← Constraints and criteria lesson New set →

Engineering Worksheet: Constraints and Criteria

Engineering lesson 4: Constraints and criteria · Set 956 · 40 questions
TalentJR

Engineer's tip (Limits and goals): Constraint = a limit on money, materials, time or size. Criterion = a goal: what the design must do. Check both with numbers: money left ÷ price for how many you can buy; result ≥ goal for “meets it”.

NameDateTime takenScore ___ / 40
  1. 1.📋 A design meets every criterion but costs more than the budget. Is it acceptable? (a) yes, it works (b) only if it is red (c) no, it breaks a limit (d) yes, always
  2. 2.📋 For a model bridge challenge, is “use only paper and tape” a constraint or a criterion? (a) a criterion (b) a constraint
  3. 3.📋 Constraint: the tower must be no taller than 40 cm. The team’s tower is 36 cm tall. Is it within the constraint? (a) Yes (b) No
  4. 4.📋 Criterion: the model bridge must hold at least 200 g. In the test it held 300 g. Does it meet the criterion? (a) No (b) Yes
  5. 5.📋 For a model bridge challenge, is “carry 10 coins” a constraint or a criterion? (a) a constraint (b) a criterion
  6. 6.📋 Criteria are … (a) the team names (b) the limits on money (c) goals a design must meet (d) the tools you use
  7. 7.🔍 Which is the odd one out? (a) be under 30 cm tall (b) roll at least 2 metres (c) spend at most ₹100 (d) use at most 20 straws
  8. 8.True or false: “lift a cup of water” is a criterion (a goal). (a) True (b) False
  9. 9.🔍 Which is the odd one out? (a) finish in 40 minutes (b) stand in a fan breeze (c) use at most 20 straws (d) be under 30 cm tall
  10. 10.True or false: “carry 10 coins” is a criterion (a goal). (a) False (b) True
  11. 11.📋 Your team’s budget is ₹83. You must buy one roll of tape for ₹15. Straws cost ₹4 each. What is the greatest number of straws you can buy?
  12. 12.True or false: “roll at least 2 metres” is a constraint (a limit). (a) True (b) False
  13. 13.🔍 Which is the odd one out? (a) carry 10 coins (b) spend at most ₹100 (c) stand in a fan breeze (d) lift a cup of water
  14. 14.🔍 Which is the odd one out? (a) stand in a fan breeze (b) finish in 40 minutes (c) roll at least 2 metres (d) float for 1 minute
  15. 15.📋 Criterion: the model bridge must hold at least 800 g. In the test it held 850 g. Does it meet the criterion? (a) Yes (b) No
  16. 16.📋 Criterion: the model bridge must hold at least 800 g. In the test it held 750 g. Does it meet the criterion? (a) Yes (b) No
  17. 17.True or false: “float for 1 minute” is a criterion (a goal). (a) True (b) False
  18. 18.📋 Your team’s budget is ₹51. You must buy one roll of tape for ₹10. Straws cost ₹4 each. What is the greatest number of straws you can buy?
  19. 19.True or false: “fit on a school desk” is a constraint (a limit). (a) True (b) False
  20. 20.📋 Constraint: the tower must be no taller than 100 cm. The team’s tower is 96 cm tall. Is it within the constraint? (a) Yes (b) No
  21. 21.True or false: “carry 10 coins” is a constraint (a limit). (a) False (b) True
  22. 22.📋 Your team’s budget is ₹23. You must buy one roll of tape for ₹10. Straws cost ₹2 each. What is the greatest number of straws you can buy?
  23. 23.📋 For a model bridge challenge, is “stand in a fan breeze” a constraint or a criterion? (a) a criterion (b) a constraint
  24. 24.📋 Constraint: the tower must be no taller than 90 cm. The team’s tower is 92 cm tall. Is it within the constraint? (a) No (b) Yes
  25. 25.True or false: “stand in a fan breeze” is a constraint (a limit). (a) True (b) False
  26. 26.🔍 Which is the odd one out? (a) float for 1 minute (b) stand in a fan breeze (c) roll at least 2 metres (d) be under 30 cm tall
  27. 27.📋 Criterion: the model bridge must hold at least 200 g. In the test it held 150 g. Does it meet the criterion? (a) No (b) Yes
  28. 28.📋 Constraint: the tower must be no taller than 70 cm. The team’s tower is 72 cm tall. Is it within the constraint? (a) No (b) Yes
  29. 29.📋 For a model bridge challenge, is “lift a cup of water” a constraint or a criterion? (a) a constraint (b) a criterion
  30. 30.📋 Constraint: the tower must be no taller than 70 cm. The team’s tower is 66 cm tall. Is it within the constraint? (a) Yes (b) No
  31. 31.📋 Constraint: the tower must be no taller than 80 cm. The team’s tower is 86 cm tall. Is it within the constraint? (a) Yes (b) No
  32. 32.True or false: “hold up 500 g” is a constraint (a limit). (a) False (b) True
  33. 33.📋 Your team’s budget is ₹27. You must buy one roll of tape for ₹15. Straws cost ₹1 each. What is the greatest number of straws you can buy?
  34. 34.📋 For a model bridge challenge, is “finish in 40 minutes” a constraint or a criterion? (a) a constraint (b) a criterion
  35. 35.True or false: “keep ice for 1 hour” is a constraint (a limit). (a) True (b) False
  36. 36.📋 For a model bridge challenge, is “be under 30 cm tall” a constraint or a criterion? (a) a constraint (b) a criterion
  37. 37.📋 Constraint: the tower must be no taller than 40 cm. The team’s tower is 44 cm tall. Is it within the constraint? (a) Yes (b) No
  38. 38.🔍 Which is the odd one out? (a) spend at most ₹100 (b) finish in 40 minutes (c) float for 1 minute (d) be under 30 cm tall
  39. 39.📋 Constraint: the tower must be no taller than 90 cm. The team’s tower is 84 cm tall. Is it within the constraint? (a) Yes (b) No
  40. 40.📋 Constraint: the tower must be no taller than 50 cm. The team’s tower is 52 cm tall. Is it within the constraint? (a) No (b) Yes

Answer key

  1. no, it breaks a limit
  2. a constraint
  3. Yes
  4. Yes
  5. a criterion
  6. goals a design must meet
  7. roll at least 2 metres
  8. True
  9. stand in a fan breeze
  10. True
  11. 17
  12. False
  13. spend at most ₹100
  14. finish in 40 minutes
  15. Yes
  16. No
  17. True
  18. 10
  19. True
  20. Yes
  21. False
  22. 6
  23. a criterion
  24. No
  25. False
  26. be under 30 cm tall
  27. No
  28. No
  29. a criterion
  30. Yes
  31. No
  32. False
  33. 12
  34. a constraint
  35. False
  36. a constraint
  37. No
  38. float for 1 minute
  39. Yes
  40. No

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids