← Tools and workshop safety lesson New set →

Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 163 · 40 questions
TalentJR

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

NameDateTime takenScore ___ / 40
  1. 1.Which job is a tape measure for? (a) grip and bend wire (b) measure an angle (c) make a hole in wood (d) measure a long length
  2. 2.True or false: to clamp wood before sawing is not safe. (a) False (b) True
  3. 3.True or false: to measure a long length, use a tape measure. (a) False (b) True
  4. 4.True or false: to tie back long hair is safe. (a) True (b) False
  5. 5.Which job is sandpaper for? (a) cut a wooden plank (b) make a hole in wood (c) check a shelf is level (d) smooth a rough edge
  6. 6.🔍 Which is the odd one out? (a) wear safety goggles (b) touch a hot glue tip (c) carry scissors closed (d) let adults use hot glue
  7. 7.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe
  8. 8.🦺 What protects your eyes when sawing or drilling? (a) a cap (b) sunglasses (c) safety goggles (d) nothing
  9. 9.True or false: to leave tools on the floor is not safe. (a) True (b) False
  10. 10.🦺 In the workshop, is it safe to put tools back after use? (a) safe (b) not safe
  11. 11.True or false: to play near a moving drill is safe. (a) False (b) True
  12. 12.True or false: to smooth a rough edge, use sandpaper. (a) True (b) False
  13. 13.🔧 Which tool would you use to measure an angle? (a) a saw (b) a protractor (c) sandpaper (d) a hammer
  14. 14.True or false: to tighten a nut, use a protractor. (a) True (b) False
  15. 15.🔧 Which tool would you use to check a shelf is level? (a) a spirit level (b) sandpaper (c) a hammer (d) a spanner
  16. 16.🦺 In the workshop, is it safe to play near a moving drill? (a) not safe (b) safe
  17. 17.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) any child alone (b) the youngest child (c) an adult (d) a stranger
  18. 18.🔍 Which is the odd one out? (a) carry scissors closed (b) clamp wood before sawing (c) leave tools on the floor (d) let adults use hot glue
  19. 19.🦺 In the workshop, is it safe to use a cracked tool? (a) not safe (b) safe
  20. 20.True or false: to check a shelf is level, use a hand drill. (a) False (b) True
  21. 21.Which job is pliers for? (a) tighten a nut (b) check a shelf is level (c) grip and bend wire (d) cut a wooden plank
  22. 22.🔍 Which is the odd one out? (a) cut towards your hand (b) run while holding tools (c) touch a hot glue tip (d) tie back long hair
  23. 23.🔍 Which is the odd one out? (a) cut away from your body (b) clamp wood before sawing (c) tie back long hair (d) cut towards your hand
  24. 24.True or false: to check a shelf is level, use a protractor. (a) False (b) True
  25. 25.True or false: to turn a screw, use a saw. (a) False (b) True
  26. 26.🔧 Which tool would you use to drive in a nail? (a) a spanner (b) a tape measure (c) a hammer (d) a hand drill
  27. 27.True or false: to cut a wooden plank, use a tape measure. (a) True (b) False
  28. 28.🔧 Which tool would you use to measure a long length? (a) a protractor (b) a tape measure (c) a saw (d) sandpaper
  29. 29.🔍 Which is the odd one out? (a) use a cracked tool (b) touch a hot glue tip (c) wear safety goggles (d) run while holding tools
  30. 30.🦺 How should you carry scissors? (a) points up, open (b) by the blades (c) while running (d) points down, closed
  31. 31.True or false: to use a cracked tool is safe. (a) True (b) False
  32. 32.🔧 Which tool would you use to turn a screw? (a) pliers (b) a saw (c) a screwdriver (d) a hammer
  33. 33.True or false: to clamp wood before sawing is safe. (a) False (b) True
  34. 34.Which job is a saw for? (a) cut a wooden plank (b) grip and bend wire (c) make a hole in wood (d) check a shelf is level
  35. 35.True or false: to play near a moving drill is not safe. (a) False (b) True
  36. 36.True or false: to cut away from your body is safe. (a) False (b) True
  37. 37.🔍 Which is the odd one out? (a) cut away from your body (b) play near a moving drill (c) clamp wood before sawing (d) wear safety goggles
  38. 38.🔧 Which tool would you use to cut a wooden plank? (a) a protractor (b) a saw (c) a spanner (d) sandpaper
  39. 39.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe
  40. 40.🔍 Which is the odd one out? (a) leave tools on the floor (b) cut away from your body (c) cut towards your hand (d) touch a hot glue tip

Answer key

  1. measure a long length
  2. False
  3. True
  4. True
  5. smooth a rough edge
  6. touch a hot glue tip
  7. safe
  8. safety goggles
  9. True
  10. safe
  11. False
  12. True
  13. a protractor
  14. False
  15. a spirit level
  16. not safe
  17. an adult
  18. leave tools on the floor
  19. not safe
  20. False
  21. grip and bend wire
  22. tie back long hair
  23. cut towards your hand
  24. False
  25. False
  26. a hammer
  27. False
  28. a tape measure
  29. wear safety goggles
  30. points down, closed
  31. False
  32. a screwdriver
  33. True
  34. cut a wooden plank
  35. True
  36. True
  37. play near a moving drill
  38. a saw
  39. safe
  40. cut away from your body

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids