Engineering Worksheet: Final Test
Engineer's tip (Find the topic, use the idea): Find the topic: design process, force, machine, lever, structure, material, bridge or scale. Use that lesson’s rule — what is in the middle, load × distance = effort × distance, work = force × distance, real = drawing × scale. Write the calculation before you answer.
NameDateTime takenScore ___ / 40
- 1.⚖️ A seesaw balances. Asha (260 N) sits 4 m from the pivot on one side; Zoya (? N) sits 2 m from the pivot on the other side. What is the missing weight in newtons?
- 2.🏋️ Can a simple machine reduce the work done? (a) yes, by half (b) only on Mondays (c) yes, always (d) no, work stays the same
- 3.🔢 To follow the engineering design process, which comes first: “Imagine” or “Plan”? (a) Imagine (b) Plan
- 4.True or false: a beam balance is a class 3 lever (effort in the middle). (a) True (b) False
- 5.Which of these is reduce (use less)? (a) refill a water bottle (b) pulp old paper (c) melt glass into new jars (d) carry a cloth bag
- 6.🧱 Which material is best for the core of an electric wire? (a) rubber (b) glass (c) copper (d) wood
- 7.🤝 A teammate’s idea seems odd. What should you do first? (a) listen and ask why (b) ignore it (c) laugh at it (d) walk away
- 8.📐 On a plan, 1 cm stands for 5 m. A wall is 13 cm long on the plan. How long is the real wall, in metres?
- 9.Which of these needs a waterproof material? (a) a skipping rope (b) a spectacle lens (c) the core of a wire (d) an umbrella cover
- 10.🪝 What does a single fixed pulley change? (a) the size of the load (b) the direction of pull (c) gravity (d) the colour of rope
- 11.🔺 Which strong shape does a planetarium roof use? (a) beam (b) triangle (c) dome (d) arch
- 12.True or false: to put tools back after use is not safe. (a) False (b) True
- 13.🌉 Which bridge type can cross the widest gap in one span? (a) arch bridge (b) suspension bridge (c) beam bridge (d) log bridge
- 14.True or false: “cables tied down at ends” is an arch bridge. (a) True (b) False
- 15.🏋️ A force of 190 N did 1710 J of work. How many metres did the object move?
- 16.Which of these is a wheel and axle? (a) a nut and bolt (b) a bottle cap (c) a steering wheel (d) a road up a hill
- 17.🪢 Tension or compression: a stone in an arch? (a) tension (b) compression
- 18.True or false: to build the model is the Create step. (a) True (b) False
- 19.Which of these uses a beam? (a) a roof truss (b) a bicycle frame (c) a plank over a drain (d) an electric pylon
- 20.Which of these happens in the Improve step? (a) measure its performance (b) check it against goals (c) brainstorm many ideas (d) make it better, retest
- 21.True or false: an electrical engineer builds a website. (a) False (b) True
- 22.Which of these happens in the Imagine step? (a) redesign after testing (b) think of wild ideas (c) follow the plan to build (d) list the materials
- 23.Which of these is an inclined plane? (a) an axe blade (b) a claw hammer on a nail (c) a round doorknob (d) a playground slide
- 24.Which of these uses an arch? (a) a planetarium roof (b) a bicycle frame (c) a lintel over a door (d) an old stone bridge
- 25.Which job is a tape measure for? (a) smooth a rough edge (b) make a hole in wood (c) drive in a nail (d) measure a long length
- 26.True or false: “a curve under the deck” is a suspension bridge. (a) False (b) True
- 27.Which of these is reduce (use less)? (a) refill a water bottle (b) give old books away (c) fix a dripping tap (d) use a jar as a pen stand
- 28.🛠️ Is a ceiling fan made by engineers or found in nature? (a) found in nature (b) made by engineers
- 29.🧪 Is it good or poor testing to hide a failed test? (a) poor testing (b) good testing
- 30.🤝 Is it good or poor teamwork to blame others for faults? (a) poor teamwork (b) good teamwork
- 31.🏋️ A machine lifts a load of 100 N when you push with 50 N. What is its mechanical advantage (MA)?
- 32.📋 For a model bridge challenge, is “spend at most ₹100” a constraint or a criterion? (a) a criterion (b) a constraint
- 33.Which of these makes a building less safe in earthquakes? (a) fitting rubber base pads (b) keeping a simple shape (c) adding cross bracing (d) raising heavy tanks high
- 34.🦺 In the workshop, is it safe to wear safety goggles? (a) safe (b) not safe
- 35.True or false: to check a shelf is level, use sandpaper. (a) True (b) False
- 36.📐 On a plan, 1 cm stands for 5 m. A real bridge is 20 m long. How long is it on the plan, in centimetres?
- 37.🏋️ A machine lifts a load of 120 N when you push with 60 N. What is its mechanical advantage (MA)?
- 38.📋 Your team’s budget is ₹58. You must buy one roll of tape for ₹5. Straws cost ₹5 each. What is the greatest number of straws you can buy?
- 39.📋 For a model bridge challenge, is “keep ice for 1 hour” a constraint or a criterion? (a) a constraint (b) a criterion
- 40.True or false: a tug of war is a pull. (a) False (b) True
Answer key
- 520
- no, work stays the same
- Imagine
- False
- carry a cloth bag
- copper
- listen and ask why
- 65
- an umbrella cover
- the direction of pull
- dome
- False
- suspension bridge
- False
- 9
- a steering wheel
- compression
- True
- a plank over a drain
- make it better, retest
- False
- think of wild ideas
- a playground slide
- an old stone bridge
- measure a long length
- False
- fix a dripping tap
- made by engineers
- poor testing
- poor teamwork
- 2
- a constraint
- raising heavy tanks high
- safe
- False
- 4
- 2
- 10
- a criterion
- True
Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids