Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 278 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.True or false: to cut towards your hand is safe. (a) False (b) True
2. 2.🔍 Which is the odd one out? (a) leave tools on the floor (b) touch a hot glue tip (c) cut towards your hand (d) put tools back after use
3. 3.🦺 In the workshop, is it safe to run while holding tools? (a) safe (b) not safe
4. 4.🔍 Which is the odd one out? (a) wear safety goggles (b) put tools back after use (c) touch a hot glue tip (d) clamp wood before sawing
5. 5.🔍 Which is the odd one out? (a) cut away from your body (b) cut towards your hand (c) run while holding tools (d) use a cracked tool
6. 6.🦺 What protects your eyes when sawing or drilling? (a) sunglasses (b) nothing (c) a cap (d) safety goggles
7. 7.Which job is a spirit level for? (a) grip and bend wire (b) check a shelf is level (c) drive in a nail (d) measure an angle
8. 8.Which job is a protractor for? (a) grip and bend wire (b) tighten a nut (c) measure an angle (d) smooth a rough edge
9. 9.🔧 Which tool would you use to tighten a nut? (a) a spanner (b) a spirit level (c) pliers (d) a saw
10. 10.True or false: to tie back long hair is not safe. (a) True (b) False
11. 11.🔍 Which is the odd one out? (a) clamp wood before sawing (b) wear safety goggles (c) run while holding tools (d) tie back long hair
12. 12.🦺 In the workshop, is it safe to use a cracked tool? (a) safe (b) not safe
13. 13.Which job is a screwdriver for? (a) measure an angle (b) turn a screw (c) drive in a nail (d) grip and bend wire
14. 14.True or false: to turn a screw, use a screwdriver. (a) False (b) True
15. 15.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) an adult (b) a stranger (c) any child alone (d) the youngest child
16. 16.Which job is a saw for? (a) turn a screw (b) grip and bend wire (c) cut a wooden plank (d) measure a long length
17. 17.🔧 Which tool would you use to smooth a rough edge? (a) a tape measure (b) a hand drill (c) a spanner (d) sandpaper
18. 18.🦺 How should you carry scissors? (a) by the blades (b) while running (c) points up, open (d) points down, closed
19. 19.🔧 Which tool would you use to measure an angle? (a) pliers (b) a protractor (c) a saw (d) sandpaper
20. 20.🔧 Which tool would you use to grip and bend wire? (a) pliers (b) a spirit level (c) a protractor (d) a saw
21. 21.🦺 In the workshop, is it safe to play near a moving drill? (a) safe (b) not safe
22. 22.Which job is a hand drill for? (a) grip and bend wire (b) make a hole in wood (c) measure an angle (d) check a shelf is level
23. 23.🔧 Which tool would you use to turn a screw? (a) a screwdriver (b) sandpaper (c) a protractor (d) pliers
24. 24.True or false: to drive in a nail, use a screwdriver. (a) False (b) True
25. 25.True or false: to cut a wooden plank, use a saw. (a) True (b) False
26. 26.🔍 Which is the odd one out? (a) run while holding tools (b) play near a moving drill (c) wear safety goggles (d) leave tools on the floor
27. 27.True or false: to let adults use hot glue is not safe. (a) True (b) False
28. 28.🔍 Which is the odd one out? (a) cut towards your hand (b) tie back long hair (c) touch a hot glue tip (d) leave tools on the floor
29. 29.Which job is a spanner for? (a) tighten a nut (b) measure a long length (c) smooth a rough edge (d) cut a wooden plank
30. 30.🔧 Which tool would you use to cut a wooden plank? (a) a protractor (b) a hand drill (c) a saw (d) sandpaper
31. 31.Which job is pliers for? (a) make a hole in wood (b) measure a long length (c) grip and bend wire (d) check a shelf is level
32. 32.🔍 Which is the odd one out? (a) cut towards your hand (b) clamp wood before sawing (c) wear safety goggles (d) cut away from your body
33. 33.🦺 In the workshop, is it safe to wear safety goggles? (a) safe (b) not safe
34. 34.True or false: to leave tools on the floor is safe. (a) True (b) False
35. 35.Which job is a hammer for? (a) drive in a nail (b) tighten a nut (c) measure a long length (d) turn a screw
36. 36.True or false: to run while holding tools is safe. (a) False (b) True
37. 37.Which job is sandpaper for? (a) measure an angle (b) smooth a rough edge (c) cut a wooden plank (d) turn a screw
38. 38.🔧 Which tool would you use to check a shelf is level? (a) a hammer (b) a tape measure (c) a spirit level (d) pliers
39. 39.True or false: to drive in a nail, use a protractor. (a) True (b) False
40. 40.🔍 Which is the odd one out? (a) wear safety goggles (b) clamp wood before sawing (c) use a cracked tool (d) tie back long hair

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids