Pulleys and Wheel and Axle Worksheet

Engineering lesson 14: Pulleys and the wheel and axle · Set 932 · 40 questions

Engineer's tip (Count the ropes): Fixed pulley: changes direction, effort = load. Pulley system: effort = load ÷ supporting rope sections; rope pulled = lift height × that number. Wheel and axle: MA = wheel radius ÷ axle radius; effort = load ÷ MA.

1. 1.🪝 A well winch has a handle (wheel) of radius 20 cm turning an axle of radius 4 cm. What is its mechanical advantage (MA)?
2. 2.🪝 More rope sections holding a load means … (a) no change (b) the load floats (c) less effort needed (d) more effort needed
3. 3.True or false: a movable pulley stays in one place. (a) True (b) False
4. 4.🪝 A load of 210 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
5. 5.🪝 Fixed or movable pulley: which one hangs on the rope loop? (a) a fixed pulley (b) a movable pulley
6. 6.🪝 A pulley system has 3 rope sections holding up the load. To lift the load by 1 m, how many metres of rope must you pull?
7. 7.🪝 A wheel and axle is a big wheel fixed to … (a) a loose rope (b) a smaller rod (axle) (c) a sharp wedge (d) a flat ramp
8. 8.🪝 A pulley system has 1 rope section holding up the load. To lift the load by 6 m, how many metres of rope must you pull?
9. 9.🪝 A pulley system lifts an 880 N load with an effort of 220 N. What is its mechanical advantage (MA)?
10. 10.🪝 Fixed or movable pulley: which one needs effort = load? (a) a fixed pulley (b) a movable pulley
11. 11.🪝 A bucket weighing 270 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
12. 12.🪝 What does a single fixed pulley change? (a) gravity (b) the direction of pull (c) the size of the load (d) the colour of rope
13. 13.🪝 Fixed or movable pulley: which one only changes direction? (a) a movable pulley (b) a fixed pulley
14. 14.🪝 A load of 510 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
15. 15.🪝 A winch has a wheel of radius 24 cm and an axle of radius 4 cm. What effort on the wheel lifts a 1140 N bucket on the axle, in newtons? (ideal)
16. 16.🪝 Fixed or movable pulley: which one is on a flagpole top? (a) a fixed pulley (b) a movable pulley
17. 17.🪝 A pulley system lifts a 1080 N load with an effort of 270 N. What is its mechanical advantage (MA)?
18. 18.🪝 A bucket weighing 90 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
19. 19.🪝 A winch has a wheel of radius 4 cm and an axle of radius 2 cm. What effort on the wheel lifts a 260 N bucket on the axle, in newtons? (ideal)
20. 20.🪝 A load of 390 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
21. 21.🪝 A well winch has a handle (wheel) of radius 8 cm turning an axle of radius 4 cm. What is its mechanical advantage (MA)?
22. 22.🪝 Fixed or movable pulley: which one stays in one place? (a) a movable pulley (b) a fixed pulley
23. 23.🪝 Fixed or movable pulley: which one halves the effort? (a) a movable pulley (b) a fixed pulley
24. 24.🪝 A winch has a wheel of radius 35 cm and an axle of radius 5 cm. What effort on the wheel lifts a 210 N bucket on the axle, in newtons? (ideal)
25. 25.True or false: a fixed pulley hangs on the rope loop. (a) True (b) False
26. 26.🪝 A bucket weighing 380 N is lifted with a single fixed pulley at the top of a well. What effort is needed, in newtons? (ideal pulley, no friction)
27. 27.🪝 A load of 140 N hangs from a pulley system in which 2 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
28. 28.🪝 A winch has a wheel of radius 30 cm and an axle of radius 5 cm. What effort on the wheel lifts a 1200 N bucket on the axle, in newtons? (ideal)
29. 29.🪝 A pulley system has 4 rope sections holding up the load. To lift the load by 9 m, how many metres of rope must you pull?
30. 30.🪝 Fixed or movable pulley: which one makes you pull 2× rope? (a) a fixed pulley (b) a movable pulley
31. 31.🪝 A load of 810 N hangs from a pulley system in which 3 rope sections hold up the load. What effort is needed, in newtons? (ideal pulleys)
32. 32.🪝 A pulley system has 4 rope sections holding up the load. To lift the load by 5 m, how many metres of rope must you pull?
33. 33.True or false: a movable pulley needs effort = load. (a) True (b) False
34. 34.🪝 A well winch has a handle (wheel) of radius 9 cm turning an axle of radius 3 cm. What is its mechanical advantage (MA)?
35. 35.🪝 A winch has a wheel of radius 20 cm and an axle of radius 5 cm. What effort on the wheel lifts a 440 N bucket on the axle, in newtons? (ideal)
36. 36.🪝 A pulley system has 1 rope section holding up the load. To lift the load by 7 m, how many metres of rope must you pull?
37. 37.🪝 A pulley system has 3 rope sections holding up the load. To lift the load by 3 m, how many metres of rope must you pull?
38. 38.🪝 A well winch has a handle (wheel) of radius 6 cm turning an axle of radius 2 cm. What is its mechanical advantage (MA)?
39. 39.True or false: a fixed pulley rises with the load. (a) False (b) True
40. 40.True or false: a fixed pulley halves the effort. (a) False (b) True

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids