Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 308 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.Which job is a spirit level for? (a) check a shelf is level (b) grip and bend wire (c) measure a long length (d) measure an angle
2. 2.Which job is pliers for? (a) make a hole in wood (b) measure an angle (c) turn a screw (d) grip and bend wire
3. 3.True or false: to cut away from your body is safe. (a) True (b) False
4. 4.🔍 Which is the odd one out? (a) put tools back after use (b) run while holding tools (c) tie back long hair (d) carry scissors closed
5. 5.🦺 In the workshop, is it safe to use a cracked tool? (a) not safe (b) safe
6. 6.Which job is a tape measure for? (a) smooth a rough edge (b) measure a long length (c) tighten a nut (d) grip and bend wire
7. 7.🦺 In the workshop, is it safe to clamp wood before sawing? (a) not safe (b) safe
8. 8.🔍 Which is the odd one out? (a) use a cracked tool (b) carry scissors closed (c) wear safety goggles (d) put tools back after use
9. 9.🦺 In the workshop, is it safe to run while holding tools? (a) safe (b) not safe
10. 10.True or false: to run while holding tools is not safe. (a) True (b) False
11. 11.True or false: to smooth a rough edge, use a hammer. (a) True (b) False
12. 12.🦺 How should you carry scissors? (a) points up, open (b) by the blades (c) while running (d) points down, closed
13. 13.True or false: to make a hole in wood, use a hand drill. (a) True (b) False
14. 14.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe
15. 15.🔧 Which tool would you use to tighten a nut? (a) a spanner (b) a tape measure (c) a hand drill (d) sandpaper
16. 16.Which job is a hand drill for? (a) smooth a rough edge (b) make a hole in wood (c) measure an angle (d) tighten a nut
17. 17.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) safety goggles (c) a cap (d) sunglasses
18. 18.🦺 In the workshop, is it safe to wear safety goggles? (a) safe (b) not safe
19. 19.🔧 Which tool would you use to measure a long length? (a) a screwdriver (b) a protractor (c) a tape measure (d) sandpaper
20. 20.True or false: to let adults use hot glue is safe. (a) True (b) False
21. 21.🔍 Which is the odd one out? (a) run while holding tools (b) cut towards your hand (c) use a cracked tool (d) let adults use hot glue
22. 22.🔍 Which is the odd one out? (a) cut towards your hand (b) touch a hot glue tip (c) run while holding tools (d) wear safety goggles
23. 23.True or false: to wear safety goggles is safe. (a) False (b) True
24. 24.🦺 In the workshop, is it safe to cut away from your body? (a) not safe (b) safe
25. 25.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) the youngest child (b) an adult (c) a stranger (d) any child alone
26. 26.🔍 Which is the odd one out? (a) play near a moving drill (b) tie back long hair (c) cut towards your hand (d) run while holding tools
27. 27.🔍 Which is the odd one out? (a) tie back long hair (b) cut away from your body (c) put tools back after use (d) cut towards your hand
28. 28.🔧 Which tool would you use to cut a wooden plank? (a) a hand drill (b) a protractor (c) sandpaper (d) a saw
29. 29.True or false: to smooth a rough edge, use a tape measure. (a) False (b) True
30. 30.🦺 In the workshop, is it safe to let adults use hot glue? (a) safe (b) not safe
31. 31.🔧 Which tool would you use to measure an angle? (a) sandpaper (b) a tape measure (c) a saw (d) a protractor
32. 32.Which job is a spanner for? (a) check a shelf is level (b) drive in a nail (c) measure a long length (d) tighten a nut
33. 33.🔍 Which is the odd one out? (a) cut towards your hand (b) run while holding tools (c) put tools back after use (d) use a cracked tool
34. 34.True or false: to leave tools on the floor is not safe. (a) False (b) True
35. 35.🔍 Which is the odd one out? (a) clamp wood before sawing (b) leave tools on the floor (c) cut away from your body (d) let adults use hot glue
36. 36.🔧 Which tool would you use to make a hole in wood? (a) a hand drill (b) a screwdriver (c) pliers (d) a saw
37. 37.True or false: to play near a moving drill is safe. (a) False (b) True
38. 38.🔍 Which is the odd one out? (a) run while holding tools (b) carry scissors closed (c) cut towards your hand (d) leave tools on the floor
39. 39.Which job is a screwdriver for? (a) smooth a rough edge (b) cut a wooden plank (c) turn a screw (d) tighten a nut
40. 40.🦺 In the workshop, is it safe to cut towards your hand? (a) not safe (b) safe

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids