Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 167 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) safety goggles (c) a cap (d) sunglasses
2. 2.🔍 Which is the odd one out? (a) wear safety goggles (b) tie back long hair (c) cut away from your body (d) use a cracked tool
3. 3.True or false: to cut away from your body is not safe. (a) False (b) True
4. 4.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) a stranger (b) any child alone (c) the youngest child (d) an adult
5. 5.🔧 Which tool would you use to smooth a rough edge? (a) a spanner (b) a hammer (c) a hand drill (d) sandpaper
6. 6.🦺 In the workshop, is it safe to tie back long hair? (a) safe (b) not safe
7. 7.True or false: to smooth a rough edge, use a hammer. (a) False (b) True
8. 8.🔧 Which tool would you use to measure a long length? (a) sandpaper (b) a tape measure (c) a spirit level (d) a screwdriver
9. 9.True or false: to use a cracked tool is safe. (a) False (b) True
10. 10.Which job is pliers for? (a) smooth a rough edge (b) grip and bend wire (c) make a hole in wood (d) tighten a nut
11. 11.Which job is a saw for? (a) make a hole in wood (b) cut a wooden plank (c) drive in a nail (d) measure a long length
12. 12.🔧 Which tool would you use to cut a wooden plank? (a) a hand drill (b) a hammer (c) a tape measure (d) a saw
13. 13.🔍 Which is the odd one out? (a) cut away from your body (b) carry scissors closed (c) let adults use hot glue (d) leave tools on the floor
14. 14.🦺 In the workshop, is it safe to let adults use hot glue? (a) safe (b) not safe
15. 15.🔧 Which tool would you use to grip and bend wire? (a) sandpaper (b) pliers (c) a hand drill (d) a screwdriver
16. 16.Which job is a protractor for? (a) tighten a nut (b) grip and bend wire (c) smooth a rough edge (d) measure an angle
17. 17.True or false: to cut a wooden plank, use a saw. (a) False (b) True
18. 18.🔧 Which tool would you use to check a shelf is level? (a) a spirit level (b) a spanner (c) a screwdriver (d) a protractor
19. 19.True or false: to grip and bend wire, use a saw. (a) False (b) True
20. 20.True or false: to turn a screw, use a screwdriver. (a) False (b) True
21. 21.Which job is a hammer for? (a) drive in a nail (b) smooth a rough edge (c) turn a screw (d) tighten a nut
22. 22.True or false: to touch a hot glue tip is not safe. (a) False (b) True
23. 23.🔍 Which is the odd one out? (a) carry scissors closed (b) use a cracked tool (c) cut towards your hand (d) touch a hot glue tip
24. 24.🔍 Which is the odd one out? (a) put tools back after use (b) clamp wood before sawing (c) touch a hot glue tip (d) let adults use hot glue
25. 25.True or false: to clamp wood before sawing is safe. (a) True (b) False
26. 26.🔧 Which tool would you use to tighten a nut? (a) a tape measure (b) a spanner (c) a hammer (d) a saw
27. 27.True or false: to check a shelf is level, use a spirit level. (a) False (b) True
28. 28.🦺 In the workshop, is it safe to wear safety goggles? (a) safe (b) not safe
29. 29.🔍 Which is the odd one out? (a) use a cracked tool (b) cut towards your hand (c) play near a moving drill (d) let adults use hot glue
30. 30.True or false: to run while holding tools is not safe. (a) False (b) True
31. 31.🦺 In the workshop, is it safe to carry scissors closed? (a) safe (b) not safe
32. 32.True or false: to measure an angle, use a protractor. (a) False (b) True
33. 33.Which job is a screwdriver for? (a) grip and bend wire (b) turn a screw (c) tighten a nut (d) check a shelf is level
34. 34.🦺 In the workshop, is it safe to clamp wood before sawing? (a) safe (b) not safe
35. 35.🔍 Which is the odd one out? (a) cut towards your hand (b) wear safety goggles (c) run while holding tools (d) leave tools on the floor
36. 36.Which job is a spirit level for? (a) smooth a rough edge (b) drive in a nail (c) make a hole in wood (d) check a shelf is level
37. 37.True or false: to measure a long length, use a protractor. (a) False (b) True
38. 38.Which job is a hand drill for? (a) make a hole in wood (b) measure an angle (c) tighten a nut (d) cut a wooden plank
39. 39.🔧 Which tool would you use to make a hole in wood? (a) a hammer (b) a spanner (c) a hand drill (d) a tape measure
40. 40.Which job is sandpaper for? (a) make a hole in wood (b) smooth a rough edge (c) measure an angle (d) check a shelf is level

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids