← Constraints and criteria lesson New set →

Engineering Worksheet: Constraints and Criteria

Engineering lesson 4: Constraints and criteria · Set 911 · 40 questions
TalentJR

Engineer's tip (Limits and goals): Constraint = a limit on money, materials, time or size. Criterion = a goal: what the design must do. Check both with numbers: money left ÷ price for how many you can buy; result ≥ goal for “meets it”.

NameDateTime takenScore ___ / 40
  1. 1.📋 Constraint: the tower must be no taller than 90 cm. The team’s tower is 96 cm tall. Is it within the constraint? (a) No (b) Yes
  2. 2.📋 For a model bridge challenge, is “be under 30 cm tall” a constraint or a criterion? (a) a criterion (b) a constraint
  3. 3.📋 For a model bridge challenge, is “spend at most ₹100” a constraint or a criterion? (a) a constraint (b) a criterion
  4. 4.True or false: “float for 1 minute” is a criterion (a goal). (a) True (b) False
  5. 5.📋 Criterion: the model bridge must hold at least 300 g. In the test it held 400 g. Does it meet the criterion? (a) No (b) Yes
  6. 6.📋 For a model bridge challenge, is “use only paper and tape” a constraint or a criterion? (a) a constraint (b) a criterion
  7. 7.📋 Your team’s budget is ₹25. You must buy one roll of tape for ₹5. Straws cost ₹2 each. What is the greatest number of straws you can buy?
  8. 8.📋 Criterion: the model bridge must hold at least 700 g. In the test it held 550 g. Does it meet the criterion? (a) No (b) Yes
  9. 9.📋 Your team’s budget is ₹18. You must buy one roll of tape for ₹10. Straws cost ₹1 each. What is the greatest number of straws you can buy?
  10. 10.True or false: “keep ice for 1 hour” is a criterion (a goal). (a) False (b) True
  11. 11.📋 A constraint is … (a) a kind of glue (b) a goal for success (c) a limit you must keep to (d) a final test
  12. 12.True or false: “be under 30 cm tall” is a criterion (a goal). (a) False (b) True
  13. 13.📋 For a model bridge challenge, is “float for 1 minute” a constraint or a criterion? (a) a criterion (b) a constraint
  14. 14.📋 Constraint: the tower must be no taller than 100 cm. The team’s tower is 98 cm tall. Is it within the constraint? (a) Yes (b) No
  15. 15.🔍 Which is the odd one out? (a) use at most 20 straws (b) roll at least 2 metres (c) lift a cup of water (d) stand in a fan breeze
  16. 16.📋 For a model bridge challenge, is “roll at least 2 metres” a constraint or a criterion? (a) a constraint (b) a criterion
  17. 17.📋 For a model bridge challenge, is “finish in 40 minutes” a constraint or a criterion? (a) a constraint (b) a criterion
  18. 18.True or false: “use at most 20 straws” is a constraint (a limit). (a) True (b) False
  19. 19.📋 Criteria are … (a) goals a design must meet (b) the limits on money (c) the tools you use (d) the team names
  20. 20.True or false: “hold up 500 g” is a criterion (a goal). (a) True (b) False
  21. 21.📋 Criterion: the model bridge must hold at least 400 g. In the test it held 450 g. Does it meet the criterion? (a) No (b) Yes
  22. 22.📋 A design meets every criterion but costs more than the budget. Is it acceptable? (a) only if it is red (b) yes, always (c) no, it breaks a limit (d) yes, it works
  23. 23.🔍 Which is the odd one out? (a) float for 1 minute (b) be under 30 cm tall (c) carry 10 coins (d) hold up 500 g
  24. 24.📋 Constraint: the tower must be no taller than 80 cm. The team’s tower is 80 cm tall. Is it within the constraint? (a) No (b) Yes
  25. 25.🔍 Which is the odd one out? (a) use at most 20 straws (b) fit on a school desk (c) roll at least 2 metres (d) spend at most ₹100
  26. 26.True or false: “stand in a fan breeze” is a criterion (a goal). (a) False (b) True
  27. 27.📋 For a model bridge challenge, is “carry 10 coins” a constraint or a criterion? (a) a constraint (b) a criterion
  28. 28.📋 Your team’s budget is ₹48. You must buy one roll of tape for ₹20. Straws cost ₹4 each. What is the greatest number of straws you can buy?
  29. 29.📋 Criterion: the model bridge must hold at least 300 g. In the test it held 200 g. Does it meet the criterion? (a) Yes (b) No
  30. 30.🔍 Which is the odd one out? (a) be under 30 cm tall (b) finish in 40 minutes (c) use only paper and tape (d) keep ice for 1 hour
  31. 31.🔍 Which is the odd one out? (a) roll at least 2 metres (b) hold up 500 g (c) use only paper and tape (d) carry 10 coins
  32. 32.True or false: “finish in 40 minutes” is a criterion (a goal). (a) False (b) True
  33. 33.📋 Your team’s budget is ₹42. You must buy one roll of tape for ₹20. Straws cost ₹1 each. What is the greatest number of straws you can buy?
  34. 34.True or false: “lift a cup of water” is a criterion (a goal). (a) True (b) False
  35. 35.🔍 Which is the odd one out? (a) stand in a fan breeze (b) fit on a school desk (c) use only paper and tape (d) spend at most ₹100
  36. 36.📋 Your team’s budget is ₹21. You must buy one roll of tape for ₹10. Straws cost ₹1 each. What is the greatest number of straws you can buy?
  37. 37.📋 Your team’s budget is ₹43. You must buy one roll of tape for ₹5. Straws cost ₹2 each. What is the greatest number of straws you can buy?
  38. 38.📋 Criterion: the model bridge must hold at least 300 g. In the test it held 150 g. Does it meet the criterion? (a) No (b) Yes
  39. 39.📋 For a model bridge challenge, is “hold up 500 g” a constraint or a criterion? (a) a criterion (b) a constraint
  40. 40.True or false: “keep ice for 1 hour” is a constraint (a limit). (a) False (b) True

Answer key

  1. No
  2. a constraint
  3. a constraint
  4. True
  5. Yes
  6. a constraint
  7. 10
  8. No
  9. 8
  10. True
  11. a limit you must keep to
  12. False
  13. a criterion
  14. Yes
  15. use at most 20 straws
  16. a criterion
  17. a constraint
  18. True
  19. goals a design must meet
  20. True
  21. Yes
  22. no, it breaks a limit
  23. be under 30 cm tall
  24. Yes
  25. roll at least 2 metres
  26. True
  27. a criterion
  28. 7
  29. No
  30. keep ice for 1 hour
  31. use only paper and tape
  32. False
  33. 22
  34. True
  35. stand in a fan breeze
  36. 11
  37. 19
  38. No
  39. a criterion
  40. False

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids