Pulleys and Wheel and Axle Worksheet

Engineering lesson 14: Pulleys and the wheel and axle · Set 805 · 40 questions

Engineer's tip (Count the ropes): Fixed pulley: changes direction, effort = load. Pulley system: effort = load ÷ supporting rope sections; rope pulled = lift height × that number. Wheel and axle: MA = wheel radius ÷ axle radius; effort = load ÷ MA.

1. 1.🪝 A pulley system has 1 rope section holding up the load. To lift the load by 10 m, how many metres of rope must you pull?
2. 2.True or false: a movable pulley only changes direction. (a) True (b) False
3. 3.True or false: a fixed pulley needs effort = load. (a) False (b) True
4. 4.🪝 A bucket weighing 90 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
5. 5.🪝 What does a single fixed pulley change? (a) the colour of rope (b) the size of the load (c) gravity (d) the direction of pull
6. 6.🪝 A winch has a wheel of radius 6 cm and an axle of radius 1 cm. What effort on the wheel lifts a 900 N bucket on the axle, in newtons? (ideal)
7. 7.🪝 Fixed or movable pulley: which one rises with the load? (a) a fixed pulley (b) a movable pulley
8. 8.🪝 Fixed or movable pulley: which one only changes direction? (a) a movable pulley (b) a fixed pulley
9. 9.🪝 Fixed or movable pulley: which one is on a flagpole top? (a) a fixed pulley (b) a movable pulley
10. 10.🪝 A load of 320 N hangs from a pulley system in which 4 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
11. 11.🪝 A well winch has a handle (wheel) of radius 10 cm turning an axle of radius 2 cm. What is its mechanical advantage (MA)?
12. 12.True or false: a movable pulley hangs on the rope loop. (a) True (b) False
13. 13.🪝 A wheel and axle is a big wheel fixed to … (a) a flat ramp (b) a loose rope (c) a smaller rod (axle) (d) a sharp wedge
14. 14.🪝 A pulley system lifts a 300 N load with an effort of 100 N. What is its mechanical advantage (MA)?
15. 15.🪝 A well winch has a handle (wheel) of radius 28 cm turning an axle of radius 4 cm. What is its mechanical advantage (MA)?
16. 16.True or false: a movable pulley stays in one place. (a) True (b) False
17. 17.🪝 More rope sections holding a load means … (a) the load floats (b) less effort needed (c) no change (d) more effort needed
18. 18.🪝 A well winch has a handle (wheel) of radius 6 cm turning an axle of radius 3 cm. What is its mechanical advantage (MA)?
19. 19.True or false: a fixed pulley hangs on the rope loop. (a) True (b) False
20. 20.🪝 A load of 180 N hangs from a pulley system in which 2 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
21. 21.🪝 A pulley system has 4 rope sections holding up the load. To lift the load by 4 m, how many metres of rope must you pull?
22. 22.🪝 A winch has a wheel of radius 20 cm and an axle of radius 4 cm. What effort on the wheel lifts a 650 N bucket on the axle, in newtons? (ideal)
23. 23.🪝 Fixed or movable pulley: which one halves the effort? (a) a fixed pulley (b) a movable pulley
24. 24.True or false: a fixed pulley makes you pull 2× rope. (a) True (b) False
25. 25.🪝 A pulley system has 4 rope sections holding up the load. To lift the load by 8 m, how many metres of rope must you pull?
26. 26.🪝 Fixed or movable pulley: which one hangs on the rope loop? (a) a fixed pulley (b) a movable pulley
27. 27.True or false: a fixed pulley halves the effort. (a) True (b) False
28. 28.🪝 A well winch has a handle (wheel) of radius 24 cm turning an axle of radius 4 cm. What is its mechanical advantage (MA)?
29. 29.🪝 A pulley system has 2 rope sections holding up the load. To lift the load by 4 m, how many metres of rope must you pull?
30. 30.🪝 A winch has a wheel of radius 16 cm and an axle of radius 2 cm. What effort on the wheel lifts a 160 N bucket on the axle, in newtons? (ideal)
31. 31.🪝 A load of 870 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
32. 32.🪝 A bucket weighing 290 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
33. 33.🪝 A bucket weighing 130 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
34. 34.🪝 A load of 270 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
35. 35.🪝 A well winch has a handle (wheel) of radius 5 cm turning an axle of radius 1 cm. What is its mechanical advantage (MA)?
36. 36.True or false: a movable pulley is on a flagpole top. (a) True (b) False
37. 37.🪝 A load of 220 N hangs from a pulley system in which 2 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
38. 38.🪝 Fixed or movable pulley: which one needs effort = load? (a) a movable pulley (b) a fixed pulley
39. 39.🪝 A load of 180 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
40. 40.🪝 A load of 520 N hangs from a pulley system in which 2 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids