Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 228 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.True or false: to grip and bend wire, use a protractor. (a) True (b) False
2. 2.🔧 Which tool would you use to grip and bend wire? (a) sandpaper (b) a hammer (c) a tape measure (d) pliers
3. 3.Which job is a spirit level for? (a) make a hole in wood (b) check a shelf is level (c) turn a screw (d) grip and bend wire
4. 4.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) a cap (c) sunglasses (d) safety goggles
5. 5.🔍 Which is the odd one out? (a) play near a moving drill (b) cut towards your hand (c) clamp wood before sawing (d) leave tools on the floor
6. 6.🔧 Which tool would you use to measure a long length? (a) a spirit level (b) sandpaper (c) a hand drill (d) a tape measure
7. 7.🔧 Which tool would you use to make a hole in wood? (a) a protractor (b) a spanner (c) a hand drill (d) a tape measure
8. 8.🔍 Which is the odd one out? (a) touch a hot glue tip (b) put tools back after use (c) cut towards your hand (d) leave tools on the floor
9. 9.🦺 In the workshop, is it safe to run while holding tools? (a) not safe (b) safe
10. 10.🦺 In the workshop, is it safe to leave tools on the floor? (a) not safe (b) safe
11. 11.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) the youngest child (b) a stranger (c) any child alone (d) an adult
12. 12.Which job is a hammer for? (a) grip and bend wire (b) cut a wooden plank (c) tighten a nut (d) drive in a nail
13. 13.🔍 Which is the odd one out? (a) leave tools on the floor (b) play near a moving drill (c) carry scissors closed (d) run while holding tools
14. 14.True or false: to carry scissors closed is safe. (a) False (b) True
15. 15.🔧 Which tool would you use to check a shelf is level? (a) a spirit level (b) a saw (c) a hammer (d) a protractor
16. 16.Which job is a spanner for? (a) tighten a nut (b) check a shelf is level (c) smooth a rough edge (d) grip and bend wire
17. 17.True or false: to cut away from your body is safe. (a) True (b) False
18. 18.True or false: to cut away from your body is not safe. (a) False (b) True
19. 19.True or false: to touch a hot glue tip is safe. (a) False (b) True
20. 20.Which job is a hand drill for? (a) grip and bend wire (b) drive in a nail (c) make a hole in wood (d) smooth a rough edge
21. 21.🔍 Which is the odd one out? (a) clamp wood before sawing (b) tie back long hair (c) carry scissors closed (d) leave tools on the floor
22. 22.True or false: to tighten a nut, use a tape measure. (a) False (b) True
23. 23.Which job is a tape measure for? (a) grip and bend wire (b) measure a long length (c) check a shelf is level (d) turn a screw
24. 24.True or false: to tighten a nut, use pliers. (a) False (b) True
25. 25.🦺 In the workshop, is it safe to let adults use hot glue? (a) safe (b) not safe
26. 26.True or false: to measure a long length, use a spirit level. (a) True (b) False
27. 27.Which job is pliers for? (a) grip and bend wire (b) tighten a nut (c) measure an angle (d) drive in a nail
28. 28.🦺 In the workshop, is it safe to tie back long hair? (a) safe (b) not safe
29. 29.🔍 Which is the odd one out? (a) carry scissors closed (b) play near a moving drill (c) cut away from your body (d) clamp wood before sawing
30. 30.🔧 Which tool would you use to turn a screw? (a) a saw (b) a hand drill (c) a spirit level (d) a screwdriver
31. 31.🔍 Which is the odd one out? (a) use a cracked tool (b) touch a hot glue tip (c) let adults use hot glue (d) cut towards your hand
32. 32.Which job is a saw for? (a) cut a wooden plank (b) make a hole in wood (c) turn a screw (d) measure a long length
33. 33.🦺 In the workshop, is it safe to cut away from your body? (a) not safe (b) safe
34. 34.Which job is a screwdriver for? (a) turn a screw (b) tighten a nut (c) check a shelf is level (d) smooth a rough edge
35. 35.🔍 Which is the odd one out? (a) clamp wood before sawing (b) cut towards your hand (c) cut away from your body (d) put tools back after use
36. 36.🔍 Which is the odd one out? (a) carry scissors closed (b) put tools back after use (c) run while holding tools (d) wear safety goggles
37. 37.True or false: to drive in a nail, use a screwdriver. (a) False (b) True
38. 38.🔍 Which is the odd one out? (a) put tools back after use (b) touch a hot glue tip (c) tie back long hair (d) cut away from your body
39. 39.🦺 How should you carry scissors? (a) while running (b) points up, open (c) by the blades (d) points down, closed
40. 40.True or false: to cut towards your hand is safe. (a) False (b) True

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids