Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 156 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🔧 Which tool would you use to measure an angle? (a) sandpaper (b) a tape measure (c) a spanner (d) a protractor
2. 2.🦺 In the workshop, is it safe to clamp wood before sawing? (a) not safe (b) safe
3. 3.True or false: to wear safety goggles is safe. (a) True (b) False
4. 4.🦺 In the workshop, is it safe to touch a hot glue tip? (a) not safe (b) safe
5. 5.🔍 Which is the odd one out? (a) play near a moving drill (b) carry scissors closed (c) leave tools on the floor (d) use a cracked tool
6. 6.Which job is a hammer for? (a) turn a screw (b) make a hole in wood (c) drive in a nail (d) measure a long length
7. 7.🦺 In the workshop, is it safe to tie back long hair? (a) safe (b) not safe
8. 8.True or false: to measure an angle, use a protractor. (a) True (b) False
9. 9.🔍 Which is the odd one out? (a) carry scissors closed (b) clamp wood before sawing (c) cut towards your hand (d) cut away from your body
10. 10.True or false: to put tools back after use is not safe. (a) False (b) True
11. 11.True or false: to cut a wooden plank, use a saw. (a) True (b) False
12. 12.True or false: to check a shelf is level, use a spirit level. (a) True (b) False
13. 13.🔧 Which tool would you use to turn a screw? (a) a hammer (b) a hand drill (c) a screwdriver (d) a protractor
14. 14.🔧 Which tool would you use to check a shelf is level? (a) a spirit level (b) sandpaper (c) a hand drill (d) a tape measure
15. 15.True or false: to tie back long hair is not safe. (a) False (b) True
16. 16.True or false: to carry scissors closed is safe. (a) False (b) True
17. 17.🦺 How should you carry scissors? (a) points down, closed (b) while running (c) by the blades (d) points up, open
18. 18.🦺 What protects your eyes when sawing or drilling? (a) a cap (b) nothing (c) sunglasses (d) safety goggles
19. 19.🔧 Which tool would you use to make a hole in wood? (a) a spirit level (b) pliers (c) a hand drill (d) a tape measure
20. 20.Which job is a spirit level for? (a) drive in a nail (b) check a shelf is level (c) measure a long length (d) measure an angle
21. 21.🔧 Which tool would you use to measure a long length? (a) a screwdriver (b) a hand drill (c) a tape measure (d) a protractor
22. 22.True or false: to tighten a nut, use a spanner. (a) False (b) True
23. 23.True or false: to play near a moving drill is not safe. (a) False (b) True
24. 24.Which job is a spanner for? (a) cut a wooden plank (b) measure a long length (c) tighten a nut (d) check a shelf is level
25. 25.True or false: to turn a screw, use a screwdriver. (a) True (b) False
26. 26.True or false: to measure an angle, use a spanner. (a) True (b) False
27. 27.Which job is a protractor for? (a) tighten a nut (b) make a hole in wood (c) measure a long length (d) measure an angle
28. 28.True or false: to use a cracked tool is safe. (a) True (b) False
29. 29.True or false: to grip and bend wire, use pliers. (a) True (b) False
30. 30.Which job is a saw for? (a) grip and bend wire (b) cut a wooden plank (c) measure an angle (d) drive in a nail
31. 31.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe
32. 32.True or false: to make a hole in wood, use a spanner. (a) False (b) True
33. 33.True or false: to cut away from your body is not safe. (a) True (b) False
34. 34.🔍 Which is the odd one out? (a) run while holding tools (b) clamp wood before sawing (c) leave tools on the floor (d) touch a hot glue tip
35. 35.🔍 Which is the odd one out? (a) play near a moving drill (b) leave tools on the floor (c) put tools back after use (d) touch a hot glue tip
36. 36.🔍 Which is the odd one out? (a) let adults use hot glue (b) cut away from your body (c) touch a hot glue tip (d) tie back long hair
37. 37.True or false: to cut a wooden plank, use a screwdriver. (a) False (b) True
38. 38.🔍 Which is the odd one out? (a) run while holding tools (b) cut away from your body (c) use a cracked tool (d) leave tools on the floor
39. 39.🔍 Which is the odd one out? (a) leave tools on the floor (b) wear safety goggles (c) clamp wood before sawing (d) put tools back after use
40. 40.Which job is a tape measure for? (a) drive in a nail (b) measure a long length (c) tighten a nut (d) measure an angle

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids