← Debugging robot programs lesson New set →

Robotics Worksheet: Debugging Robot Programs

Robotics lesson 26: Debugging robot programs · Set 25 · 40 questions
TalentJR

Robot tip (Compare and fix one thing): Run it, spot what went wrong, find the buggy line, fix one thing, test again. Wrong side → a turn is the wrong way. Too far or too short → a forward number is wrong. A shape that does not close → the turn should be 360 ÷ sides; a gap → the repeat number should equal the sides.

NameDateTime takenScore ___ / 40
  1. 1.🐞 A mistake in a program is called a … (a) sensor (b) bug (c) loop (d) gear
  2. 2.🔢 To debug a robot program, what comes right after “spot what went wrong”? (a) run the program (b) find the buggy line (c) test it again (d) fix one thing
  3. 3.🐞 This program should draw a regular octagon (8 equal sides), but the shape does not close:
    repeat 8 { forward 10 cm; turn right 72° }
    What should 72 be changed to?
  4. 4.🔢 To debug a robot program, which comes first: “fix one thing” or “spot what went wrong”? (a) fix one thing (b) spot what went wrong
  5. 5.🐞 This program should draw a regular pentagon (5 equal sides), but the shape does not close:
    repeat 5 { forward 10 cm; turn right 120° }
    What should 120 be changed to?
  6. 6.🐞 A robot starts at (4, 0) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (6, 2). Its program:
    1. forward 3
    2. turn right
    3. forward 2
    It stops at (6, 3) instead. Which line has the bug?     (a) line 2 (b) line 1 (c) line 3
  7. 7.🔢 To debug a robot program, which comes first: “run the program” or “find the buggy line”? (a) run the program (b) find the buggy line
  8. 8.🐞 This program should draw a regular octagon (8 equal sides), but the shape does not close:
    repeat 8 { forward 10 cm; turn right 90° }
    What should 90 be changed to?
  9. 9.🐞 A robot starts at (4, 0) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (2, 3). Its program:
    1. forward 2
    2. turn left
    3. forward 2
    It stops at (2, 2) instead. Which line has the bug?     (a) line 3 (b) line 2 (c) line 1
  10. 10.🐞 This program should draw a regular square (4 equal sides), but the shape does not close:
    repeat 4 { forward 10 cm; turn right 120° }
    What should 120 be changed to?
  11. 11.🔢 To debug a robot program, what comes right after “find the buggy line”? (a) spot what went wrong (b) fix one thing (c) test it again (d) run the program
  12. 12.🔢 To debug a robot program, what comes right after “fix one thing”? (a) spot what went wrong (b) run the program (c) test it again (d) find the buggy line
  13. 13.🐞 This program should draw a regular square (4 equal sides), but it leaves a gap:
    repeat 3 { forward 10 cm; turn right 90° }
    What should the number 3 after “repeat” be?
  14. 14.🐞 This program should draw a regular hexagon (6 equal sides), but it leaves a gap:
    repeat 4 { forward 10 cm; turn right 60° }
    What should the number 4 after “repeat” be?
  15. 15.🐞 Why change only one thing at a time when debugging? (a) to make it slower (b) to confuse others (c) to save paper (d) to see what fixed it
  16. 16.🔢 To debug a robot program, which is the FIRST step? (a) fix one thing (b) find the buggy line (c) run the program (d) test it again
  17. 17.🔢 To debug a robot program, which comes first: “find the buggy line” or “test it again”? (a) find the buggy line (b) test it again
  18. 18.🔢 To debug a robot program, which comes first: “spot what went wrong” or “fix one thing”? (a) spot what went wrong (b) fix one thing
  19. 19.🔢 To debug a robot program, what comes right after “run the program”? (a) find the buggy line (b) test it again (c) fix one thing (d) spot what went wrong
  20. 20.🐞 This program should draw a regular triangle (3 equal sides), but the shape does not close:
    repeat 3 { forward 10 cm; turn right 45° }
    What should 45 be changed to?
  21. 21.🐞 A robot turns the wrong way at every corner. What is the likely bug? (a) wheels are too round (b) the floor is clean (c) left and right mixed up (d) battery is too new
  22. 22.🐞 A robot starts at (5, 1) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (2, 3). Its program:
    1. forward 2
    2. turn left
    3. forward 2
    It stops at (3, 3) instead. Which line has the bug?     (a) line 2 (b) line 3 (c) line 1
  23. 23.🐞 A robot starts at (5, 0) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (3, 3). Its program:
    1. forward 4
    2. turn left
    3. forward 2
    It stops at (3, 4) instead. Which line has the bug?     (a) line 2 (b) line 3 (c) line 1
  24. 24.🐞 A robot starts at (4, 1) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (3, 6). Its program:
    1. forward 6
    2. turn left
    3. forward 1
    It stops at (3, 7) instead. Which line has the bug?     (a) line 1 (b) line 3 (c) line 2
  25. 25.🐞 A robot starts at (5, 1) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (7, 4). Its program:
    1. forward 3
    2. turn right
    3. forward 1
    It stops at (6, 4) instead. Which line has the bug?     (a) line 2 (b) line 1 (c) line 3
  26. 26.🐞 A robot starts at (5, 2) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (7, 6). Its program:
    1. forward 4
    2. turn left
    3. forward 2
    It stops at (3, 6) instead. Which line has the bug?     (a) line 1 (b) line 3 (c) line 2
  27. 27.🔢 To debug a robot program, which comes first: “spot what went wrong” or “find the buggy line”? (a) spot what went wrong (b) find the buggy line
  28. 28.🐞 This program should draw a regular pentagon (5 equal sides), but it leaves a gap:
    repeat 2 { forward 10 cm; turn right 72° }
    What should the number 2 after “repeat” be?
  29. 29.🐞 This program should draw a regular hexagon (6 equal sides), but the shape does not close:
    repeat 6 { forward 10 cm; turn right 72° }
    What should 72 be changed to?
  30. 30.🐞 This program should draw a regular hexagon (6 equal sides), but the shape does not close:
    repeat 6 { forward 10 cm; turn right 90° }
    What should 90 be changed to?
  31. 31.🐞 This program should draw a regular square (4 equal sides), but it leaves a gap:
    repeat 2 { forward 10 cm; turn right 90° }
    What should the number 2 after “repeat” be?
  32. 32.🐞 A robot starts at (5, 0) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (4, 2). Its program:
    1. forward 3
    2. turn left
    3. forward 1
    It stops at (4, 3) instead. Which line has the bug?     (a) line 1 (b) line 3 (c) line 2
  33. 33.🔢 To debug a robot program, which is the LAST step? (a) find the buggy line (b) test it again (c) run the program (d) fix one thing
  34. 34.🐞 This program should draw a regular hexagon (6 equal sides), but it leaves a gap:
    repeat 3 { forward 10 cm; turn right 60° }
    What should the number 3 after “repeat” be?
  35. 35.🐞 A robot starts at (5, 2) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (3, 5). Its program:
    1. forward 4
    2. turn left
    3. forward 2
    It stops at (3, 6) instead. Which line has the bug?     (a) line 3 (b) line 1 (c) line 2
  36. 36.🐞 A robot starts at (4, 0) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (1, 4). Its program:
    1. forward 3
    2. turn left
    3. forward 3
    It stops at (1, 3) instead. Which line has the bug?     (a) line 2 (b) line 1 (c) line 3
  37. 37.🐞 This program should draw a regular pentagon (5 equal sides), but it leaves a gap:
    repeat 4 { forward 10 cm; turn right 72° }
    What should the number 4 after “repeat” be?
  38. 38.🐞 A robot starts at (5, 2) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (6, 4). Its program:
    1. forward 2
    2. turn right
    3. forward 2
    It stops at (7, 4) instead. Which line has the bug?     (a) line 2 (b) line 1 (c) line 3
  39. 39.🐞 This program should draw a regular pentagon (5 equal sides), but the shape does not close:
    repeat 5 { forward 10 cm; turn right 45° }
    What should 45 be changed to?
  40. 40.🐞 A robot starts at (4, 2) facing north (the second number counts squares up, the first counts squares across to the east). It should stop on the star at (6, 4). Its program:
    1. forward 3
    2. turn right
    3. forward 2
    It stops at (6, 5) instead. Which line has the bug?     (a) line 2 (b) line 1 (c) line 3

Answer key

  1. bug
  2. find the buggy line
  3. 45
  4. spot what went wrong
  5. 72
  6. line 1
  7. run the program
  8. 45
  9. line 1
  10. 90
  11. fix one thing
  12. test it again
  13. 4
  14. 6
  15. to see what fixed it
  16. run the program
  17. find the buggy line
  18. spot what went wrong
  19. spot what went wrong
  20. 120
  21. left and right mixed up
  22. line 3
  23. line 1
  24. line 1
  25. line 3
  26. line 2
  27. spot what went wrong
  28. 5
  29. 60
  30. 60
  31. 4
  32. line 1
  33. test it again
  34. 6
  35. line 1
  36. line 1
  37. 5
  38. line 3
  39. 72
  40. line 1

Free robotics lessons, practice and worksheets at talentjr.in/robotics-for-kids