Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 38 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.Which job is a saw for? (a) cut a wooden plank (b) drive in a nail (c) grip and bend wire (d) tighten a nut
2. 2.🔍 Which is the odd one out? (a) cut towards your hand (b) carry scissors closed (c) clamp wood before sawing (d) let adults use hot glue
3. 3.🔧 Which tool would you use to smooth a rough edge? (a) sandpaper (b) a screwdriver (c) a hammer (d) pliers
4. 4.🔧 Which tool would you use to tighten a nut? (a) pliers (b) a spanner (c) a hammer (d) a spirit level
5. 5.🔍 Which is the odd one out? (a) cut towards your hand (b) run while holding tools (c) touch a hot glue tip (d) carry scissors closed
6. 6.True or false: to wear safety goggles is not safe. (a) False (b) True
7. 7.🔍 Which is the odd one out? (a) play near a moving drill (b) run while holding tools (c) cut away from your body (d) touch a hot glue tip
8. 8.Which job is a hammer for? (a) tighten a nut (b) drive in a nail (c) measure an angle (d) smooth a rough edge
9. 9.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) the youngest child (b) any child alone (c) a stranger (d) an adult
10. 10.🔧 Which tool would you use to cut a wooden plank? (a) a hand drill (b) sandpaper (c) a saw (d) a tape measure
11. 11.Which job is a tape measure for? (a) measure a long length (b) grip and bend wire (c) cut a wooden plank (d) make a hole in wood
12. 12.🦺 What protects your eyes when sawing or drilling? (a) safety goggles (b) a cap (c) sunglasses (d) nothing
13. 13.Which job is a spanner for? (a) measure an angle (b) make a hole in wood (c) check a shelf is level (d) tighten a nut
14. 14.🦺 In the workshop, is it safe to carry scissors closed? (a) not safe (b) safe
15. 15.True or false: to smooth a rough edge, use a hammer. (a) True (b) False
16. 16.Which job is a protractor for? (a) measure a long length (b) check a shelf is level (c) measure an angle (d) drive in a nail
17. 17.True or false: to let adults use hot glue is safe. (a) False (b) True
18. 18.True or false: to make a hole in wood, use a hand drill. (a) True (b) False
19. 19.True or false: to measure an angle, use a protractor. (a) False (b) True
20. 20.🔧 Which tool would you use to check a shelf is level? (a) a hand drill (b) a spirit level (c) a spanner (d) a protractor
21. 21.🔍 Which is the odd one out? (a) use a cracked tool (b) leave tools on the floor (c) touch a hot glue tip (d) tie back long hair
22. 22.True or false: to cut a wooden plank, use a screwdriver. (a) False (b) True
23. 23.True or false: to drive in a nail, use a screwdriver. (a) True (b) False
24. 24.🔧 Which tool would you use to drive in a nail? (a) a protractor (b) a hammer (c) sandpaper (d) a hand drill
25. 25.🔧 Which tool would you use to measure a long length? (a) a hammer (b) a tape measure (c) a saw (d) a spanner
26. 26.True or false: to tie back long hair is not safe. (a) False (b) True
27. 27.🔍 Which is the odd one out? (a) let adults use hot glue (b) clamp wood before sawing (c) play near a moving drill (d) cut away from your body
28. 28.🔧 Which tool would you use to turn a screw? (a) a hand drill (b) a hammer (c) a screwdriver (d) a tape measure
29. 29.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe
30. 30.🔧 Which tool would you use to make a hole in wood? (a) a saw (b) a hammer (c) a hand drill (d) a spirit level
31. 31.🔍 Which is the odd one out? (a) cut away from your body (b) leave tools on the floor (c) carry scissors closed (d) tie back long hair
32. 32.Which job is a hand drill for? (a) cut a wooden plank (b) make a hole in wood (c) grip and bend wire (d) smooth a rough edge
33. 33.True or false: to cut away from your body is not safe. (a) False (b) True
34. 34.🔍 Which is the odd one out? (a) leave tools on the floor (b) run while holding tools (c) use a cracked tool (d) put tools back after use
35. 35.🔍 Which is the odd one out? (a) touch a hot glue tip (b) leave tools on the floor (c) cut towards your hand (d) clamp wood before sawing
36. 36.🦺 In the workshop, is it safe to tie back long hair? (a) safe (b) not safe
37. 37.True or false: to let adults use hot glue is not safe. (a) True (b) False
38. 38.🔧 Which tool would you use to measure an angle? (a) sandpaper (b) a screwdriver (c) pliers (d) a protractor
39. 39.🦺 How should you carry scissors? (a) while running (b) points up, open (c) by the blades (d) points down, closed
40. 40.True or false: to cut away from your body is safe. (a) False (b) True

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids