Electronics Worksheet: Electricity Basics Test
Remember (Find the topic, use the idea): Find the topic: energy, safety, conductor, closed loop, switches, cells, symbols, series or parallel. Use that lesson’s idea — complete loop, all ON for series, cells add up, one path or many. For sums, write the working and check it again.
NameDateTime takenScore ___ / 40
- 1.💡 6 identical bulbs are joined in series with a battery and a closed switch on the main wire. Bulb 6 is taken out of its holder. How many bulbs glow?
- 2.💡 2 identical bulbs are joined in series with a 5 V battery (ideal wires). How many volts does each bulb get? =
- 3.True or false: to touch a fallen wire is not safe. (a) True (b) False
- 4.🔋 Cells joined + to − in a row (series) give … (a) no voltage (b) a bigger voltage (c) a smaller voltage (d) the same voltage
- 5.🔁 A bulb has two contacts. How many must be joined into the loop for it to glow? (a) only one (b) both of them (c) it does not matter (d) none
- 6.🔍 Which is the odd one out? (a) an electric toy car (b) a table fan (c) a street light (d) a ceiling fan
- 7.True or false: a ceramic cup is a conductor. (a) True (b) False
- 8.True or false: on a cell, “usually the red wire” means the + (positive) end. (a) True (b) False
- 9.💡 5 identical bulbs are joined in series with a battery and a closed switch on the main wire. Bulb 1 is taken out of its holder. How many bulbs glow?
- 10.💡 Old festival light strings went fully dark when one bulb failed. How were they joined? (a) by Wi-Fi (b) in series (c) in parallel (d) not joined
- 11.✏️ In a circuit diagram, which part is drawn as a long and a short line? (a) ammeter (b) wire (c) motor (d) cell
- 12.🔘 Two switches are in series. When does the bulb glow? (a) when both are OFF (b) never (c) when either is ON (d) when both are ON
- 13.Which drawing is the symbol for a battery? (a) two equal parallel lines (b) a circle with an X in it (c) triangle, bar and arrows (d) many long-short pairs
- 14.Which of these is true of a parallel circuit? (a) a break stops every bulb (b) bulbs share the voltage (c) a single current path (d) used in house wiring
- 15.🔦 A circuit has a new cell, a good bulb and a switch that is ON. One wire has come loose from the cell. A gap in one wire is bridged by a copper wire. Does the bulb glow? (a) No (b) Yes
- 16.🔦 A circuit has a used-up (dead) cell, a good bulb and a switch that is ON. All the wires are firmly joined. A gap in one wire is bridged by a woollen thread. Does the bulb glow? (a) No (b) Yes
- 17.🔘 A bulb and a cell are joined through 6 switches one after another in a single loop (series). What is the smallest number of switches that must be ON to light the bulb?
- 18.💡 5 identical bulbs are joined in series with a battery and a closed switch on the main wire. Bulb 4 is taken out of its holder. Does bulb 5 glow? (a) No (b) Yes
- 19.🔘 Switch A is on the main wire next to the cell and the bulb; then the wire splits into two side-by-side paths, one with switch B and one with switch C. A is ON, B is ON and C is OFF. Does the bulb glow? (a) Yes (b) No
- 20.✏️ In a circuit diagram, which part is drawn as a circle with an X in it? (a) switch (b) bulb (c) motor (d) resistor
- 21.🔘 Which kind of switch flips up or down? (a) a toggle switch (b) a reed switch (c) a slide switch (d) a push button
- 22.🔦 A circuit has a new cell, a good bulb and a switch that is ON. All the wires are firmly joined. A gap in one wire is bridged by aluminium foil. Does the bulb glow? (a) Yes (b) No
- 23.💡 3 identical bulbs are in parallel and each one takes 0.2 A. What total current (in amperes) comes from the battery? =
- 24.🔦 A tester circuit has a new cell, a good bulb and wires with a gap between two clips. We put a glass marble across the gap. Does the bulb glow? (a) Yes (b) No
- 25.🔋 8 identical 1.5 V cells are joined in series, but one of them is put in the wrong way round. What is the total voltage now (in volts)? =
- 26.Which of these is an insulator? (a) a plastic straw (b) a copper wire (c) an iron nail (d) a safety pin
- 27.🔋 What should you do with used-up cells? (a) bury them in soil (b) give them for recycling (c) throw them in a fire (d) cut them open
- 28.Which drawing is the symbol for a switch? (a) two equal parallel lines (b) a line lifted at a gap (c) two or more cell symbols (d) a circle with V inside
- 29.True or false: if a cell is taken out, the circuit is open and no current flows. (a) False (b) True
- 30.🔘 Which kind of switch slides side to side? (a) a push button (b) a toggle switch (c) a reed switch (d) a slide switch
- 31.🔘 Which kind of switch closes when tipped over? (a) a toggle switch (b) a slide switch (c) a tilt switch (d) a push button
- 32.🔘 When a switch is ON, the circuit is … (a) open (b) closed (c) cut (d) broken
- 33.🔦 A circuit has a new cell, a good bulb and a switch that is ON. All the wires are firmly joined. Does the bulb glow? (a) No (b) Yes
- 34.True or false: on a cell, “usually the black wire” means the − (negative) end. (a) False (b) True
- 35.True or false: on a cell, “the longer symbol line” means the − (negative) end. (a) True (b) False
- 36.What does a toggle switch do? (a) slides side to side (b) springs back when let go (c) stays where you flip it (d) works only while pressed
- 37.🔍 Which is the odd one out? (a) use a cable with cuts (b) touch a fallen wire (c) fly a kite near wires (d) dry your hands first
- 38.Which of these means the circuit is closed? (a) the switch is OFF (b) all wires are joined (c) a wire is cut (d) a cell is taken out
- 39.🔗 Series or parallel circuit: “one bulb out, all go out”? (a) series (b) parallel
- 40.🔦 A circuit has a new cell, a good bulb and a switch that is ON. All the wires are firmly joined. A gap in one wire is bridged by a dry cork. Does the bulb glow? (a) Yes (b) No
Answer key
- 0
- 2.5
- True
- a bigger voltage
- both of them
- a street light
- False
- True
- 0
- in series
- cell
- when both are ON
- many long-short pairs
- used in house wiring
- No
- No
- 6
- No
- Yes
- bulb
- a toggle switch
- Yes
- 0.6
- No
- 9
- a plastic straw
- give them for recycling
- a line lifted at a gap
- True
- a slide switch
- a tilt switch
- closed
- Yes
- True
- False
- stays where you flip it
- dry your hands first
- all wires are joined
- series
- No
Free electronics lessons, practice and worksheets at talentjr.in/electronics-for-kids