Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 63 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🦺 What protects your eyes when sawing or drilling? (a) safety goggles (b) nothing (c) a cap (d) sunglasses
2. 2.🦺 In the workshop, is it safe to use a cracked tool? (a) not safe (b) safe
3. 3.🔧 Which tool would you use to tighten a nut? (a) pliers (b) a spirit level (c) a spanner (d) a saw
4. 4.Which job is a spanner for? (a) drive in a nail (b) measure an angle (c) turn a screw (d) tighten a nut
5. 5.True or false: to check a shelf is level, use a spirit level. (a) False (b) True
6. 6.True or false: to tie back long hair is safe. (a) True (b) False
7. 7.🦺 In the workshop, is it safe to touch a hot glue tip? (a) safe (b) not safe
8. 8.🔍 Which is the odd one out? (a) leave tools on the floor (b) cut towards your hand (c) carry scissors closed (d) use a cracked tool
9. 9.🔧 Which tool would you use to drive in a nail? (a) a protractor (b) a hammer (c) a spanner (d) pliers
10. 10.True or false: to cut a wooden plank, use sandpaper. (a) False (b) True
11. 11.🔍 Which is the odd one out? (a) touch a hot glue tip (b) clamp wood before sawing (c) run while holding tools (d) use a cracked tool
12. 12.🔍 Which is the odd one out? (a) tie back long hair (b) let adults use hot glue (c) wear safety goggles (d) play near a moving drill
13. 13.True or false: to make a hole in wood, use pliers. (a) True (b) False
14. 14.🦺 In the workshop, is it safe to play near a moving drill? (a) not safe (b) safe
15. 15.🦺 How should you carry scissors? (a) by the blades (b) while running (c) points down, closed (d) points up, open
16. 16.True or false: to make a hole in wood, use a spirit level. (a) True (b) False
17. 17.Which job is a spirit level for? (a) measure an angle (b) smooth a rough edge (c) check a shelf is level (d) make a hole in wood
18. 18.True or false: to clamp wood before sawing is not safe. (a) True (b) False
19. 19.🔧 Which tool would you use to make a hole in wood? (a) a hand drill (b) a spanner (c) a saw (d) a hammer
20. 20.True or false: to drive in a nail, use a saw. (a) True (b) False
21. 21.Which job is a tape measure for? (a) measure an angle (b) measure a long length (c) smooth a rough edge (d) grip and bend wire
22. 22.🔧 Which tool would you use to smooth a rough edge? (a) a protractor (b) a spanner (c) sandpaper (d) pliers
23. 23.Which job is pliers for? (a) smooth a rough edge (b) turn a screw (c) grip and bend wire (d) measure an angle
24. 24.🔍 Which is the odd one out? (a) let adults use hot glue (b) run while holding tools (c) carry scissors closed (d) cut away from your body
25. 25.True or false: to turn a screw, use a screwdriver. (a) False (b) True
26. 26.True or false: to cut towards your hand is not safe. (a) True (b) False
27. 27.True or false: to measure an angle, use a screwdriver. (a) True (b) False
28. 28.🔧 Which tool would you use to cut a wooden plank? (a) a hand drill (b) a saw (c) a hammer (d) sandpaper
29. 29.🔍 Which is the odd one out? (a) leave tools on the floor (b) put tools back after use (c) tie back long hair (d) clamp wood before sawing
30. 30.True or false: to play near a moving drill is safe. (a) False (b) True
31. 31.🔧 Which tool would you use to turn a screw? (a) a hand drill (b) a hammer (c) a screwdriver (d) pliers
32. 32.🔍 Which is the odd one out? (a) run while holding tools (b) let adults use hot glue (c) touch a hot glue tip (d) cut towards your hand
33. 33.🦺 In the workshop, is it safe to cut away from your body? (a) safe (b) not safe
34. 34.🔍 Which is the odd one out? (a) cut towards your hand (b) wear safety goggles (c) carry scissors closed (d) tie back long hair
35. 35.🔍 Which is the odd one out? (a) tie back long hair (b) touch a hot glue tip (c) use a cracked tool (d) play near a moving drill
36. 36.True or false: to grip and bend wire, use a hammer. (a) False (b) True
37. 37.🔍 Which is the odd one out? (a) let adults use hot glue (b) carry scissors closed (c) touch a hot glue tip (d) tie back long hair
38. 38.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) an adult (b) a stranger (c) the youngest child (d) any child alone
39. 39.Which job is a protractor for? (a) measure a long length (b) tighten a nut (c) drive in a nail (d) measure an angle
40. 40.🦺 In the workshop, is it safe to tie back long hair? (a) not safe (b) safe

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids