Electronics Worksheet: Electricity Basics Test
Remember (Find the topic, use the idea): Find the topic: energy, safety, conductor, closed loop, switches, cells, symbols, series or parallel. Use that lesson’s idea — complete loop, all ON for series, cells add up, one path or many. For sums, write the working and check it again.
NameDateTime takenScore ___ / 40
- 1.🔁 What must there be for a current to flow? (a) one loose end (b) a complete loop (c) a plastic gap (d) a broken path
- 2.True or false: to keep drinks far away is not safe. (a) False (b) True
- 3.💡 Why is house wiring done in parallel? (a) so all go off together (b) to save copper only (c) to make bulbs dim (d) each gets full voltage
- 4.💡 3 identical bulbs are joined in parallel across a 9 V battery (ideal wires). How many volts does each bulb get? =
- 5.Which of these mainly makes movement? (a) a doorbell (b) a mixer grinder (c) a rice cooker (d) an LED lamp
- 6.💡 In a series circuit, how many paths does the current have? (a) one for each bulb (b) two (c) none (d) one
- 7.True or false: to use mains for a project is not safe. (a) False (b) True
- 8.🔘 Switch A is on the main wire next to the cell and the bulb; then the wire splits into two side-by-side paths, one with switch B and one with switch C. A is OFF, B is ON and C is ON. Does the bulb glow? (a) No (b) Yes
- 9.⚡ What does a mixer grinder mainly change electricity into? (a) sound (b) light (c) movement (d) heat
- 10.💡 5 identical bulbs are joined in series with a 5 V battery (ideal wires). How many volts does each bulb get? =
- 11.✏️ Why do engineers draw circuits with symbols? (a) to make it colourful (b) quick and clear for all (c) symbols are heavier (d) to hide the circuit
- 12.🔗 Series or parallel circuit: “a break stops every bulb”? (a) parallel (b) series
- 13.🔋 On a cell, does “the longer symbol line” mean the + end or the − end? (a) + (positive) (b) − (negative)
- 14.🔁 A bulb has two contacts. How many must be joined into the loop for it to glow? (a) both of them (b) none (c) only one (d) it does not matter
- 15.🔘 Which kind of switch stays where you flip it? (a) a toggle switch (b) a tilt switch (c) a reed switch (d) a slide switch
- 16.True or false: to touch a switch when wet is not safe. (a) True (b) False
- 17.Which drawing is the symbol for a battery? (a) a circle with an X in it (b) a circle with a cross (c) two or more cell symbols (d) a small empty box
- 18.🔦 A tester circuit has a new cell, a good bulb and wires with a gap between two clips. We put a steel spoon across the gap. Does the bulb glow? (a) Yes (b) No
- 19.🔘 Which kind of switch slides side to side? (a) a reed switch (b) a push button (c) a toggle switch (d) a slide switch
- 20.🔍 Which is the odd one out? (a) a torch (b) a traffic signal (c) an electric toy car (d) an LED lamp
- 21.🔋 8 identical 3 V cells are joined in series (+ of one cell to − of the next). What is the total voltage (in volts)? =
- 22.True or false: to use small battery cells is safe. (a) False (b) True
- 23.True or false: a push button springs back when let go. (a) False (b) True
- 24.🔦 A circuit has a used-up (dead) cell, a good bulb and a switch that is ON. All the wires are firmly joined. A gap in one wire is bridged by a steel coin. Does the bulb glow? (a) Yes (b) No
- 25.True or false: many long-short pairs is the symbol for a battery. (a) True (b) False
- 26.💡 5 identical bulbs are joined in series with a battery and a closed switch on the main wire. Bulb 4 is taken out of its holder. Does bulb 1 glow? (a) Yes (b) No
- 27.🔍 Which is the odd one out? (a) stay away from pylons (b) touch a switch when wet (c) take cells out after use (d) dry your hands first
- 28.💡 3 identical bulbs are joined in series with a battery and a closed switch on the main wire. Bulb 1 is taken out of its holder. Does bulb 2 glow? (a) No (b) Yes
- 29.⚠️ Is it safe to stop if a part gets hot? (a) not safe (b) safe
- 30.Which of these mainly gives out heat? (a) an exhaust fan (b) an electric kettle (c) a school bell (d) a night lamp
- 31.True or false: to climb an electric pole is not safe. (a) False (b) True
- 32.🔘 A cell and a bulb are joined to two side-by-side paths: path 1 has switches A and B one after another, path 2 has switch C. A is OFF, B is OFF and C is OFF. Does the bulb glow? (a) Yes (b) No
- 33.Which drawing is the symbol for a diode? (a) a straight line (b) a circle with a cross (c) triangle, bar and arrows (d) triangle against a bar
- 34.True or false: a reed switch closes near a magnet. (a) True (b) False
- 35.True or false: “a break stops every bulb” is true of a series circuit. (a) True (b) False
- 36.What does a tilt switch do? (a) works only while pressed (b) closes when tipped over (c) springs back when let go (d) stays where you flip it
- 37.⚡ What does a room heater mainly change electricity into? (a) movement (b) light (c) sound (d) heat
- 38.True or false: on a cell, “the flat end” means the + (positive) end. (a) True (b) False
- 39.🔍 Which is the odd one out? (a) a traffic signal (b) a siren (c) a school bell (d) a buzzer
- 40.🔁 Is the circuit closed or open if a wire is cut? (a) closed (b) open
Answer key
- a complete loop
- False
- each gets full voltage
- 9
- a mixer grinder
- one
- True
- No
- movement
- 1
- quick and clear for all
- series
- + (positive)
- both of them
- a toggle switch
- True
- two or more cell symbols
- Yes
- a slide switch
- an electric toy car
- 24
- True
- True
- No
- True
- No
- touch a switch when wet
- No
- safe
- an electric kettle
- True
- No
- triangle against a bar
- True
- True
- closes when tipped over
- heat
- False
- a traffic signal
- open
Free electronics lessons, practice and worksheets at talentjr.in/electronics-for-kids