Engineering Worksheet: Final Test
Engineer's tip (Find the topic, use the idea): Find the topic: design process, force, machine, lever, structure, material, bridge or scale. Use that lesson’s rule — what is in the middle, load × distance = effort × distance, work = force × distance, real = drawing × scale. Write the calculation before you answer.
NameDateTime takenScore ___ / 40
- 1.True or false: a steering wheel is a pulley. (a) True (b) False
- 2.🧱 Which property matters most for a hair band? (a) transparent (b) flexible (c) electrical conductor (d) waterproof
- 3.🔍 Which is the odd one out? (a) a volcano (b) a coral reef (c) a banyan tree (d) a ceiling fan
- 4.Which of these uses an arch? (a) an electric pylon (b) a shelf on two brackets (c) a lintel over a door (d) an old stone bridge
- 5.🧑🔧 Which kind of engineer designs factory machines? (a) mechanical (b) biomedical (c) chemical (d) civil
- 6.True or false: a slab over a canal uses a beam. (a) False (b) True
- 7.🧪 Why do engineers make prototypes? (a) to sell them at once (b) to avoid testing (c) to decorate a room (d) to test ideas cheaply
- 8.🔍 Which is the odd one out? (a) a swing chain (b) a tall bridge tower (c) a stretched rubber band (d) a suspension cable
- 9.True or false: a bottle opener is a class 2 lever (load in the middle). (a) True (b) False
- 10.💪 A cart is pulled to the right with 60 N and to the left with 65 N. Which way does the net force act? (a) no net force (b) to the left (c) to the right
- 11.🤝 In a design team, who cuts and joins parts? (a) builder (b) recorder (c) team leader (d) tester
- 12.⚙️ Which simple machine is a bottle cap? (a) wheel and axle (b) pulley (c) screw (d) inclined plane
- 13.True or false: a wheelbarrow is a class 2 lever (load in the middle). (a) False (b) True
- 14.🛞 The same block is pulled at a steady speed across four surfaces. The forces needed were: ice 2 N, a glass sheet 6 N, a wooden plank 9 N, sandpaper 13 N. Which surface gave the most friction? (a) a wooden plank (b) ice (c) a glass sheet (d) sandpaper
- 15.Which of these is in compression (pushed)? (a) a brick at a wall base (b) a suspension cable (c) a crane lifting cable (d) a hanging lamp chain
- 16.🔧 Which tool would you use to check a shelf is level? (a) a spirit level (b) a tape measure (c) pliers (d) a hammer
- 17.🛞 Is friction helpful or a problem here: gripping a cricket bat? (a) a problem (b) helpful
- 18.Which of these is a wedge? (a) a well winch handle (b) a road up a hill (c) a bottle opener (d) the tip of a nail
- 19.🪝 A pulley system has 3 rope sections holding up the load. To lift the load by 9 m, how many metres of rope must you pull?
- 20.True or false: a roof sheet needs a waterproof material. (a) False (b) True
- 21.⚖️ A seesaw balances. Zoya (420 N) sits 1 m from the pivot on one side; Meena (140 N) sits ? m from the pivot on the other side. What is the missing distance in metres?
- 22.♻️ Reduce, reuse or recycle: buy less packaging? (a) reduce (b) reuse (c) recycle
- 23.🛞 More or less friction: a box pushed on carpet? (a) more friction (b) less friction
- 24.♻️ Is natural gas a renewable or a non-renewable energy source? (a) non-renewable (b) renewable
- 25.🔺 A flat frame has 9 straight sides joined by loose pins at the corners. What is the least number of corner-to-corner braces needed to make it rigid?
- 26.📐 A beam is 400 cm long. How long is it in metres? =
- 27.💪 Is drawing up a well bucket a push or a pull? (a) a pull (b) a push
- 28.Which of these is in compression (pushed)? (a) a tug of war rope (b) a suspension cable (c) a hanging lamp chain (d) a temple column
- 29.🧪 What is a prototype? (a) a broken part (b) a sales poster (c) an early test model (d) the final product
- 30.🧱 Is plastic an electrical conductor or an insulator? (a) an insulator (b) a conductor
- 31.🤝 A team of 3 shares 18 equal jobs fairly. Each job takes 2 minutes. How many minutes does each person work?
- 32.🔍 Which is the odd one out? (a) fit on a school desk (b) hold up 500 g (c) be under 30 cm tall (d) use only paper and tape
- 33.♻️ Which energy source will never run out? (a) sunlight (b) petrol (c) coal (d) diesel
- 34.💪 In which unit do we measure force? (a) second (s) (b) metre (m) (c) litre (L) (d) newton (N)
- 35.🔢 To follow the engineering design process, which comes first: “Improve” or “Create”? (a) Create (b) Improve
- 36.True or false: pulling a cart is a push. (a) False (b) True
- 37.Which of these is an arch bridge? (a) deck hangs from cables (b) cables tied down at ends (c) a rope bridge in hills (d) a curve under the deck
- 38.🌉 In a stone arch bridge, the stones are in … (a) no force (b) tension (c) compression (d) friction
- 39.True or false: sunlight is a non-renewable energy source. (a) False (b) True
- 40.⚖️ Which class of lever is a seesaw? (a) class 3 (b) class 1 (c) class 2
Answer key
- False
- flexible
- a ceiling fan
- an old stone bridge
- mechanical
- True
- to test ideas cheaply
- a tall bridge tower
- True
- to the left
- builder
- screw
- True
- sandpaper
- a brick at a wall base
- a spirit level
- helpful
- the tip of a nail
- 27
- True
- 3
- reduce
- more friction
- non-renewable
- 6
- 4
- a pull
- a temple column
- an early test model
- an insulator
- 12
- hold up 500 g
- sunlight
- newton (N)
- Create
- False
- a curve under the deck
- compression
- False
- class 1
Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids