Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 31 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🔧 Which tool would you use to tighten a nut? (a) a protractor (b) a tape measure (c) pliers (d) a spanner
2. 2.True or false: to grip and bend wire, use pliers. (a) True (b) False
3. 3.🔧 Which tool would you use to turn a screw? (a) a protractor (b) a screwdriver (c) a saw (d) a spanner
4. 4.Which job is pliers for? (a) grip and bend wire (b) measure a long length (c) turn a screw (d) smooth a rough edge
5. 5.True or false: to run while holding tools is safe. (a) False (b) True
6. 6.🦺 What protects your eyes when sawing or drilling? (a) sunglasses (b) safety goggles (c) a cap (d) nothing
7. 7.🔍 Which is the odd one out? (a) run while holding tools (b) play near a moving drill (c) cut away from your body (d) cut towards your hand
8. 8.🔧 Which tool would you use to smooth a rough edge? (a) a hammer (b) sandpaper (c) a saw (d) a spirit level
9. 9.🦺 In the workshop, is it safe to touch a hot glue tip? (a) safe (b) not safe
10. 10.🔧 Which tool would you use to measure a long length? (a) a protractor (b) a hand drill (c) a screwdriver (d) a tape measure
11. 11.True or false: to wear safety goggles is safe. (a) False (b) True
12. 12.Which job is a hand drill for? (a) measure a long length (b) smooth a rough edge (c) make a hole in wood (d) check a shelf is level
13. 13.🔍 Which is the odd one out? (a) use a cracked tool (b) clamp wood before sawing (c) cut towards your hand (d) touch a hot glue tip
14. 14.🦺 How should you carry scissors? (a) points up, open (b) by the blades (c) while running (d) points down, closed
15. 15.True or false: to leave tools on the floor is not safe. (a) True (b) False
16. 16.🦺 In the workshop, is it safe to clamp wood before sawing? (a) not safe (b) safe
17. 17.🔍 Which is the odd one out? (a) put tools back after use (b) leave tools on the floor (c) let adults use hot glue (d) carry scissors closed
18. 18.True or false: to cut a wooden plank, use a spanner. (a) False (b) True
19. 19.Which job is a screwdriver for? (a) smooth a rough edge (b) cut a wooden plank (c) turn a screw (d) make a hole in wood
20. 20.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe
21. 21.Which job is a spirit level for? (a) drive in a nail (b) tighten a nut (c) check a shelf is level (d) cut a wooden plank
22. 22.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) an adult (b) a stranger (c) the youngest child (d) any child alone
23. 23.🔍 Which is the odd one out? (a) use a cracked tool (b) cut towards your hand (c) tie back long hair (d) play near a moving drill
24. 24.True or false: to turn a screw, use a screwdriver. (a) False (b) True
25. 25.True or false: to cut away from your body is not safe. (a) False (b) True
26. 26.True or false: to cut a wooden plank, use a saw. (a) False (b) True
27. 27.🦺 In the workshop, is it safe to cut towards your hand? (a) safe (b) not safe
28. 28.🔍 Which is the odd one out? (a) tie back long hair (b) wear safety goggles (c) clamp wood before sawing (d) touch a hot glue tip
29. 29.Which job is sandpaper for? (a) turn a screw (b) smooth a rough edge (c) measure a long length (d) check a shelf is level
30. 30.🔧 Which tool would you use to measure an angle? (a) a hand drill (b) a saw (c) a screwdriver (d) a protractor
31. 31.🔍 Which is the odd one out? (a) carry scissors closed (b) run while holding tools (c) clamp wood before sawing (d) tie back long hair
32. 32.🔍 Which is the odd one out? (a) wear safety goggles (b) carry scissors closed (c) play near a moving drill (d) let adults use hot glue
33. 33.True or false: to touch a hot glue tip is not safe. (a) False (b) True
34. 34.True or false: to put tools back after use is not safe. (a) True (b) False
35. 35.Which job is a saw for? (a) measure a long length (b) cut a wooden plank (c) turn a screw (d) check a shelf is level
36. 36.Which job is a hammer for? (a) drive in a nail (b) turn a screw (c) tighten a nut (d) make a hole in wood
37. 37.🔧 Which tool would you use to grip and bend wire? (a) pliers (b) a hand drill (c) a tape measure (d) a protractor
38. 38.🔍 Which is the odd one out? (a) touch a hot glue tip (b) play near a moving drill (c) cut towards your hand (d) put tools back after use
39. 39.🔧 Which tool would you use to make a hole in wood? (a) a hand drill (b) a protractor (c) a saw (d) a tape measure
40. 40.🦺 In the workshop, is it safe to run while holding tools? (a) not safe (b) safe

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids