Electronics Worksheet: Electricity Basics Test
Remember (Find the topic, use the idea): Find the topic: energy, safety, conductor, closed loop, switches, cells, symbols, series or parallel. Use that lesson’s idea — complete loop, all ON for series, cells add up, one path or many. For sums, write the working and check it again.
NameDateTime takenScore ___ / 40
- 1.True or false: if the switch is ON, the circuit is closed and current flows. (a) True (b) False
- 2.🔘 Which kind of switch stays where you flip it? (a) a toggle switch (b) a push button (c) a slide switch (d) a reed switch
- 3.🔌 Is a ceramic cup a conductor or an insulator? (a) a conductor (b) an insulator
- 4.✏️ In a cell symbol, which line is the + terminal? (a) both lines (b) neither line (c) the longer line (d) the shorter line
- 5.🔌 Is a rubber eraser a conductor or an insulator? (a) an insulator (b) a conductor
- 6.🔁 What do we call a circuit with a break in it? (a) a closed circuit (b) a series circuit (c) an open circuit (d) a full circuit
- 7.🔘 A cell, a bulb and switches A, B and C are joined one after another in a single loop (series). A is ON, B is OFF and C is ON. Does the bulb glow? (a) No (b) Yes
- 8.True or false: on a cell, “the end with a bump” means the + (positive) end. (a) False (b) True
- 9.💡 In a series circuit, how many paths does the current have? (a) one (b) none (c) two (d) one for each bulb
- 10.🔘 When a switch is ON, the circuit is … (a) open (b) cut (c) broken (d) closed
- 11.🔘 Two switches are in parallel (side by side). When does the bulb glow? (a) never (b) only when both are ON (c) when either is ON (d) only when both are OFF
- 12.🔋 How many 2 V cells must be joined in series to give 4 V?
- 13.🔦 A tester circuit has a new cell, a good bulb and wires with a gap between two clips. We put a graphite rod across the gap. Does the bulb glow? (a) No (b) Yes
- 14.Which of these is true of a series circuit? (a) many paths for current (b) used in house wiring (c) own switch for each bulb (d) a break stops every bulb
- 15.💡 Why is house wiring done in parallel? (a) to save copper only (b) each gets full voltage (c) to make bulbs dim (d) so all go off together
- 16.True or false: a push button closes near a magnet. (a) True (b) False
- 17.🔦 A tester circuit has a new cell, a good bulb and wires with a gap between two clips. We put a steel coin across the gap. Does the bulb glow? (a) Yes (b) No
- 18.✏️ Why do engineers draw circuits with symbols? (a) to hide the circuit (b) quick and clear for all (c) symbols are heavier (d) to make it colourful
- 19.🔦 A tester circuit has a new cell, a good bulb and wires with a gap between two clips. We put a rubber eraser across the gap. Does the bulb glow? (a) No (b) Yes
- 20.Which of these is not safe? (a) keep drinks far away (b) use small battery cells (c) stay away from pylons (d) open a phone charger
- 21.Which of these uses electricity? (a) a bicycle dynamo (b) a cell (c) a television (d) a generator
- 22.True or false: on a cell, “the shorter symbol line” means the + (positive) end. (a) False (b) True
- 23.🔘 A cell, a bulb and switches A and B are joined one after another in a single loop (series). A is ON and B is ON. Does the bulb glow? (a) No (b) Yes
- 24.🔁 Is the circuit closed or open if the loop is complete? (a) closed (b) open
- 25.True or false: on a cell, “the flat end” means the + (positive) end. (a) True (b) False
- 26.🔋 Cells joined + to − in a row (series) give … (a) no voltage (b) a smaller voltage (c) the same voltage (d) a bigger voltage
- 27.True or false: “one out, the rest glow” is true of a parallel circuit. (a) False (b) True
- 28.🔦 A circuit has a new cell, a good bulb and a switch that is ON. All the wires are firmly joined. A gap in one wire is bridged by a glass marble. Does the bulb glow? (a) No (b) Yes
- 29.True or false: to fly kites in open fields is not safe. (a) True (b) False
- 30.Which of these is a conductor? (a) a rubber band (b) a wooden stick (c) aluminium foil (d) a plastic straw
- 31.🔍 Which is the odd one out? (a) fly a kite near wires (b) keep drinks far away (c) build with an adult near (d) stop if a part gets hot
- 32.Which of these is not safe? (a) dry your hands first (b) use mains for a project (c) fly kites in open fields (d) build with an adult near
- 33.Which of these means the circuit is closed? (a) the switch is ON (b) a wire has come loose (c) the bulb is unscrewed (d) the switch is OFF
- 34.✏️ In a circuit diagram, which part is drawn as a circle with A inside? (a) junction (b) motor (c) cell (d) ammeter
- 35.Which of these is true of a parallel circuit? (a) a break stops every bulb (b) a single current path (c) one bulb out, all go out (d) each gets the full volts
- 36.💡 Old festival light strings went fully dark when one bulb failed. How were they joined? (a) in parallel (b) in series (c) not joined (d) by Wi-Fi
- 37.🔍 Which is the odd one out? (a) touch a switch when wet (b) use mains for a project (c) poke things in a socket (d) stop if a part gets hot
- 38.🔘 A cell, a bulb and switches A, B and C are joined one after another in a single loop (series). A is ON, B is ON and C is OFF. Does the bulb glow? (a) Yes (b) No
- 39.💡 4 identical bulbs are joined in series with a battery and a closed switch on the main wire. All the bulbs are in place. How many bulbs glow?
- 40.True or false: a siren mainly makes sound. (a) False (b) True
Answer key
- True
- a toggle switch
- an insulator
- the longer line
- an insulator
- an open circuit
- No
- True
- one
- closed
- when either is ON
- 2
- Yes
- a break stops every bulb
- each gets full voltage
- False
- Yes
- quick and clear for all
- No
- open a phone charger
- a television
- False
- Yes
- closed
- False
- a bigger voltage
- True
- No
- False
- aluminium foil
- fly a kite near wires
- use mains for a project
- the switch is ON
- ammeter
- each gets the full volts
- in series
- stop if a part gets hot
- No
- 4
- True
Free electronics lessons, practice and worksheets at talentjr.in/electronics-for-kids