← Tools and workshop safety lesson New set →

Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 100 · 40 questions
TalentJR

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

NameDateTime takenScore ___ / 40
  1. 1.True or false: to make a hole in wood, use a hand drill. (a) False (b) True
  2. 2.True or false: to cut towards your hand is safe. (a) True (b) False
  3. 3.Which job is a screwdriver for? (a) measure a long length (b) cut a wooden plank (c) check a shelf is level (d) turn a screw
  4. 4.True or false: to make a hole in wood, use a hammer. (a) False (b) True
  5. 5.🦺 What protects your eyes when sawing or drilling? (a) safety goggles (b) nothing (c) a cap (d) sunglasses
  6. 6.Which job is a spanner for? (a) tighten a nut (b) cut a wooden plank (c) drive in a nail (d) smooth a rough edge
  7. 7.True or false: to cut away from your body is not safe. (a) True (b) False
  8. 8.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) a stranger (b) the youngest child (c) an adult (d) any child alone
  9. 9.True or false: to grip and bend wire, use pliers. (a) True (b) False
  10. 10.True or false: to cut away from your body is safe. (a) False (b) True
  11. 11.True or false: to drive in a nail, use a spanner. (a) False (b) True
  12. 12.True or false: to measure a long length, use a hammer. (a) True (b) False
  13. 13.🦺 In the workshop, is it safe to wear safety goggles? (a) not safe (b) safe
  14. 14.True or false: to measure a long length, use a tape measure. (a) False (b) True
  15. 15.True or false: to put tools back after use is not safe. (a) True (b) False
  16. 16.Which job is a tape measure for? (a) check a shelf is level (b) cut a wooden plank (c) measure a long length (d) tighten a nut
  17. 17.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe
  18. 18.🔍 Which is the odd one out? (a) carry scissors closed (b) touch a hot glue tip (c) let adults use hot glue (d) put tools back after use
  19. 19.🔍 Which is the odd one out? (a) play near a moving drill (b) wear safety goggles (c) clamp wood before sawing (d) put tools back after use
  20. 20.🔍 Which is the odd one out? (a) let adults use hot glue (b) cut away from your body (c) cut towards your hand (d) put tools back after use
  21. 21.Which job is a protractor for? (a) measure an angle (b) tighten a nut (c) measure a long length (d) grip and bend wire
  22. 22.True or false: to cut a wooden plank, use a tape measure. (a) False (b) True
  23. 23.🦺 How should you carry scissors? (a) by the blades (b) points down, closed (c) while running (d) points up, open
  24. 24.🔍 Which is the odd one out? (a) run while holding tools (b) clamp wood before sawing (c) use a cracked tool (d) cut towards your hand
  25. 25.🔧 Which tool would you use to grip and bend wire? (a) a tape measure (b) a hammer (c) a spirit level (d) pliers
  26. 26.True or false: to drive in a nail, use a hammer. (a) False (b) True
  27. 27.🦺 In the workshop, is it safe to play near a moving drill? (a) not safe (b) safe
  28. 28.🔧 Which tool would you use to measure a long length? (a) a spirit level (b) a protractor (c) sandpaper (d) a tape measure
  29. 29.Which job is a hand drill for? (a) measure an angle (b) tighten a nut (c) cut a wooden plank (d) make a hole in wood
  30. 30.True or false: to let adults use hot glue is not safe. (a) True (b) False
  31. 31.🔧 Which tool would you use to cut a wooden plank? (a) a hand drill (b) a saw (c) a spirit level (d) a hammer
  32. 32.True or false: to tighten a nut, use a spanner. (a) True (b) False
  33. 33.Which job is a saw for? (a) grip and bend wire (b) cut a wooden plank (c) turn a screw (d) measure a long length
  34. 34.🦺 In the workshop, is it safe to cut towards your hand? (a) not safe (b) safe
  35. 35.🔧 Which tool would you use to measure an angle? (a) a saw (b) a tape measure (c) a protractor (d) a hammer
  36. 36.🔍 Which is the odd one out? (a) let adults use hot glue (b) carry scissors closed (c) leave tools on the floor (d) wear safety goggles
  37. 37.True or false: to carry scissors closed is not safe. (a) False (b) True
  38. 38.True or false: to leave tools on the floor is safe. (a) False (b) True
  39. 39.True or false: to check a shelf is level, use a spirit level. (a) True (b) False
  40. 40.🔍 Which is the odd one out? (a) leave tools on the floor (b) tie back long hair (c) cut towards your hand (d) use a cracked tool

Answer key

  1. True
  2. False
  3. turn a screw
  4. False
  5. safety goggles
  6. tighten a nut
  7. False
  8. an adult
  9. True
  10. True
  11. False
  12. False
  13. safe
  14. True
  15. False
  16. measure a long length
  17. safe
  18. touch a hot glue tip
  19. play near a moving drill
  20. cut towards your hand
  21. measure an angle
  22. False
  23. points down, closed
  24. clamp wood before sawing
  25. pliers
  26. True
  27. not safe
  28. a tape measure
  29. make a hole in wood
  30. False
  31. a saw
  32. True
  33. cut a wooden plank
  34. not safe
  35. a protractor
  36. leave tools on the floor
  37. False
  38. False
  39. True
  40. tie back long hair

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids