Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 108 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe
2. 2.Which job is a spirit level for? (a) grip and bend wire (b) turn a screw (c) check a shelf is level (d) cut a wooden plank
3. 3.True or false: to check a shelf is level, use a spirit level. (a) True (b) False
4. 4.True or false: to carry scissors closed is not safe. (a) False (b) True
5. 5.🔧 Which tool would you use to smooth a rough edge? (a) a protractor (b) a tape measure (c) a hand drill (d) sandpaper
6. 6.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) a cap (c) safety goggles (d) sunglasses
7. 7.Which job is a hammer for? (a) check a shelf is level (b) drive in a nail (c) make a hole in wood (d) measure a long length
8. 8.Which job is a protractor for? (a) measure an angle (b) smooth a rough edge (c) cut a wooden plank (d) grip and bend wire
9. 9.True or false: to put tools back after use is not safe. (a) False (b) True
10. 10.🦺 In the workshop, is it safe to use a cracked tool? (a) not safe (b) safe
11. 11.Which job is a hand drill for? (a) measure a long length (b) tighten a nut (c) check a shelf is level (d) make a hole in wood
12. 12.True or false: to leave tools on the floor is safe. (a) False (b) True
13. 13.True or false: to grip and bend wire, use pliers. (a) False (b) True
14. 14.True or false: to touch a hot glue tip is safe. (a) True (b) False
15. 15.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe
16. 16.🔍 Which is the odd one out? (a) tie back long hair (b) let adults use hot glue (c) carry scissors closed (d) leave tools on the floor
17. 17.🦺 How should you carry scissors? (a) points up, open (b) while running (c) points down, closed (d) by the blades
18. 18.🔍 Which is the odd one out? (a) tie back long hair (b) wear safety goggles (c) touch a hot glue tip (d) let adults use hot glue
19. 19.🔧 Which tool would you use to grip and bend wire? (a) pliers (b) sandpaper (c) a hammer (d) a tape measure
20. 20.Which job is a tape measure for? (a) turn a screw (b) measure a long length (c) measure an angle (d) make a hole in wood
21. 21.🔍 Which is the odd one out? (a) tie back long hair (b) use a cracked tool (c) touch a hot glue tip (d) run while holding tools
22. 22.🦺 In the workshop, is it safe to cut towards your hand? (a) safe (b) not safe
23. 23.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) the youngest child (b) a stranger (c) any child alone (d) an adult
24. 24.True or false: to measure a long length, use sandpaper. (a) False (b) True
25. 25.🦺 In the workshop, is it safe to leave tools on the floor? (a) safe (b) not safe
26. 26.🦺 In the workshop, is it safe to carry scissors closed? (a) safe (b) not safe
27. 27.Which job is a spanner for? (a) measure an angle (b) check a shelf is level (c) tighten a nut (d) turn a screw
28. 28.Which job is pliers for? (a) turn a screw (b) measure a long length (c) tighten a nut (d) grip and bend wire
29. 29.🔧 Which tool would you use to turn a screw? (a) a screwdriver (b) a saw (c) a hand drill (d) a spanner
30. 30.🔍 Which is the odd one out? (a) run while holding tools (b) leave tools on the floor (c) touch a hot glue tip (d) cut away from your body
31. 31.🔍 Which is the odd one out? (a) play near a moving drill (b) let adults use hot glue (c) tie back long hair (d) carry scissors closed
32. 32.True or false: to measure a long length, use a hand drill. (a) True (b) False
33. 33.Which job is a saw for? (a) measure an angle (b) cut a wooden plank (c) make a hole in wood (d) grip and bend wire
34. 34.True or false: to cut a wooden plank, use a spirit level. (a) False (b) True
35. 35.True or false: to measure an angle, use a protractor. (a) True (b) False
36. 36.🔧 Which tool would you use to tighten a nut? (a) a hammer (b) a screwdriver (c) a tape measure (d) a spanner
37. 37.🔧 Which tool would you use to drive in a nail? (a) a hammer (b) a spanner (c) a tape measure (d) a screwdriver
38. 38.🔧 Which tool would you use to check a shelf is level? (a) a saw (b) a spirit level (c) a hammer (d) a protractor
39. 39.True or false: to wear safety goggles is safe. (a) False (b) True
40. 40.🦺 In the workshop, is it safe to wear safety goggles? (a) safe (b) not safe

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids