← Constraints and criteria lesson New set →

Engineering Worksheet: Constraints and Criteria

Engineering lesson 4: Constraints and criteria · Set 221 · 40 questions
TalentJR

Engineer's tip (Limits and goals): Constraint = a limit on money, materials, time or size. Criterion = a goal: what the design must do. Check both with numbers: money left ÷ price for how many you can buy; result ≥ goal for “meets it”.

NameDateTime takenScore ___ / 40
  1. 1.True or false: “keep ice for 1 hour” is a criterion (a goal). (a) True (b) False
  2. 2.📋 For a model bridge challenge, is “fit on a school desk” a constraint or a criterion? (a) a constraint (b) a criterion
  3. 3.📋 Criterion: the model bridge must hold at least 200 g. In the test it held 100 g. Does it meet the criterion? (a) Yes (b) No
  4. 4.🔍 Which is the odd one out? (a) finish in 40 minutes (b) float for 1 minute (c) lift a cup of water (d) keep ice for 1 hour
  5. 5.True or false: “hold up 500 g” is a criterion (a goal). (a) False (b) True
  6. 6.📋 A design meets every criterion but costs more than the budget. Is it acceptable? (a) yes, it works (b) no, it breaks a limit (c) only if it is red (d) yes, always
  7. 7.🔍 Which is the odd one out? (a) lift a cup of water (b) stand in a fan breeze (c) float for 1 minute (d) be under 30 cm tall
  8. 8.🔍 Which is the odd one out? (a) stand in a fan breeze (b) hold up 500 g (c) use only paper and tape (d) carry 10 coins
  9. 9.📋 Your team’s budget is ₹98. You must buy one roll of tape for ₹20. Straws cost ₹3 each. What is the greatest number of straws you can buy?
  10. 10.📋 Constraint: the tower must be no taller than 30 cm. The team’s tower is 28 cm tall. Is it within the constraint? (a) Yes (b) No
  11. 11.True or false: “float for 1 minute” is a criterion (a goal). (a) True (b) False
  12. 12.🔍 Which is the odd one out? (a) fit on a school desk (b) float for 1 minute (c) be under 30 cm tall (d) spend at most ₹100
  13. 13.📋 Constraint: the tower must be no taller than 50 cm. The team’s tower is 48 cm tall. Is it within the constraint? (a) No (b) Yes
  14. 14.True or false: “hold up 500 g” is a constraint (a limit). (a) False (b) True
  15. 15.🔍 Which is the odd one out? (a) carry 10 coins (b) stand in a fan breeze (c) spend at most ₹100 (d) keep ice for 1 hour
  16. 16.📋 Criterion: the model bridge must hold at least 900 g. In the test it held 1050 g. Does it meet the criterion? (a) No (b) Yes
  17. 17.🔍 Which is the odd one out? (a) use at most 20 straws (b) keep ice for 1 hour (c) spend at most ₹100 (d) fit on a school desk
  18. 18.📋 A constraint is … (a) a goal for success (b) a final test (c) a kind of glue (d) a limit you must keep to
  19. 19.True or false: “use only paper and tape” is a criterion (a goal). (a) True (b) False
  20. 20.📋 Your team’s budget is ₹19. You must buy one roll of tape for ₹5. Straws cost ₹1 each. What is the greatest number of straws you can buy?
  21. 21.True or false: “use at most 20 straws” is a criterion (a goal). (a) True (b) False
  22. 22.📋 Criteria are … (a) the limits on money (b) the tools you use (c) the team names (d) goals a design must meet
  23. 23.📋 Criterion: the model bridge must hold at least 1000 g. In the test it held 1100 g. Does it meet the criterion? (a) No (b) Yes
  24. 24.📋 For a model bridge challenge, is “use only paper and tape” a constraint or a criterion? (a) a criterion (b) a constraint
  25. 25.📋 Criterion: the model bridge must hold at least 400 g. In the test it held 450 g. Does it meet the criterion? (a) No (b) Yes
  26. 26.📋 Criterion: the model bridge must hold at least 500 g. In the test it held 350 g. Does it meet the criterion? (a) No (b) Yes
  27. 27.🔍 Which is the odd one out? (a) finish in 40 minutes (b) spend at most ₹100 (c) hold up 500 g (d) use only paper and tape
  28. 28.🔍 Which is the odd one out? (a) roll at least 2 metres (b) fit on a school desk (c) use at most 20 straws (d) use only paper and tape
  29. 29.True or false: “fit on a school desk” is a criterion (a goal). (a) False (b) True
  30. 30.📋 For a model bridge challenge, is “use at most 20 straws” a constraint or a criterion? (a) a constraint (b) a criterion
  31. 31.📋 Criterion: the model bridge must hold at least 300 g. In the test it held 250 g. Does it meet the criterion? (a) No (b) Yes
  32. 32.📋 Constraint: the tower must be no taller than 30 cm. The team’s tower is 30 cm tall. Is it within the constraint? (a) Yes (b) No
  33. 33.True or false: “carry 10 coins” is a constraint (a limit). (a) False (b) True
  34. 34.📋 Constraint: the tower must be no taller than 80 cm. The team’s tower is 76 cm tall. Is it within the constraint? (a) Yes (b) No
  35. 35.📋 Constraint: the tower must be no taller than 90 cm. The team’s tower is 96 cm tall. Is it within the constraint? (a) Yes (b) No
  36. 36.📋 Your team’s budget is ₹15. You must buy one roll of tape for ₹5. Straws cost ₹1 each. What is the greatest number of straws you can buy?
  37. 37.📋 Constraint: the tower must be no taller than 70 cm. The team’s tower is 76 cm tall. Is it within the constraint? (a) No (b) Yes
  38. 38.True or false: “lift a cup of water” is a criterion (a goal). (a) False (b) True
  39. 39.📋 Your team’s budget is ₹68. You must buy one roll of tape for ₹5. Straws cost ₹3 each. What is the greatest number of straws you can buy?
  40. 40.📋 Criterion: the model bridge must hold at least 400 g. In the test it held 300 g. Does it meet the criterion? (a) No (b) Yes

Answer key

  1. True
  2. a constraint
  3. No
  4. finish in 40 minutes
  5. True
  6. no, it breaks a limit
  7. be under 30 cm tall
  8. use only paper and tape
  9. 26
  10. Yes
  11. True
  12. float for 1 minute
  13. Yes
  14. False
  15. spend at most ₹100
  16. Yes
  17. keep ice for 1 hour
  18. a limit you must keep to
  19. False
  20. 14
  21. False
  22. goals a design must meet
  23. Yes
  24. a constraint
  25. Yes
  26. No
  27. hold up 500 g
  28. roll at least 2 metres
  29. False
  30. a constraint
  31. No
  32. Yes
  33. False
  34. Yes
  35. No
  36. 10
  37. No
  38. True
  39. 21
  40. No

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids