Engineering Worksheet: Tools and Safety

Engineering lesson 7: Tools and workshop safety · Set 10 · 40 questions

Engineer's tip (Right tool, safe hands): Measure → tape measure, protractor · level → spirit level · cut → saw · nails → hammer. Screws → screwdriver · nuts → spanner · holes → drill · wire → pliers · smooth → sandpaper. Safe: goggles, tied hair, clamps, tidy bench, cut away from you, adult for hot or power tools.

1. 1.🦺 What protects your eyes when sawing or drilling? (a) sunglasses (b) a cap (c) safety goggles (d) nothing
2. 2.Which job is a spirit level for? (a) check a shelf is level (b) turn a screw (c) smooth a rough edge (d) tighten a nut
3. 3.🦺 How should you carry scissors? (a) points up, open (b) while running (c) points down, closed (d) by the blades
4. 4.🔍 Which is the odd one out? (a) cut towards your hand (b) leave tools on the floor (c) wear safety goggles (d) run while holding tools
5. 5.🦺 In the workshop, is it safe to use a cracked tool? (a) not safe (b) safe
6. 6.🔍 Which is the odd one out? (a) touch a hot glue tip (b) put tools back after use (c) wear safety goggles (d) let adults use hot glue
7. 7.True or false: to measure an angle, use a protractor. (a) False (b) True
8. 8.True or false: to leave tools on the floor is not safe. (a) True (b) False
9. 9.True or false: to wear safety goggles is not safe. (a) False (b) True
10. 10.🔧 Which tool would you use to tighten a nut? (a) sandpaper (b) pliers (c) a spanner (d) a screwdriver
11. 11.True or false: to smooth a rough edge, use sandpaper. (a) True (b) False
12. 12.Which job is a screwdriver for? (a) measure a long length (b) tighten a nut (c) turn a screw (d) make a hole in wood
13. 13.🦺 Who should use hot glue guns and power tools in a kids’ project? (a) any child alone (b) an adult (c) a stranger (d) the youngest child
14. 14.🦺 In the workshop, is it safe to cut away from your body? (a) safe (b) not safe
15. 15.🔧 Which tool would you use to turn a screw? (a) a spanner (b) a tape measure (c) a screwdriver (d) a saw
16. 16.True or false: to measure a long length, use a tape measure. (a) False (b) True
17. 17.Which job is a tape measure for? (a) cut a wooden plank (b) check a shelf is level (c) measure a long length (d) drive in a nail
18. 18.Which job is a protractor for? (a) measure an angle (b) smooth a rough edge (c) measure a long length (d) check a shelf is level
19. 19.🔧 Which tool would you use to smooth a rough edge? (a) sandpaper (b) a saw (c) pliers (d) a tape measure
20. 20.🔍 Which is the odd one out? (a) wear safety goggles (b) let adults use hot glue (c) tie back long hair (d) play near a moving drill
21. 21.🦺 In the workshop, is it safe to carry scissors closed? (a) safe (b) not safe
22. 22.🔍 Which is the odd one out? (a) let adults use hot glue (b) use a cracked tool (c) play near a moving drill (d) cut towards your hand
23. 23.Which job is a hand drill for? (a) drive in a nail (b) measure an angle (c) measure a long length (d) make a hole in wood
24. 24.🔧 Which tool would you use to check a shelf is level? (a) a spanner (b) a protractor (c) pliers (d) a spirit level
25. 25.🦺 In the workshop, is it safe to put tools back after use? (a) safe (b) not safe
26. 26.🔍 Which is the odd one out? (a) wear safety goggles (b) use a cracked tool (c) cut away from your body (d) put tools back after use
27. 27.True or false: to tie back long hair is not safe. (a) False (b) True
28. 28.Which job is a saw for? (a) turn a screw (b) tighten a nut (c) cut a wooden plank (d) smooth a rough edge
29. 29.Which job is a hammer for? (a) drive in a nail (b) measure a long length (c) cut a wooden plank (d) turn a screw
30. 30.True or false: to make a hole in wood, use a hand drill. (a) True (b) False
31. 31.True or false: to check a shelf is level, use a spirit level. (a) False (b) True
32. 32.True or false: to carry scissors closed is safe. (a) True (b) False
33. 33.🦺 In the workshop, is it safe to touch a hot glue tip? (a) not safe (b) safe
34. 34.True or false: to let adults use hot glue is safe. (a) False (b) True
35. 35.🔍 Which is the odd one out? (a) play near a moving drill (b) cut towards your hand (c) touch a hot glue tip (d) carry scissors closed
36. 36.True or false: to cut towards your hand is safe. (a) True (b) False
37. 37.Which job is sandpaper for? (a) measure a long length (b) smooth a rough edge (c) make a hole in wood (d) cut a wooden plank
38. 38.True or false: to drive in a nail, use a saw. (a) False (b) True
39. 39.🔧 Which tool would you use to cut a wooden plank? (a) a saw (b) a spirit level (c) pliers (d) a hammer
40. 40.Which job is a spanner for? (a) make a hole in wood (b) drive in a nail (c) cut a wooden plank (d) tighten a nut

Free engineering lessons, practice and worksheets at talentjr.in/engineering-for-kids