Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 4 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🦺 What protects your eyes when sawing or drilling? (a) sunglasses (b) safety goggles (c) a cap (d) nothing
2. 2.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe
3. 3.🦺 In the workshop, is it safe to clamp wood before sawing? (a) not safe (b) safe
4. 4.Which job is sandpaper for? (a) check a shelf is level (b) turn a screw (c) make a hole in wood (d) smooth a rough edge
5. 5.🦺 In the workshop, is it safe to run while holding tools? (a) safe (b) not safe
6. 6.🔍 Which is the odd one out? (a) put tools back after use (b) touch a hot glue tip (c) carry scissors closed (d) cut away from your body
7. 7.🔧 Which tool would you use to check a shelf is level? (a) a spanner (b) a tape measure (c) a hand drill (d) a spirit level
8. 8.🦺 In the workshop, is it safe to cut away from your body? (a) not safe (b) safe
9. 9.🔧 Which tool would you use to grip and bend wire? (a) pliers (b) a protractor (c) a hammer (d) sandpaper
10. 10.True or false: to smooth a rough edge, use sandpaper. (a) True (b) False
11. 11.Which job is a tape measure for? (a) measure an angle (b) smooth a rough edge (c) turn a screw (d) measure a long length
12. 12.Which job is a screwdriver for? (a) measure a long length (b) tighten a nut (c) turn a screw (d) check a shelf is level
13. 13.🦺 In the workshop, is it safe to let adults use hot glue? (a) safe (b) not safe
14. 14.🔧 Which tool would you use to measure an angle? (a) a protractor (b) a hand drill (c) a screwdriver (d) a hammer
15. 15.🔧 Which tool would you use to measure a long length? (a) a spanner (b) a saw (c) a protractor (d) a tape measure
16. 16.🔍 Which is the odd one out? (a) leave tools on the floor (b) cut away from your body (c) use a cracked tool (d) run while holding tools
17. 17.Which job is a spanner for? (a) check a shelf is level (b) measure a long length (c) grip and bend wire (d) tighten a nut
18. 18.True or false: to play near a moving drill is not safe. (a) False (b) True
19. 19.🔧 Which tool would you use to drive in a nail? (a) pliers (b) a spanner (c) a protractor (d) a hammer
20. 20.🔍 Which is the odd one out? (a) let adults use hot glue (b) cut away from your body (c) run while holding tools (d) wear safety goggles
21. 21.🔍 Which is the odd one out? (a) wear safety goggles (b) put tools back after use (c) cut towards your hand (d) carry scissors closed
22. 22.True or false: to wear safety goggles is safe. (a) True (b) False
23. 23.🦺 How should you carry scissors? (a) by the blades (b) while running (c) points down, closed (d) points up, open
24. 24.Which job is pliers for? (a) grip and bend wire (b) tighten a nut (c) make a hole in wood (d) smooth a rough edge
25. 25.True or false: to let adults use hot glue is not safe. (a) True (b) False
26. 26.True or false: to cut a wooden plank, use a saw. (a) True (b) False
27. 27.True or false: to smooth a rough edge, use a spanner. (a) False (b) True
28. 28.True or false: to measure a long length, use a tape measure. (a) False (b) True
29. 29.Which job is a saw for? (a) drive in a nail (b) cut a wooden plank (c) measure a long length (d) measure an angle
30. 30.True or false: to turn a screw, use a screwdriver. (a) True (b) False
31. 31.True or false: to clamp wood before sawing is not safe. (a) False (b) True
32. 32.🔧 Which tool would you use to smooth a rough edge? (a) a hand drill (b) a protractor (c) sandpaper (d) a saw
33. 33.True or false: to measure an angle, use a protractor. (a) False (b) True
34. 34.🔍 Which is the odd one out? (a) touch a hot glue tip (b) run while holding tools (c) clamp wood before sawing (d) play near a moving drill
35. 35.🦺 In the workshop, is it safe to play near a moving drill? (a) safe (b) not safe
36. 36.🔧 Which tool would you use to cut a wooden plank? (a) a saw (b) sandpaper (c) a tape measure (d) a spanner
37. 37.True or false: to carry scissors closed is safe. (a) True (b) False
38. 38.True or false: to check a shelf is level, use a hand drill. (a) False (b) True
39. 39.Which job is a spirit level for? (a) cut a wooden plank (b) check a shelf is level (c) measure a long length (d) measure an angle
40. 40.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) a stranger (b) any child alone (c) an adult (d) the youngest child

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids