Pulleys and Wheel and Axle Worksheet

Engineering lesson 14: Pulleys and the wheel and axle · Set 375 · 40 questions

Engineer's tip (Count the ropes): Fixed pulley: changes direction, effort = load. Pulley system: effort = load ÷ supporting rope sections; rope pulled = lift height × that number. Wheel and axle: MA = wheel radius ÷ axle radius; effort = load ÷ MA.

1. 1.🪝 Fixed or movable pulley: which one is on a flagpole top? (a) a movable pulley (b) a fixed pulley
2. 2.True or false: a movable pulley only changes direction. (a) True (b) False
3. 3.🪝 A bucket weighing 80 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
4. 4.🪝 A bucket weighing 300 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
5. 5.🪝 A pulley system has 1 rope section holding up the load. To lift the load by 10 m, how many metres of rope must you pull?
6. 6.True or false: a movable pulley needs effort = load. (a) True (b) False
7. 7.True or false: a fixed pulley stays in one place. (a) False (b) True
8. 8.🪝 A bucket weighing 190 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
9. 9.🪝 A winch has a wheel of radius 21 cm and an axle of radius 3 cm. What effort on the wheel lifts a 910 N bucket on the axle, in newtons? (ideal)
10. 10.🪝 More rope sections holding a load means … (a) the load floats (b) no change (c) more effort needed (d) less effort needed
11. 11.True or false: a fixed pulley needs effort = load. (a) False (b) True
12. 12.🪝 A pulley system has 1 rope section holding up the load. To lift the load by 6 m, how many metres of rope must you pull?
13. 13.🪝 A pulley system has 2 rope sections holding up the load. To lift the load by 10 m, how many metres of rope must you pull?
14. 14.True or false: a fixed pulley halves the effort. (a) False (b) True
15. 15.🪝 A load of 870 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
16. 16.🪝 What does a single fixed pulley change? (a) the direction of pull (b) gravity (c) the size of the load (d) the colour of rope
17. 17.🪝 A load of 120 N hangs from a pulley system in which 2 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
18. 18.🪝 A load of 560 N hangs from a pulley system in which 4 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
19. 19.True or false: a movable pulley is on a flagpole top. (a) False (b) True
20. 20.True or false: a fixed pulley only changes direction. (a) False (b) True
21. 21.🪝 A load of 720 N hangs from a pulley system in which 4 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
22. 22.🪝 A pulley system has 3 rope sections holding up the load. To lift the load by 2 m, how many metres of rope must you pull?
23. 23.🪝 A winch has a wheel of radius 20 cm and an axle of radius 4 cm. What effort on the wheel lifts a 450 N bucket on the axle, in newtons? (ideal)
24. 24.True or false: a movable pulley hangs on the rope loop. (a) False (b) True
25. 25.🪝 A winch has a wheel of radius 5 cm and an axle of radius 1 cm. What effort on the wheel lifts a 700 N bucket on the axle, in newtons? (ideal)
26. 26.🪝 A bucket weighing 360 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
27. 27.🪝 A well winch has a handle (wheel) of radius 20 cm turning an axle of radius 5 cm. What is its mechanical advantage (MA)?
28. 28.🪝 A well winch has a handle (wheel) of radius 8 cm turning an axle of radius 4 cm. What is its mechanical advantage (MA)?
29. 29.🪝 A well winch has a handle (wheel) of radius 6 cm turning an axle of radius 3 cm. What is its mechanical advantage (MA)?
30. 30.🪝 A wheel and axle is a big wheel fixed to … (a) a flat ramp (b) a sharp wedge (c) a loose rope (d) a smaller rod (axle)
31. 31.🪝 A bucket weighing 100 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
32. 32.🪝 Fixed or movable pulley: which one stays in one place? (a) a movable pulley (b) a fixed pulley
33. 33.🪝 A load of 560 N hangs from a pulley system in which 2 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
34. 34.🪝 A winch has a wheel of radius 10 cm and an axle of radius 2 cm. What effort on the wheel lifts a 500 N bucket on the axle, in newtons? (ideal)
35. 35.🪝 A well winch has a handle (wheel) of radius 4 cm turning an axle of radius 2 cm. What is its mechanical advantage (MA)?
36. 36.🪝 Fixed or movable pulley: which one hangs on the rope loop? (a) a fixed pulley (b) a movable pulley
37. 37.🪝 Fixed or movable pulley: which one needs effort = load? (a) a movable pulley (b) a fixed pulley
38. 38.🪝 A load of 240 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
39. 39.🪝 A well winch has a handle (wheel) of radius 6 cm turning an axle of radius 2 cm. What is its mechanical advantage (MA)?
40. 40.🪝 A winch has a wheel of radius 35 cm and an axle of radius 5 cm. What effort on the wheel lifts an 840 N bucket on the axle, in newtons? (ideal)

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids