (b) flips up or down (c) closes near a magnet (d) slides side to side
- 3.🔘 Switch A is on the main wire next to the cell and the bulb; then the wire splits into two side-by-side paths, one with switch B and one with switch C. A is OFF, B is OFF and C is ON. Does the bulb glow? (a) No (b) Yes
- 4.True or false: a push button stays where you flip it. (a) False (b) True
- 5.What does a toggle switch do? (a) slides side to side (b) works only while pressed (c) flips up or down (d) springs back when let go
- 6.🔘 A cell and a bulb are joined to 4 side-by-side paths with one switch on each path — A, B, C and D (parallel). A is ON, B is OFF, C is OFF and D is OFF. Does the bulb glow? (a) No (b) Yes
- 7.🔘 Which kind of switch works only while pressed? (a) a push button (b) a slide switch (c) a reed switch (d) a tilt switch
- 8.🔘 A cell and a bulb are joined to 3 side-by-side paths with one switch on each path — A, B and C (parallel). A is OFF, B is OFF and C is ON. Does the bulb glow? (a) Yes (b) No
- 9.🔘 Which kind of switch springs back when let go? (a) a reed switch (b) a push button (c) a toggle switch (d) a tilt switch
- 10.🔘 A cell and a bulb are joined to 4 side-by-side paths with one switch on each path — A, B, C and D (parallel). A is ON, B is OFF, C is ON and D is ON. Does the bulb glow? (a) Yes (b) No
- 11.🔘 What does a switch do in a circuit? (a) stores current (b) makes electricity (c) changes the voltage (d) opens or closes the loop
- 12.🔘 A cell and a bulb are joined to 4 side-by-side paths with one switch on each path — A, B, C and D (parallel). A is ON, B is ON, C is OFF and D is ON. Does the bulb glow? (a) No (b) Yes
- 13.What does a slide switch do? (a) closes near a magnet (b) springs back when let go (c) slides side to side (d) works only while pressed
- 14.What does a tilt switch do? (a) slides side to side (b) closes when tipped over (c) works only while pressed (d) springs back when let go
- 15.True or false: a reed switch works only while pressed. (a) True (b) False
- 16.🔘 When a switch is ON, the circuit is … (a) closed (b) cut (c) broken (d) open
- 17.What does a toggle switch do? (a) closes near a magnet (b) stays where you flip it (c) works only while pressed (d) springs back when let go
- 18.🔘 Which kind of switch stays where you flip it? (a) a slide switch (b) a tilt switch (c) a reed switch (d) a toggle switch
- 19.🔘 A cell and a bulb are joined to 2 side-by-side paths with one switch on each path — A and B (parallel). A is OFF and B is ON. Does the bulb glow? (a) Yes (b) No
- 20.True or false: a tilt switch flips up or down. (a) False (b) True
- 21.🔘 Which kind of switch closes near a magnet? (a) a toggle switch (b) a push button (c) a tilt switch (d) a reed switch
- 22.🔘 A cell and a bulb are joined to two side-by-side paths: path 1 has switches A and B one after another, path 2 has switch C. A is OFF, B is ON and C is ON. Does the bulb glow? (a) Yes (b) No
- 23.🔘 Two switches are in series. When does the bulb glow? (a) when either is ON (b) when both are ON (c) when both are OFF (d) never
- 24.True or false: a tilt switch closes when tipped over. (a) True (b) False
- 25.🔘 Two switches are in parallel (side by side). When does the bulb glow? (a) only when both are OFF (b) when either is ON (c) never (d) only when both are ON
- 26.🔘 A cell, a bulb and switches A, B and C are joined one after another in a single loop (series). A is ON, B is OFF and C is ON. Does the bulb glow? (a) Yes (b) No
- 27.🔘 Switch A is on the main wire next to the cell and the bulb; then the wire splits into two side-by-side paths, one with switch B and one with switch C. A is OFF, B is ON and C is OFF. Does the bulb glow? (a) No (b) Yes
- 28.🔘 A cell and a bulb are joined to 3 side-by-side paths with one switch on each path — A, B and C (parallel). A is OFF, B is OFF and C is OFF. Does the bulb glow? (a) Yes (b) No
- 29.True or false: a toggle switch closes when tipped over. (a) False (b) True
- 30.🔘 A bulb and a cell are joined through 6 switches one after another in a single loop (series). What is the smallest number of switches that must be ON to light the bulb?
- 31.🔘 Which kind of switch flips up or down? (a) a slide switch (b) a toggle switch (c) a push button (d) a tilt switch
- 32.True or false: a slide switch slides side to side. (a) True (b) False
- 33.🔘 A cell and a bulb are joined to two side-by-side paths: path 1 has switches A and B one after another, path 2 has switch C. A is OFF, B is ON and C is OFF. Does the bulb glow? (a) No (b) Yes
- 34.🔘 A bulb and a cell are joined through 6 switches on 6 side-by-side paths, one switch on each path (parallel). What is the smallest number of switches that must be ON to light the bulb?
- 35.True or false: a push button works only while pressed. (a) True (b) False
- 36.🔘 A cell and a bulb are joined to 2 side-by-side paths with one switch on each path — A and B (parallel). A is ON and B is OFF. Does the bulb glow? (a) Yes (b) No
- 37.What does a push button do? (a) closes near a magnet (b) closes when tipped over (c) works only while pressed (d) stays where you flip it
- 38.True or false: a toggle switch stays where you flip it. (a) True (b) False
- 39.What does a push button do? (a) closes near a magnet (b) slides side to side (c) springs back when let go (d) closes when tipped over
- 40.🔘 A cell, a bulb and switches A and B are joined one after another in a single loop (series). A is OFF and B is ON. Does the bulb glow? (a) Yes (b) No
Answer key
- No
- closes near a magnet
- No
- False
- flips up or down
- Yes
- a push button
- Yes
- a push button
- Yes
- opens or closes the loop
- Yes
- slides side to side
- closes when tipped over
- False
- closed
- stays where you flip it
- a toggle switch
- Yes
- False
- a reed switch
- Yes
- when both are ON
- True
- when either is ON
- No
- No
- No
- False
- 6
- a toggle switch
- True
- No
- 1
- True
- Yes
- works only while pressed
- True
- springs back when let go
- No
Free electronics lessons, practice and worksheets at talentjr.in/electronics-for-kids