Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 11 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🔍 Which is the odd one out? (a) leave tools on the floor (b) cut away from your body (c) run while holding tools (d) cut towards your hand
2. 2.🔍 Which is the odd one out? (a) use a cracked tool (b) touch a hot glue tip (c) leave tools on the floor (d) wear safety goggles
3. 3.🦺 What protects your eyes when sawing or drilling? (a) sunglasses (b) nothing (c) a cap (d) safety goggles
4. 4.True or false: to make a hole in wood, use a hand drill. (a) False (b) True
5. 5.Which job is a hammer for? (a) smooth a rough edge (b) drive in a nail (c) make a hole in wood (d) turn a screw
6. 6.🦺 In the workshop, is it safe to carry scissors closed? (a) safe (b) not safe
7. 7.True or false: to turn a screw, use a screwdriver. (a) True (b) False
8. 8.🔧 Which tool would you use to measure a long length? (a) a saw (b) a tape measure (c) a hand drill (d) sandpaper
9. 9.🔧 Which tool would you use to measure an angle? (a) pliers (b) a saw (c) a tape measure (d) a protractor
10. 10.🔧 Which tool would you use to cut a wooden plank? (a) a hammer (b) a saw (c) a hand drill (d) a spanner
11. 11.🔧 Which tool would you use to check a shelf is level? (a) a spirit level (b) pliers (c) a hand drill (d) a hammer
12. 12.🦺 In the workshop, is it safe to run while holding tools? (a) safe (b) not safe
13. 13.🦺 In the workshop, is it safe to wear safety goggles? (a) not safe (b) safe
14. 14.🔍 Which is the odd one out? (a) carry scissors closed (b) put tools back after use (c) touch a hot glue tip (d) wear safety goggles
15. 15.Which job is sandpaper for? (a) measure an angle (b) measure a long length (c) smooth a rough edge (d) cut a wooden plank
16. 16.🔧 Which tool would you use to turn a screw? (a) a screwdriver (b) a saw (c) a hand drill (d) a spirit level
17. 17.True or false: to check a shelf is level, use a spirit level. (a) False (b) True
18. 18.True or false: to wear safety goggles is not safe. (a) False (b) True
19. 19.Which job is a screwdriver for? (a) cut a wooden plank (b) check a shelf is level (c) turn a screw (d) grip and bend wire
20. 20.🔍 Which is the odd one out? (a) play near a moving drill (b) clamp wood before sawing (c) carry scissors closed (d) tie back long hair
21. 21.True or false: to grip and bend wire, use pliers. (a) False (b) True
22. 22.Which job is a spanner for? (a) tighten a nut (b) check a shelf is level (c) turn a screw (d) measure an angle
23. 23.🦺 How should you carry scissors? (a) while running (b) points up, open (c) by the blades (d) points down, closed
24. 24.True or false: to tie back long hair is not safe. (a) True (b) False
25. 25.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) a stranger (b) the youngest child (c) an adult (d) any child alone
26. 26.Which job is a tape measure for? (a) tighten a nut (b) drive in a nail (c) measure a long length (d) check a shelf is level
27. 27.🔧 Which tool would you use to grip and bend wire? (a) a spirit level (b) pliers (c) a tape measure (d) a saw
28. 28.True or false: to carry scissors closed is safe. (a) True (b) False
29. 29.Which job is a hand drill for? (a) tighten a nut (b) smooth a rough edge (c) make a hole in wood (d) grip and bend wire
30. 30.🔍 Which is the odd one out? (a) run while holding tools (b) touch a hot glue tip (c) play near a moving drill (d) tie back long hair
31. 31.🔍 Which is the odd one out? (a) carry scissors closed (b) use a cracked tool (c) put tools back after use (d) cut away from your body
32. 32.True or false: to touch a hot glue tip is not safe. (a) True (b) False
33. 33.🔧 Which tool would you use to make a hole in wood? (a) a hand drill (b) a saw (c) a spirit level (d) a screwdriver
34. 34.🔍 Which is the odd one out? (a) put tools back after use (b) cut towards your hand (c) carry scissors closed (d) cut away from your body
35. 35.True or false: to carry scissors closed is not safe. (a) True (b) False
36. 36.True or false: to grip and bend wire, use a protractor. (a) True (b) False
37. 37.True or false: to use a cracked tool is safe. (a) True (b) False
38. 38.True or false: to grip and bend wire, use a screwdriver. (a) True (b) False
39. 39.🦺 In the workshop, is it safe to clamp wood before sawing? (a) not safe (b) safe
40. 40.True or false: to check a shelf is level, use a screwdriver. (a) True (b) False

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids