← Tools and workshop safety lesson New set →

Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 113 · 40 questions
TalentJR

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

NameDateTime takenScore ___ / 40
  1. 1.🔍 Which is the odd one out? (a) tie back long hair (b) use a cracked tool (c) carry scissors closed (d) put tools back after use
  2. 2.🔍 Which is the odd one out? (a) play near a moving drill (b) cut towards your hand (c) cut away from your body (d) leave tools on the floor
  3. 3.🔧 Which tool would you use to grip and bend wire? (a) sandpaper (b) pliers (c) a spanner (d) a protractor
  4. 4.True or false: to turn a screw, use a spanner. (a) False (b) True
  5. 5.🦺 In the workshop, is it safe to wear safety goggles? (a) safe (b) not safe
  6. 6.Which job is a hammer for? (a) tighten a nut (b) drive in a nail (c) grip and bend wire (d) check a shelf is level
  7. 7.True or false: to turn a screw, use a screwdriver. (a) False (b) True
  8. 8.🔧 Which tool would you use to smooth a rough edge? (a) a protractor (b) a spirit level (c) sandpaper (d) pliers
  9. 9.True or false: to cut a wooden plank, use a saw. (a) False (b) True
  10. 10.🦺 In the workshop, is it safe to put tools back after use? (a) not safe (b) safe
  11. 11.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) safety goggles (c) sunglasses (d) a cap
  12. 12.🔍 Which is the odd one out? (a) carry scissors closed (b) wear safety goggles (c) run while holding tools (d) tie back long hair
  13. 13.True or false: to run while holding tools is not safe. (a) True (b) False
  14. 14.🔧 Which tool would you use to measure a long length? (a) a tape measure (b) a hammer (c) sandpaper (d) a protractor
  15. 15.🦺 In the workshop, is it safe to touch a hot glue tip? (a) not safe (b) safe
  16. 16.True or false: to measure a long length, use sandpaper. (a) False (b) True
  17. 17.Which job is a protractor for? (a) tighten a nut (b) check a shelf is level (c) measure an angle (d) cut a wooden plank
  18. 18.🔍 Which is the odd one out? (a) put tools back after use (b) wear safety goggles (c) tie back long hair (d) touch a hot glue tip
  19. 19.🦺 How should you carry scissors? (a) by the blades (b) points down, closed (c) while running (d) points up, open
  20. 20.True or false: to tighten a nut, use a spanner. (a) True (b) False
  21. 21.True or false: to clamp wood before sawing is not safe. (a) True (b) False
  22. 22.🔧 Which tool would you use to cut a wooden plank? (a) sandpaper (b) a saw (c) a spanner (d) a screwdriver
  23. 23.🔍 Which is the odd one out? (a) touch a hot glue tip (b) use a cracked tool (c) run while holding tools (d) wear safety goggles
  24. 24.True or false: to measure an angle, use a saw. (a) True (b) False
  25. 25.Which job is a spirit level for? (a) tighten a nut (b) grip and bend wire (c) check a shelf is level (d) smooth a rough edge
  26. 26.🦺 In the workshop, is it safe to let adults use hot glue? (a) safe (b) not safe
  27. 27.🦺 In the workshop, is it safe to leave tools on the floor? (a) not safe (b) safe
  28. 28.True or false: to cut towards your hand is safe. (a) False (b) True
  29. 29.True or false: to check a shelf is level, use a saw. (a) True (b) False
  30. 30.True or false: to check a shelf is level, use a spirit level. (a) False (b) True
  31. 31.Which job is a saw for? (a) measure an angle (b) grip and bend wire (c) cut a wooden plank (d) check a shelf is level
  32. 32.🦺 In the workshop, is it safe to cut away from your body? (a) not safe (b) safe
  33. 33.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe
  34. 34.True or false: to make a hole in wood, use sandpaper. (a) True (b) False
  35. 35.True or false: to clamp wood before sawing is safe. (a) True (b) False
  36. 36.🔧 Which tool would you use to tighten a nut? (a) a spanner (b) a saw (c) a spirit level (d) a hand drill
  37. 37.🔍 Which is the odd one out? (a) run while holding tools (b) use a cracked tool (c) let adults use hot glue (d) leave tools on the floor
  38. 38.True or false: to let adults use hot glue is safe. (a) False (b) True
  39. 39.Which job is a tape measure for? (a) check a shelf is level (b) measure a long length (c) measure an angle (d) make a hole in wood
  40. 40.True or false: to measure an angle, use pliers. (a) False (b) True

Answer key

  1. use a cracked tool
  2. cut away from your body
  3. pliers
  4. False
  5. safe
  6. drive in a nail
  7. True
  8. sandpaper
  9. True
  10. safe
  11. safety goggles
  12. run while holding tools
  13. True
  14. a tape measure
  15. not safe
  16. False
  17. measure an angle
  18. touch a hot glue tip
  19. points down, closed
  20. True
  21. False
  22. a saw
  23. wear safety goggles
  24. False
  25. check a shelf is level
  26. safe
  27. not safe
  28. False
  29. False
  30. True
  31. cut a wooden plank
  32. safe
  33. safe
  34. False
  35. True
  36. a spanner
  37. let adults use hot glue
  38. True
  39. measure a long length
  40. False

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids