Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 1 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🔍 Which is the odd one out? (a) run while holding tools (b) let adults use hot glue (c) touch a hot glue tip (d) use a cracked tool
2. 2.True or false: to cut a wooden plank, use a saw. (a) False (b) True
3. 3.True or false: to tighten a nut, use a protractor. (a) False (b) True
4. 4.True or false: to carry scissors closed is safe. (a) False (b) True
5. 5.🦺 What protects your eyes when sawing or drilling? (a) a cap (b) nothing (c) safety goggles (d) sunglasses
6. 6.🔍 Which is the odd one out? (a) touch a hot glue tip (b) play near a moving drill (c) put tools back after use (d) leave tools on the floor
7. 7.True or false: to tighten a nut, use sandpaper. (a) True (b) False
8. 8.Which job is a spanner for? (a) cut a wooden plank (b) tighten a nut (c) measure a long length (d) check a shelf is level
9. 9.🦺 How should you carry scissors? (a) while running (b) by the blades (c) points down, closed (d) points up, open
10. 10.Which job is sandpaper for? (a) turn a screw (b) measure a long length (c) make a hole in wood (d) smooth a rough edge
11. 11.🔍 Which is the odd one out? (a) clamp wood before sawing (b) cut away from your body (c) play near a moving drill (d) put tools back after use
12. 12.Which job is a saw for? (a) grip and bend wire (b) tighten a nut (c) smooth a rough edge (d) cut a wooden plank
13. 13.🔍 Which is the odd one out? (a) touch a hot glue tip (b) leave tools on the floor (c) use a cracked tool (d) tie back long hair
14. 14.True or false: to let adults use hot glue is safe. (a) False (b) True
15. 15.Which job is a screwdriver for? (a) check a shelf is level (b) turn a screw (c) grip and bend wire (d) tighten a nut
16. 16.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) an adult (b) any child alone (c) the youngest child (d) a stranger
17. 17.🔍 Which is the odd one out? (a) let adults use hot glue (b) wear safety goggles (c) touch a hot glue tip (d) clamp wood before sawing
18. 18.Which job is a tape measure for? (a) turn a screw (b) measure a long length (c) drive in a nail (d) make a hole in wood
19. 19.🔍 Which is the odd one out? (a) leave tools on the floor (b) run while holding tools (c) wear safety goggles (d) touch a hot glue tip
20. 20.Which job is a hand drill for? (a) turn a screw (b) drive in a nail (c) check a shelf is level (d) make a hole in wood
21. 21.Which job is a spirit level for? (a) drive in a nail (b) tighten a nut (c) check a shelf is level (d) grip and bend wire
22. 22.True or false: to put tools back after use is not safe. (a) False (b) True
23. 23.🦺 In the workshop, is it safe to leave tools on the floor? (a) safe (b) not safe
24. 24.True or false: to check a shelf is level, use a spirit level. (a) True (b) False
25. 25.🦺 In the workshop, is it safe to wear safety goggles? (a) not safe (b) safe
26. 26.🔧 Which tool would you use to cut a wooden plank? (a) a spirit level (b) a hand drill (c) a screwdriver (d) a saw
27. 27.True or false: to leave tools on the floor is not safe. (a) False (b) True
28. 28.True or false: to measure a long length, use a tape measure. (a) False (b) True
29. 29.True or false: to play near a moving drill is safe. (a) False (b) True
30. 30.🦺 In the workshop, is it safe to carry scissors closed? (a) not safe (b) safe
31. 31.🦺 In the workshop, is it safe to cut towards your hand? (a) not safe (b) safe
32. 32.🔍 Which is the odd one out? (a) cut away from your body (b) let adults use hot glue (c) tie back long hair (d) use a cracked tool
33. 33.🔧 Which tool would you use to check a shelf is level? (a) a spanner (b) a spirit level (c) a saw (d) a protractor
34. 34.🔍 Which is the odd one out? (a) leave tools on the floor (b) cut away from your body (c) put tools back after use (d) wear safety goggles
35. 35.True or false: to let adults use hot glue is not safe. (a) False (b) True
36. 36.True or false: to grip and bend wire, use a saw. (a) False (b) True
37. 37.True or false: to measure an angle, use sandpaper. (a) True (b) False
38. 38.True or false: to leave tools on the floor is safe. (a) True (b) False
39. 39.True or false: to use a cracked tool is safe. (a) True (b) False
40. 40.Which job is a hammer for? (a) measure an angle (b) tighten a nut (c) drive in a nail (d) cut a wooden plank

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids