Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 215 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🔍 Which is the odd one out? (a) play near a moving drill (b) cut towards your hand (c) clamp wood before sawing (d) run while holding tools
2. 2.🦺 In the workshop, is it safe to touch a hot glue tip? (a) not safe (b) safe
3. 3.True or false: to cut towards your hand is safe. (a) False (b) True
4. 4.🔧 Which tool would you use to cut a wooden plank? (a) sandpaper (b) pliers (c) a tape measure (d) a saw
5. 5.🔍 Which is the odd one out? (a) touch a hot glue tip (b) tie back long hair (c) clamp wood before sawing (d) cut away from your body
6. 6.Which job is a saw for? (a) grip and bend wire (b) tighten a nut (c) cut a wooden plank (d) smooth a rough edge
7. 7.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) sunglasses (c) a cap (d) safety goggles
8. 8.True or false: to clamp wood before sawing is safe. (a) False (b) True
9. 9.🔧 Which tool would you use to smooth a rough edge? (a) a screwdriver (b) a hammer (c) sandpaper (d) a hand drill
10. 10.True or false: to tie back long hair is safe. (a) False (b) True
11. 11.🔍 Which is the odd one out? (a) leave tools on the floor (b) cut away from your body (c) wear safety goggles (d) tie back long hair
12. 12.True or false: to let adults use hot glue is safe. (a) False (b) True
13. 13.True or false: to cut away from your body is not safe. (a) False (b) True
14. 14.🔍 Which is the odd one out? (a) wear safety goggles (b) play near a moving drill (c) clamp wood before sawing (d) put tools back after use
15. 15.True or false: to run while holding tools is safe. (a) False (b) True
16. 16.🔧 Which tool would you use to turn a screw? (a) sandpaper (b) pliers (c) a hand drill (d) a screwdriver
17. 17.Which job is a screwdriver for? (a) tighten a nut (b) turn a screw (c) smooth a rough edge (d) measure a long length
18. 18.🔍 Which is the odd one out? (a) carry scissors closed (b) clamp wood before sawing (c) put tools back after use (d) run while holding tools
19. 19.Which job is a hand drill for? (a) smooth a rough edge (b) make a hole in wood (c) tighten a nut (d) turn a screw
20. 20.🔍 Which is the odd one out? (a) run while holding tools (b) touch a hot glue tip (c) leave tools on the floor (d) cut away from your body
21. 21.Which job is a spirit level for? (a) grip and bend wire (b) turn a screw (c) check a shelf is level (d) make a hole in wood
22. 22.True or false: to measure a long length, use a hand drill. (a) False (b) True
23. 23.True or false: to check a shelf is level, use a hammer. (a) True (b) False
24. 24.🔧 Which tool would you use to grip and bend wire? (a) a saw (b) pliers (c) a hand drill (d) a hammer
25. 25.Which job is a spanner for? (a) measure an angle (b) measure a long length (c) smooth a rough edge (d) tighten a nut
26. 26.Which job is sandpaper for? (a) smooth a rough edge (b) measure a long length (c) measure an angle (d) tighten a nut
27. 27.🔍 Which is the odd one out? (a) carry scissors closed (b) use a cracked tool (c) wear safety goggles (d) put tools back after use
28. 28.True or false: to drive in a nail, use a hand drill. (a) True (b) False
29. 29.True or false: to carry scissors closed is not safe. (a) True (b) False
30. 30.🦺 In the workshop, is it safe to carry scissors closed? (a) not safe (b) safe
31. 31.🔍 Which is the odd one out? (a) leave tools on the floor (b) use a cracked tool (c) cut towards your hand (d) put tools back after use
32. 32.🦺 How should you carry scissors? (a) by the blades (b) points down, closed (c) points up, open (d) while running
33. 33.True or false: to tighten a nut, use a spanner. (a) True (b) False
34. 34.True or false: to turn a screw, use a spirit level. (a) False (b) True
35. 35.🔧 Which tool would you use to check a shelf is level? (a) a tape measure (b) a hammer (c) a spirit level (d) pliers
36. 36.🦺 In the workshop, is it safe to use a cracked tool? (a) safe (b) not safe
37. 37.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) the youngest child (b) a stranger (c) an adult (d) any child alone
38. 38.🔍 Which is the odd one out? (a) wear safety goggles (b) play near a moving drill (c) run while holding tools (d) leave tools on the floor
39. 39.Which job is a protractor for? (a) smooth a rough edge (b) make a hole in wood (c) measure an angle (d) check a shelf is level
40. 40.True or false: to clamp wood before sawing is not safe. (a) True (b) False

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids