Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 172 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🔧 Which tool would you use to turn a screw? (a) a screwdriver (b) a protractor (c) a hammer (d) a spirit level
2. 2.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe
3. 3.True or false: to run while holding tools is not safe. (a) True (b) False
4. 4.🔍 Which is the odd one out? (a) touch a hot glue tip (b) clamp wood before sawing (c) cut away from your body (d) tie back long hair
5. 5.True or false: to cut towards your hand is safe. (a) False (b) True
6. 6.Which job is a spirit level for? (a) turn a screw (b) cut a wooden plank (c) check a shelf is level (d) grip and bend wire
7. 7.Which job is a saw for? (a) tighten a nut (b) make a hole in wood (c) check a shelf is level (d) cut a wooden plank
8. 8.🦺 In the workshop, is it safe to wear safety goggles? (a) not safe (b) safe
9. 9.🦺 In the workshop, is it safe to cut away from your body? (a) not safe (b) safe
10. 10.True or false: to tighten a nut, use a spanner. (a) False (b) True
11. 11.True or false: to check a shelf is level, use a spirit level. (a) True (b) False
12. 12.True or false: to wear safety goggles is not safe. (a) False (b) True
13. 13.True or false: to wear safety goggles is safe. (a) True (b) False
14. 14.🦺 In the workshop, is it safe to clamp wood before sawing? (a) not safe (b) safe
15. 15.🦺 How should you carry scissors? (a) by the blades (b) while running (c) points up, open (d) points down, closed
16. 16.True or false: to cut a wooden plank, use a protractor. (a) False (b) True
17. 17.🦺 In the workshop, is it safe to leave tools on the floor? (a) not safe (b) safe
18. 18.Which job is a hammer for? (a) turn a screw (b) check a shelf is level (c) tighten a nut (d) drive in a nail
19. 19.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) safety goggles (c) sunglasses (d) a cap
20. 20.🔧 Which tool would you use to drive in a nail? (a) a hammer (b) a screwdriver (c) a hand drill (d) sandpaper
21. 21.🔍 Which is the odd one out? (a) carry scissors closed (b) let adults use hot glue (c) wear safety goggles (d) play near a moving drill
22. 22.🦺 In the workshop, is it safe to put tools back after use? (a) safe (b) not safe
23. 23.True or false: to cut towards your hand is not safe. (a) True (b) False
24. 24.🔍 Which is the odd one out? (a) play near a moving drill (b) put tools back after use (c) leave tools on the floor (d) cut towards your hand
25. 25.🔧 Which tool would you use to check a shelf is level? (a) a spirit level (b) a spanner (c) a screwdriver (d) a tape measure
26. 26.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) any child alone (b) the youngest child (c) a stranger (d) an adult
27. 27.🔧 Which tool would you use to cut a wooden plank? (a) a hammer (b) a saw (c) pliers (d) a spanner
28. 28.🔍 Which is the odd one out? (a) play near a moving drill (b) run while holding tools (c) tie back long hair (d) touch a hot glue tip
29. 29.🔧 Which tool would you use to measure a long length? (a) a spirit level (b) a screwdriver (c) sandpaper (d) a tape measure
30. 30.True or false: to measure an angle, use a tape measure. (a) True (b) False
31. 31.🔍 Which is the odd one out? (a) use a cracked tool (b) wear safety goggles (c) leave tools on the floor (d) run while holding tools
32. 32.🦺 In the workshop, is it safe to play near a moving drill? (a) not safe (b) safe
33. 33.🦺 In the workshop, is it safe to run while holding tools? (a) safe (b) not safe
34. 34.Which job is a screwdriver for? (a) turn a screw (b) tighten a nut (c) make a hole in wood (d) grip and bend wire
35. 35.🔍 Which is the odd one out? (a) tie back long hair (b) carry scissors closed (c) leave tools on the floor (d) put tools back after use
36. 36.Which job is a tape measure for? (a) measure a long length (b) turn a screw (c) measure an angle (d) cut a wooden plank
37. 37.True or false: to use a cracked tool is not safe. (a) False (b) True
38. 38.True or false: to cut a wooden plank, use a saw. (a) False (b) True
39. 39.🔍 Which is the odd one out? (a) use a cracked tool (b) let adults use hot glue (c) tie back long hair (d) clamp wood before sawing
40. 40.Which job is a spanner for? (a) check a shelf is level (b) measure an angle (c) tighten a nut (d) cut a wooden plank

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids