Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 68 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🔧 Which tool would you use to check a shelf is level? (a) a hammer (b) a spirit level (c) a tape measure (d) a saw
2. 2.🔧 Which tool would you use to make a hole in wood? (a) a tape measure (b) a saw (c) sandpaper (d) a hand drill
3. 3.🦺 In the workshop, is it safe to let adults use hot glue? (a) not safe (b) safe
4. 4.🔍 Which is the odd one out? (a) run while holding tools (b) leave tools on the floor (c) touch a hot glue tip (d) wear safety goggles
5. 5.🦺 What protects your eyes when sawing or drilling? (a) safety goggles (b) nothing (c) a cap (d) sunglasses
6. 6.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) a stranger (b) the youngest child (c) any child alone (d) an adult
7. 7.🔧 Which tool would you use to measure an angle? (a) a hand drill (b) a protractor (c) a tape measure (d) a spirit level
8. 8.🦺 In the workshop, is it safe to put tools back after use? (a) not safe (b) safe
9. 9.🔍 Which is the odd one out? (a) use a cracked tool (b) let adults use hot glue (c) carry scissors closed (d) wear safety goggles
10. 10.True or false: to put tools back after use is safe. (a) True (b) False
11. 11.True or false: to put tools back after use is not safe. (a) True (b) False
12. 12.True or false: to measure a long length, use a spirit level. (a) True (b) False
13. 13.🔧 Which tool would you use to smooth a rough edge? (a) sandpaper (b) a screwdriver (c) a protractor (d) a spanner
14. 14.True or false: to measure a long length, use a saw. (a) False (b) True
15. 15.🦺 In the workshop, is it safe to use a cracked tool? (a) not safe (b) safe
16. 16.True or false: to cut a wooden plank, use a saw. (a) False (b) True
17. 17.True or false: to wear safety goggles is not safe. (a) False (b) True
18. 18.True or false: to measure a long length, use pliers. (a) True (b) False
19. 19.🔍 Which is the odd one out? (a) wear safety goggles (b) tie back long hair (c) cut towards your hand (d) let adults use hot glue
20. 20.Which job is a spirit level for? (a) drive in a nail (b) tighten a nut (c) check a shelf is level (d) cut a wooden plank
21. 21.Which job is a hand drill for? (a) grip and bend wire (b) make a hole in wood (c) turn a screw (d) smooth a rough edge
22. 22.Which job is pliers for? (a) grip and bend wire (b) check a shelf is level (c) make a hole in wood (d) measure a long length
23. 23.🔍 Which is the odd one out? (a) tie back long hair (b) run while holding tools (c) leave tools on the floor (d) touch a hot glue tip
24. 24.Which job is sandpaper for? (a) smooth a rough edge (b) measure an angle (c) turn a screw (d) drive in a nail
25. 25.True or false: to drive in a nail, use a tape measure. (a) True (b) False
26. 26.True or false: to cut towards your hand is safe. (a) True (b) False
27. 27.True or false: to play near a moving drill is not safe. (a) False (b) True
28. 28.True or false: to check a shelf is level, use a spirit level. (a) True (b) False
29. 29.Which job is a protractor for? (a) measure a long length (b) measure an angle (c) check a shelf is level (d) drive in a nail
30. 30.True or false: to tighten a nut, use a spanner. (a) False (b) True
31. 31.🦺 In the workshop, is it safe to touch a hot glue tip? (a) not safe (b) safe
32. 32.🦺 In the workshop, is it safe to cut away from your body? (a) not safe (b) safe
33. 33.🦺 In the workshop, is it safe to cut towards your hand? (a) safe (b) not safe
34. 34.True or false: to turn a screw, use a screwdriver. (a) False (b) True
35. 35.🦺 In the workshop, is it safe to play near a moving drill? (a) not safe (b) safe
36. 36.🔧 Which tool would you use to cut a wooden plank? (a) a saw (b) a tape measure (c) a hand drill (d) a protractor
37. 37.True or false: to tighten a nut, use pliers. (a) False (b) True
38. 38.Which job is a spanner for? (a) check a shelf is level (b) cut a wooden plank (c) tighten a nut (d) grip and bend wire
39. 39.Which job is a screwdriver for? (a) turn a screw (b) measure a long length (c) drive in a nail (d) cut a wooden plank
40. 40.True or false: to leave tools on the floor is not safe. (a) False (b) True

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids