← Tools and workshop safety lesson New set →

Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 324 · 40 questions
TalentJR

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

NameDateTime takenScore ___ / 40
  1. 1.🦺 What protects your eyes when sawing or drilling? (a) nothing (b) safety goggles (c) sunglasses (d) a cap
  2. 2.🔍 Which is the odd one out? (a) wear safety goggles (b) touch a hot glue tip (c) cut away from your body (d) carry scissors closed
  3. 3.Which job is a spanner for? (a) measure a long length (b) turn a screw (c) tighten a nut (d) check a shelf is level
  4. 4.🔧 Which tool would you use to tighten a nut? (a) pliers (b) a spanner (c) sandpaper (d) a spirit level
  5. 5.Which job is pliers for? (a) grip and bend wire (b) check a shelf is level (c) turn a screw (d) make a hole in wood
  6. 6.True or false: to carry scissors closed is safe. (a) False (b) True
  7. 7.Which job is a hammer for? (a) cut a wooden plank (b) grip and bend wire (c) check a shelf is level (d) drive in a nail
  8. 8.🔍 Which is the odd one out? (a) play near a moving drill (b) cut towards your hand (c) use a cracked tool (d) clamp wood before sawing
  9. 9.🔧 Which tool would you use to check a shelf is level? (a) a screwdriver (b) sandpaper (c) a spirit level (d) a protractor
  10. 10.True or false: to drive in a nail, use a spirit level. (a) False (b) True
  11. 11.True or false: to measure a long length, use a protractor. (a) False (b) True
  12. 12.True or false: to check a shelf is level, use a spirit level. (a) False (b) True
  13. 13.True or false: to let adults use hot glue is not safe. (a) False (b) True
  14. 14.🔧 Which tool would you use to measure an angle? (a) a protractor (b) a saw (c) a spanner (d) a hammer
  15. 15.🦺 In the workshop, is it safe to cut towards your hand? (a) safe (b) not safe
  16. 16.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) any child alone (b) the youngest child (c) a stranger (d) an adult
  17. 17.True or false: to make a hole in wood, use a saw. (a) False (b) True
  18. 18.True or false: to play near a moving drill is not safe. (a) True (b) False
  19. 19.True or false: to put tools back after use is safe. (a) False (b) True
  20. 20.🔍 Which is the odd one out? (a) cut away from your body (b) run while holding tools (c) put tools back after use (d) carry scissors closed
  21. 21.Which job is a saw for? (a) check a shelf is level (b) drive in a nail (c) cut a wooden plank (d) turn a screw
  22. 22.Which job is a spirit level for? (a) drive in a nail (b) check a shelf is level (c) smooth a rough edge (d) grip and bend wire
  23. 23.True or false: to smooth a rough edge, use sandpaper. (a) True (b) False
  24. 24.True or false: to cut away from your body is not safe. (a) True (b) False
  25. 25.🔍 Which is the odd one out? (a) play near a moving drill (b) run while holding tools (c) let adults use hot glue (d) use a cracked tool
  26. 26.Which job is a protractor for? (a) measure an angle (b) measure a long length (c) smooth a rough edge (d) cut a wooden plank
  27. 27.True or false: to tighten a nut, use pliers. (a) False (b) True
  28. 28.True or false: to make a hole in wood, use a spanner. (a) True (b) False
  29. 29.🔧 Which tool would you use to smooth a rough edge? (a) a protractor (b) a spirit level (c) a hammer (d) sandpaper
  30. 30.🔧 Which tool would you use to grip and bend wire? (a) pliers (b) a spanner (c) a hand drill (d) a protractor
  31. 31.True or false: to drive in a nail, use pliers. (a) True (b) False
  32. 32.True or false: to cut a wooden plank, use a tape measure. (a) True (b) False
  33. 33.True or false: to touch a hot glue tip is safe. (a) True (b) False
  34. 34.Which job is a hand drill for? (a) measure a long length (b) turn a screw (c) make a hole in wood (d) cut a wooden plank
  35. 35.True or false: to check a shelf is level, use a hand drill. (a) False (b) True
  36. 36.🦺 In the workshop, is it safe to carry scissors closed? (a) not safe (b) safe
  37. 37.True or false: to drive in a nail, use a tape measure. (a) True (b) False
  38. 38.🔧 Which tool would you use to turn a screw? (a) a screwdriver (b) a hand drill (c) a protractor (d) a hammer
  39. 39.True or false: to make a hole in wood, use a hand drill. (a) False (b) True
  40. 40.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe

Answer key

  1. safety goggles
  2. touch a hot glue tip
  3. tighten a nut
  4. a spanner
  5. grip and bend wire
  6. True
  7. drive in a nail
  8. clamp wood before sawing
  9. a spirit level
  10. False
  11. False
  12. True
  13. False
  14. a protractor
  15. not safe
  16. an adult
  17. False
  18. True
  19. True
  20. run while holding tools
  21. cut a wooden plank
  22. check a shelf is level
  23. True
  24. False
  25. let adults use hot glue
  26. measure an angle
  27. False
  28. False
  29. sandpaper
  30. pliers
  31. False
  32. False
  33. False
  34. make a hole in wood
  35. False
  36. safe
  37. False
  38. a screwdriver
  39. True
  40. safe

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids