← Constraints and criteria lesson New set →

Engineering Worksheet: Constraints and Criteria

Engineering lesson 4: Constraints and criteria · Set 636 · 40 questions
TalentJR

Engineer's tip (Limits and goals): Constraint = a limit on money, materials, time or size. Criterion = a goal: what the design must do. Check both with numbers: money left ÷ price for how many you can buy; result ≥ goal for “meets it”.

NameDateTime takenScore ___ / 40
  1. 1.True or false: “stand in a fan breeze” is a constraint (a limit). (a) False (b) True
  2. 2.📋 For a model bridge challenge, is “finish in 40 minutes” a constraint or a criterion? (a) a constraint (b) a criterion
  3. 3.📋 For a model bridge challenge, is “spend at most ₹100” a constraint or a criterion? (a) a criterion (b) a constraint
  4. 4.📋 Constraint: the tower must be no taller than 40 cm. The team’s tower is 46 cm tall. Is it within the constraint? (a) Yes (b) No
  5. 5.📋 A constraint is … (a) a final test (b) a kind of glue (c) a goal for success (d) a limit you must keep to
  6. 6.📋 For a model bridge challenge, is “roll at least 2 metres” a constraint or a criterion? (a) a constraint (b) a criterion
  7. 7.True or false: “fit on a school desk” is a criterion (a goal). (a) True (b) False
  8. 8.📋 Constraint: the tower must be no taller than 90 cm. The team’s tower is 90 cm tall. Is it within the constraint? (a) Yes (b) No
  9. 9.True or false: “hold up 500 g” is a criterion (a goal). (a) False (b) True
  10. 10.True or false: “float for 1 minute” is a constraint (a limit). (a) True (b) False
  11. 11.🔍 Which is the odd one out? (a) fit on a school desk (b) use only paper and tape (c) hold up 500 g (d) spend at most ₹100
  12. 12.🔍 Which is the odd one out? (a) float for 1 minute (b) roll at least 2 metres (c) stand in a fan breeze (d) finish in 40 minutes
  13. 13.True or false: “be under 30 cm tall” is a criterion (a goal). (a) False (b) True
  14. 14.🔍 Which is the odd one out? (a) spend at most ₹100 (b) use only paper and tape (c) finish in 40 minutes (d) roll at least 2 metres
  15. 15.📋 For a model bridge challenge, is “keep ice for 1 hour” a constraint or a criterion? (a) a constraint (b) a criterion
  16. 16.🔍 Which is the odd one out? (a) use at most 20 straws (b) spend at most ₹100 (c) be under 30 cm tall (d) carry 10 coins
  17. 17.🔍 Which is the odd one out? (a) keep ice for 1 hour (b) spend at most ₹100 (c) fit on a school desk (d) finish in 40 minutes
  18. 18.🔍 Which is the odd one out? (a) use only paper and tape (b) stand in a fan breeze (c) keep ice for 1 hour (d) lift a cup of water
  19. 19.📋 Your team’s budget is ₹107. You must buy one roll of tape for ₹15. Straws cost ₹3 each. What is the greatest number of straws you can buy?
  20. 20.📋 Criterion: the model bridge must hold at least 400 g. In the test it held 300 g. Does it meet the criterion? (a) No (b) Yes
  21. 21.📋 Criteria are … (a) the tools you use (b) the team names (c) goals a design must meet (d) the limits on money
  22. 22.📋 Criterion: the model bridge must hold at least 800 g. In the test it held 900 g. Does it meet the criterion? (a) No (b) Yes
  23. 23.📋 Constraint: the tower must be no taller than 40 cm. The team’s tower is 42 cm tall. Is it within the constraint? (a) No (b) Yes
  24. 24.True or false: “be under 30 cm tall” is a constraint (a limit). (a) False (b) True
  25. 25.📋 Constraint: the tower must be no taller than 50 cm. The team’s tower is 54 cm tall. Is it within the constraint? (a) No (b) Yes
  26. 26.📋 Your team’s budget is ₹99. You must buy one roll of tape for ₹5. Straws cost ₹5 each. What is the greatest number of straws you can buy?
  27. 27.📋 Your team’s budget is ₹62. You must buy one roll of tape for ₹15. Straws cost ₹2 each. What is the greatest number of straws you can buy?
  28. 28.📋 For a model bridge challenge, is “float for 1 minute” a constraint or a criterion? (a) a criterion (b) a constraint
  29. 29.📋 Criterion: the model bridge must hold at least 600 g. In the test it held 650 g. Does it meet the criterion? (a) No (b) Yes
  30. 30.📋 For a model bridge challenge, is “stand in a fan breeze” a constraint or a criterion? (a) a criterion (b) a constraint
  31. 31.🔍 Which is the odd one out? (a) be under 30 cm tall (b) carry 10 coins (c) roll at least 2 metres (d) lift a cup of water
  32. 32.True or false: “finish in 40 minutes” is a criterion (a goal). (a) False (b) True
  33. 33.📋 Your team’s budget is ₹111. You must buy one roll of tape for ₹10. Straws cost ₹5 each. What is the greatest number of straws you can buy?
  34. 34.True or false: “spend at most ₹100” is a criterion (a goal). (a) True (b) False
  35. 35.📋 Your team’s budget is ₹49. You must buy one roll of tape for ₹5. Straws cost ₹2 each. What is the greatest number of straws you can buy?
  36. 36.📋 A design meets every criterion but costs more than the budget. Is it acceptable? (a) yes, always (b) no, it breaks a limit (c) only if it is red (d) yes, it works
  37. 37.True or false: “float for 1 minute” is a criterion (a goal). (a) True (b) False
  38. 38.True or false: “lift a cup of water” is a constraint (a limit). (a) True (b) False
  39. 39.📋 Constraint: the tower must be no taller than 70 cm. The team’s tower is 64 cm tall. Is it within the constraint? (a) Yes (b) No
  40. 40.🔍 Which is the odd one out? (a) lift a cup of water (b) use only paper and tape (c) use at most 20 straws (d) be under 30 cm tall

Answer key

  1. False
  2. a constraint
  3. a constraint
  4. No
  5. a limit you must keep to
  6. a criterion
  7. False
  8. Yes
  9. True
  10. False
  11. hold up 500 g
  12. finish in 40 minutes
  13. False
  14. roll at least 2 metres
  15. a criterion
  16. carry 10 coins
  17. keep ice for 1 hour
  18. use only paper and tape
  19. 30
  20. No
  21. goals a design must meet
  22. Yes
  23. No
  24. True
  25. No
  26. 18
  27. 23
  28. a criterion
  29. Yes
  30. a criterion
  31. be under 30 cm tall
  32. False
  33. 20
  34. False
  35. 22
  36. no, it breaks a limit
  37. True
  38. False
  39. Yes
  40. lift a cup of water

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids