← Switches in a circuit lesson New set →

Electronics Worksheet: Switches in a Circuit

Electronics lesson 5: Switches in a circuit · Set 393 · 40 questions
TalentJR

Remember (All for series, any for parallel): Series switches (one path): the bulb glows only if ALL are ON. Parallel switches (side-by-side paths): the bulb glows if ANY one is ON. Mixed: work out each path, then ask if there is at least one complete path.

NameDateTime takenScore ___ / 40
  1. 1.True or false: a push button works only while pressed. (a) False (b) True
  2. 2.What does a toggle switch do? (a) closes near a magnet (b) slides side to side (c) works only while pressed (d) flips up or down
  3. 3.🔘 Which kind of switch works only while pressed? (a) a push button (b) a reed switch (c) a toggle switch (d) a slide switch
  4. 4.What does a push button do? (a) flips up or down (b) stays where you flip it (c) closes when tipped over (d) works only while pressed
  5. 5.True or false: a push button springs back when let go. (a) False (b) True
  6. 6.🔘 Two switches are in series. When does the bulb glow? (a) when both are ON (b) when both are OFF (c) never (d) when either is ON
  7. 7.🔘 Switch A is on the main wire next to the cell and the bulb; then the wire splits into two side-by-side paths, one with switch B and one with switch C. A is ON, B is ON and C is OFF. Does the bulb glow? (a) No (b) Yes
  8. 8.🔘 What does a switch do in a circuit? (a) opens or closes the loop (b) stores current (c) changes the voltage (d) makes electricity
  9. 9.🔘 Which kind of switch closes when tipped over? (a) a toggle switch (b) a reed switch (c) a push button (d) a tilt switch
  10. 10.🔘 A bulb and a cell are joined through 3 switches on 3 side-by-side paths, one switch on each path (parallel). What is the smallest number of switches that must be ON to light the bulb?
  11. 11.True or false: a tilt switch closes when tipped over. (a) False (b) True
  12. 12.🔘 A cell, a bulb and switches A, B and C are joined one after another in a single loop (series). A is OFF, B is OFF and C is OFF. Does the bulb glow? (a) No (b) Yes
  13. 13.🔘 A bulb and a cell are joined through 6 switches on 6 side-by-side paths, one switch on each path (parallel). What is the smallest number of switches that must be ON to light the bulb?
  14. 14.🔘 Which kind of switch springs back when let go? (a) a toggle switch (b) a push button (c) a slide switch (d) a tilt switch
  15. 15.What does a toggle switch do? (a) stays where you flip it (b) closes when tipped over (c) slides side to side (d) works only while pressed
  16. 16.🔘 A cell and a bulb are joined to two side-by-side paths: path 1 has switches A and B one after another, path 2 has switch C. A is ON, B is OFF and C is ON. Does the bulb glow? (a) No (b) Yes
  17. 17.🔘 Which kind of switch slides side to side? (a) a push button (b) a reed switch (c) a toggle switch (d) a slide switch
  18. 18.What does a reed switch do? (a) slides side to side (b) closes near a magnet (c) flips up or down (d) springs back when let go
  19. 19.What does a tilt switch do? (a) closes when tipped over (b) works only while pressed (c) slides side to side (d) closes near a magnet
  20. 20.🔘 Switch A is on the main wire next to the cell and the bulb; then the wire splits into two side-by-side paths, one with switch B and one with switch C. A is OFF, B is OFF and C is ON. Does the bulb glow? (a) No (b) Yes
  21. 21.🔘 A bulb and a cell are joined through 6 switches one after another in a single loop (series). What is the smallest number of switches that must be ON to light the bulb?
  22. 22.🔘 A bulb and a cell are joined through 4 switches on 4 side-by-side paths, one switch on each path (parallel). What is the smallest number of switches that must be ON to light the bulb?
  23. 23.🔘 When a switch is ON, the circuit is … (a) cut (b) open (c) closed (d) broken
  24. 24.True or false: a reed switch springs back when let go. (a) True (b) False
  25. 25.🔘 A cell, a bulb and switches A and B are joined one after another in a single loop (series). A is OFF and B is OFF. Does the bulb glow? (a) Yes (b) No
  26. 26.🔘 Two switches are in parallel (side by side). When does the bulb glow? (a) when either is ON (b) never (c) only when both are OFF (d) only when both are ON
  27. 27.🔘 Which kind of switch flips up or down? (a) a slide switch (b) a toggle switch (c) a tilt switch (d) a push button
  28. 28.🔘 A bulb and a cell are joined through 5 switches one after another in a single loop (series). What is the smallest number of switches that must be ON to light the bulb?
  29. 29.True or false: a toggle switch closes near a magnet. (a) True (b) False
  30. 30.True or false: a slide switch slides side to side. (a) False (b) True
  31. 31.True or false: a slide switch stays where you flip it. (a) False (b) True
  32. 32.🔘 A cell and a bulb are joined to 3 side-by-side paths with one switch on each path — A, B and C (parallel). A is OFF, B is OFF and C is OFF. Does the bulb glow? (a) No (b) Yes
  33. 33.🔘 A cell and a bulb are joined to two side-by-side paths: path 1 has switches A and B one after another, path 2 has switch C. A is OFF, B is OFF and C is OFF. Does the bulb glow? (a) Yes (b) No
  34. 34.🔘 Switch A is on the main wire next to the cell and the bulb; then the wire splits into two side-by-side paths, one with switch B and one with switch C. A is OFF, B is OFF and C is OFF. Does the bulb glow? (a) No (b) Yes
  35. 35.🔘 Which kind of switch stays where you flip it? (a) a push button (b) a toggle switch (c) a tilt switch (d) a slide switch
  36. 36.True or false: a reed switch works only while pressed. (a) True (b) False
  37. 37.🔘 A cell and a bulb are joined to two side-by-side paths: path 1 has switches A and B one after another, path 2 has switch C. A is ON, B is ON and C is OFF. Does the bulb glow? (a) Yes (b) No
  38. 38.True or false: a reed switch slides side to side. (a) True (b) False
  39. 39.True or false: a slide switch closes when tipped over. (a) True (b) False
  40. 40.🔘 A bulb and a cell are joined through 2 switches on 2 side-by-side paths, one switch on each path (parallel). What is the smallest number of switches that must be ON to light the bulb?

Answer key

  1. True
  2. flips up or down
  3. a push button
  4. works only while pressed
  5. True
  6. when both are ON
  7. Yes
  8. opens or closes the loop
  9. a tilt switch
  10. 1
  11. True
  12. No
  13. 1
  14. a push button
  15. stays where you flip it
  16. Yes
  17. a slide switch
  18. closes near a magnet
  19. closes when tipped over
  20. No
  21. 6
  22. 1
  23. closed
  24. False
  25. No
  26. when either is ON
  27. a toggle switch
  28. 5
  29. False
  30. True
  31. False
  32. No
  33. No
  34. No
  35. a toggle switch
  36. False
  37. Yes
  38. False
  39. False
  40. 1

Free electronics lessons, practice and worksheets at talentjr.in/electronics-for-kids