Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 177 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.Which job is a hand drill for? (a) check a shelf is level (b) cut a wooden plank (c) make a hole in wood (d) measure a long length
2. 2.🔧 Which tool would you use to tighten a nut? (a) a spanner (b) a tape measure (c) pliers (d) a screwdriver
3. 3.True or false: to smooth a rough edge, use a screwdriver. (a) True (b) False
4. 4.Which job is a tape measure for? (a) cut a wooden plank (b) drive in a nail (c) measure a long length (d) check a shelf is level
5. 5.🦺 What protects your eyes when sawing or drilling? (a) sunglasses (b) nothing (c) a cap (d) safety goggles
6. 6.Which job is a saw for? (a) measure an angle (b) check a shelf is level (c) cut a wooden plank (d) smooth a rough edge
7. 7.Which job is a screwdriver for? (a) check a shelf is level (b) measure an angle (c) make a hole in wood (d) turn a screw
8. 8.🦺 In the workshop, is it safe to wear safety goggles? (a) not safe (b) safe
9. 9.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) the youngest child (b) any child alone (c) an adult (d) a stranger
10. 10.Which job is pliers for? (a) turn a screw (b) measure an angle (c) grip and bend wire (d) drive in a nail
11. 11.True or false: to run while holding tools is not safe. (a) False (b) True
12. 12.🔧 Which tool would you use to drive in a nail? (a) a protractor (b) sandpaper (c) a tape measure (d) a hammer
13. 13.🦺 How should you carry scissors? (a) points up, open (b) by the blades (c) while running (d) points down, closed
14. 14.🔧 Which tool would you use to make a hole in wood? (a) a hand drill (b) a hammer (c) a tape measure (d) a spanner
15. 15.🔍 Which is the odd one out? (a) wear safety goggles (b) cut towards your hand (c) carry scissors closed (d) tie back long hair
16. 16.🦺 In the workshop, is it safe to run while holding tools? (a) safe (b) not safe
17. 17.True or false: to use a cracked tool is not safe. (a) False (b) True
18. 18.🔧 Which tool would you use to cut a wooden plank? (a) a spirit level (b) a saw (c) a protractor (d) a screwdriver
19. 19.🦺 In the workshop, is it safe to carry scissors closed? (a) not safe (b) safe
20. 20.Which job is a spirit level for? (a) tighten a nut (b) check a shelf is level (c) smooth a rough edge (d) grip and bend wire
21. 21.🔍 Which is the odd one out? (a) play near a moving drill (b) put tools back after use (c) let adults use hot glue (d) wear safety goggles
22. 22.True or false: to make a hole in wood, use a hand drill. (a) True (b) False
23. 23.Which job is a spanner for? (a) check a shelf is level (b) make a hole in wood (c) measure an angle (d) tighten a nut
24. 24.🔍 Which is the odd one out? (a) use a cracked tool (b) clamp wood before sawing (c) run while holding tools (d) touch a hot glue tip
25. 25.🔧 Which tool would you use to measure an angle? (a) a hammer (b) a spirit level (c) a protractor (d) a spanner
26. 26.True or false: to leave tools on the floor is safe. (a) True (b) False
27. 27.🦺 In the workshop, is it safe to cut towards your hand? (a) not safe (b) safe
28. 28.🔍 Which is the odd one out? (a) clamp wood before sawing (b) run while holding tools (c) tie back long hair (d) wear safety goggles
29. 29.True or false: to tie back long hair is not safe. (a) False (b) True
30. 30.Which job is a hammer for? (a) cut a wooden plank (b) drive in a nail (c) measure a long length (d) tighten a nut
31. 31.🔍 Which is the odd one out? (a) use a cracked tool (b) leave tools on the floor (c) touch a hot glue tip (d) cut away from your body
32. 32.True or false: to tighten a nut, use a saw. (a) False (b) True
33. 33.🦺 In the workshop, is it safe to use a cracked tool? (a) not safe (b) safe
34. 34.True or false: to play near a moving drill is safe. (a) True (b) False
35. 35.🔧 Which tool would you use to smooth a rough edge? (a) a spanner (b) a spirit level (c) sandpaper (d) a hammer
36. 36.🔧 Which tool would you use to check a shelf is level? (a) a protractor (b) a spirit level (c) a screwdriver (d) a hammer
37. 37.True or false: to check a shelf is level, use a screwdriver. (a) True (b) False
38. 38.🦺 In the workshop, is it safe to touch a hot glue tip? (a) safe (b) not safe
39. 39.Which job is a protractor for? (a) measure an angle (b) make a hole in wood (c) tighten a nut (d) turn a screw
40. 40.🔍 Which is the odd one out? (a) run while holding tools (b) carry scissors closed (c) use a cracked tool (d) cut towards your hand

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids