Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 128 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🦺 In the workshop, is it safe to carry scissors closed? (a) not safe (b) safe
2. 2.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) safety goggles (c) a cap (d) sunglasses
3. 3.True or false: to wear safety goggles is not safe. (a) False (b) True
4. 4.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) a stranger (b) any child alone (c) an adult (d) the youngest child
5. 5.True or false: to use a cracked tool is not safe. (a) True (b) False
6. 6.True or false: to smooth a rough edge, use sandpaper. (a) False (b) True
7. 7.🔍 Which is the odd one out? (a) clamp wood before sawing (b) leave tools on the floor (c) play near a moving drill (d) run while holding tools
8. 8.🔍 Which is the odd one out? (a) leave tools on the floor (b) cut towards your hand (c) cut away from your body (d) play near a moving drill
9. 9.True or false: to play near a moving drill is safe. (a) False (b) True
10. 10.🔧 Which tool would you use to grip and bend wire? (a) a hammer (b) sandpaper (c) pliers (d) a saw
11. 11.🦺 In the workshop, is it safe to use a cracked tool? (a) safe (b) not safe
12. 12.🔧 Which tool would you use to measure an angle? (a) a spanner (b) a hand drill (c) a protractor (d) a hammer
13. 13.Which job is a saw for? (a) tighten a nut (b) drive in a nail (c) make a hole in wood (d) cut a wooden plank
14. 14.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe
15. 15.Which job is a screwdriver for? (a) measure an angle (b) drive in a nail (c) measure a long length (d) turn a screw
16. 16.🔍 Which is the odd one out? (a) run while holding tools (b) use a cracked tool (c) wear safety goggles (d) cut towards your hand
17. 17.True or false: to make a hole in wood, use a hand drill. (a) False (b) True
18. 18.🦺 In the workshop, is it safe to touch a hot glue tip? (a) safe (b) not safe
19. 19.🔍 Which is the odd one out? (a) let adults use hot glue (b) leave tools on the floor (c) wear safety goggles (d) tie back long hair
20. 20.True or false: to tighten a nut, use pliers. (a) True (b) False
21. 21.🦺 In the workshop, is it safe to play near a moving drill? (a) not safe (b) safe
22. 22.🔍 Which is the odd one out? (a) use a cracked tool (b) run while holding tools (c) cut towards your hand (d) carry scissors closed
23. 23.🔍 Which is the odd one out? (a) leave tools on the floor (b) touch a hot glue tip (c) let adults use hot glue (d) play near a moving drill
24. 24.Which job is a spirit level for? (a) cut a wooden plank (b) tighten a nut (c) drive in a nail (d) check a shelf is level
25. 25.🦺 In the workshop, is it safe to leave tools on the floor? (a) safe (b) not safe
26. 26.🔍 Which is the odd one out? (a) let adults use hot glue (b) play near a moving drill (c) tie back long hair (d) cut away from your body
27. 27.True or false: to tighten a nut, use a spanner. (a) False (b) True
28. 28.🔍 Which is the odd one out? (a) wear safety goggles (b) tie back long hair (c) touch a hot glue tip (d) clamp wood before sawing
29. 29.Which job is a hand drill for? (a) check a shelf is level (b) make a hole in wood (c) measure an angle (d) tighten a nut
30. 30.Which job is a hammer for? (a) smooth a rough edge (b) grip and bend wire (c) measure an angle (d) drive in a nail
31. 31.🔍 Which is the odd one out? (a) wear safety goggles (b) cut away from your body (c) carry scissors closed (d) use a cracked tool
32. 32.Which job is a tape measure for? (a) smooth a rough edge (b) grip and bend wire (c) measure a long length (d) drive in a nail
33. 33.True or false: to cut a wooden plank, use a hand drill. (a) True (b) False
34. 34.Which job is a spanner for? (a) tighten a nut (b) measure an angle (c) check a shelf is level (d) make a hole in wood
35. 35.🦺 In the workshop, is it safe to run while holding tools? (a) not safe (b) safe
36. 36.🦺 How should you carry scissors? (a) by the blades (b) points down, closed (c) points up, open (d) while running
37. 37.🔍 Which is the odd one out? (a) cut away from your body (b) run while holding tools (c) put tools back after use (d) wear safety goggles
38. 38.🔧 Which tool would you use to measure a long length? (a) a hand drill (b) a spirit level (c) sandpaper (d) a tape measure
39. 39.🔍 Which is the odd one out? (a) play near a moving drill (b) put tools back after use (c) run while holding tools (d) leave tools on the floor
40. 40.True or false: to put tools back after use is safe. (a) False (b) True

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids