Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 124 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.True or false: to let adults use hot glue is safe. (a) True (b) False
2. 2.🔍 Which is the odd one out? (a) cut away from your body (b) tie back long hair (c) put tools back after use (d) leave tools on the floor
3. 3.Which job is a hand drill for? (a) drive in a nail (b) make a hole in wood (c) grip and bend wire (d) smooth a rough edge
4. 4.🔍 Which is the odd one out? (a) leave tools on the floor (b) wear safety goggles (c) touch a hot glue tip (d) use a cracked tool
5. 5.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) a cap (c) safety goggles (d) sunglasses
6. 6.True or false: to put tools back after use is not safe. (a) False (b) True
7. 7.🔧 Which tool would you use to cut a wooden plank? (a) a tape measure (b) sandpaper (c) a saw (d) a spanner
8. 8.🦺 In the workshop, is it safe to carry scissors closed? (a) not safe (b) safe
9. 9.🦺 How should you carry scissors? (a) points up, open (b) while running (c) points down, closed (d) by the blades
10. 10.🔧 Which tool would you use to drive in a nail? (a) a spirit level (b) a protractor (c) a hammer (d) a saw
11. 11.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe
12. 12.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) any child alone (b) an adult (c) a stranger (d) the youngest child
13. 13.🔧 Which tool would you use to measure a long length? (a) pliers (b) a hammer (c) a screwdriver (d) a tape measure
14. 14.True or false: to leave tools on the floor is safe. (a) True (b) False
15. 15.Which job is a spanner for? (a) tighten a nut (b) smooth a rough edge (c) drive in a nail (d) measure a long length
16. 16.Which job is a hammer for? (a) measure a long length (b) tighten a nut (c) check a shelf is level (d) drive in a nail
17. 17.Which job is a tape measure for? (a) tighten a nut (b) smooth a rough edge (c) grip and bend wire (d) measure a long length
18. 18.True or false: to measure a long length, use a protractor. (a) True (b) False
19. 19.🔍 Which is the odd one out? (a) carry scissors closed (b) cut towards your hand (c) cut away from your body (d) let adults use hot glue
20. 20.True or false: to use a cracked tool is not safe. (a) True (b) False
21. 21.Which job is a protractor for? (a) make a hole in wood (b) turn a screw (c) measure an angle (d) cut a wooden plank
22. 22.True or false: to tighten a nut, use a protractor. (a) False (b) True
23. 23.🦺 In the workshop, is it safe to wear safety goggles? (a) safe (b) not safe
24. 24.🔧 Which tool would you use to check a shelf is level? (a) a tape measure (b) a hand drill (c) a saw (d) a spirit level
25. 25.🦺 In the workshop, is it safe to cut away from your body? (a) not safe (b) safe
26. 26.🔧 Which tool would you use to turn a screw? (a) a screwdriver (b) a saw (c) a spanner (d) a hammer
27. 27.True or false: to make a hole in wood, use a spanner. (a) False (b) True
28. 28.🦺 In the workshop, is it safe to clamp wood before sawing? (a) safe (b) not safe
29. 29.True or false: to carry scissors closed is not safe. (a) False (b) True
30. 30.True or false: to check a shelf is level, use a saw. (a) False (b) True
31. 31.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe
32. 32.🔧 Which tool would you use to grip and bend wire? (a) pliers (b) a hand drill (c) sandpaper (d) a screwdriver
33. 33.True or false: to make a hole in wood, use a protractor. (a) True (b) False
34. 34.Which job is a screwdriver for? (a) measure an angle (b) measure a long length (c) tighten a nut (d) turn a screw
35. 35.True or false: to tighten a nut, use a spanner. (a) False (b) True
36. 36.Which job is pliers for? (a) smooth a rough edge (b) grip and bend wire (c) measure a long length (d) drive in a nail
37. 37.Which job is sandpaper for? (a) measure an angle (b) drive in a nail (c) tighten a nut (d) smooth a rough edge
38. 38.Which job is a saw for? (a) tighten a nut (b) grip and bend wire (c) cut a wooden plank (d) measure an angle
39. 39.True or false: to grip and bend wire, use pliers. (a) False (b) True
40. 40.🔍 Which is the odd one out? (a) cut away from your body (b) touch a hot glue tip (c) let adults use hot glue (d) put tools back after use

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids