TalentJR

Electricity: Magnetic and Heating Effects – Class 8 Science Chapter 4 Notes & NCERT PDF

Class 8ScienceChapter 4NCERT book: Curiosity - Science Class 8

Notes and a simple summary of Chapter 4 of the NCERT Class 8 Science book, with the official chapter PDF, flashcards, an MCQ quiz and an AI tutor for your doubts.

🎧 Listen to the content

Chapter 4: Electricity: Magnetic and Heating Effects

Probe and Ponder

  • If there is no lamp in a circuit, how else can we tell that current is flowing?
  • Can we make temporary magnets? How?
  • How is heat produced inside electrical appliances?
  • How do we know a cell is dead? Can every cell be recharged?
  • Introduction

    At a school science exhibition, Mohini and Aakarsh see a model of a lifting electromagnet made by their senior Sumana. Instead of a crane hook, there is an iron nail wrapped with wire and connected to a battery. When Sumana closes the circuit, the nail picks up iron paper clips; when she opens it, the clips fall. There is no magnet in the model — only an electric circuit! This chapter explains what they saw: the magnetic effect and the heating effect of electric current, and how cells and batteries produce electricity.

    Key Concepts

    4.1 Does an electric current have a magnetic effect?

    In Activity 4.1, a wire is stretched between two nails on cardboard and a magnetic compass is placed under it. When the switch is turned ON, the compass needle deflects; when it is turned OFF, the needle returns to its original direction.

    When electric current flows through a conductor (like a wire), it produces a magnetic field around it. This phenomenon is known as the magnetic effect of electric current. The magnetic field disappears when the current stops.
  • The region around a magnet or a current-carrying wire where its magnetic effect can be felt is said to have a magnetic field.
  • Hans Christian Oersted (1777–1851), a professor in Denmark, discovered this link between electricity and magnetism in 1820 when he noticed a compass needle deflect as a circuit was closed or opened.
  • Uses of the magnetic effect: electromagnets, electric bells, motors, fans, loudspeakers.
  • 4.1.1 Electromagnets

  • A wire coiled tightly around an iron nail and connected to a cell picks up iron paper clips; they fall when the current stops (Activity 4.2).
  • A paper cylinder wound with about 50 turns of insulated wire deflects compass needles when current flows (Activity 4.3). Inserting an iron nail as the core makes the deflection much larger.
  • A current-carrying coil that behaves as a magnet is called an electromagnet. Most practical electromagnets have an iron core to make them stronger.
  • Poles: An electromagnet has a North and a South pole, like a bar magnet (Activity 4.4). If the North pole of a compass is attracted to end A, then end A is a South pole (unlike poles attract).
  • Changing strength: More cells (more current) or more turns of the coil make the electromagnet stronger.
  • Reversing poles: Changing the direction of the current reverses the poles.
  • Earth's magnetism: Movement of liquid iron in Earth's core creates electric currents that produce Earth's magnetic field. Migratory birds, fish and animals use it to navigate, and it shields us from harmful particles from space.
  • 4.1.2 Lifting electromagnets

    Strong electromagnets hung from cranes lift iron and steel objects when the current is ON and release them when it is OFF. They are used in factories and scrap yards to move, lift and sort heavy metal items.

    4.2 Does a current-carrying wire get hot?

    In Activity 4.5, a nichrome wire (about 0.3 mm thick, 26–28 gauge, 10 cm long) is tied between two nails 5 cm apart and connected to a cell. After about 30 seconds of current, the wire feels warm.

    When an electric current passes through a conductor, it gets heated. This is the heating effect of electric current.
  • Every conductor offers some resistance to current. Nichrome offers higher resistance than a copper wire of the same size and length, so more electrical energy changes into heat.
  • With 2 cells the wire heats more than with 1 cell — heat depends on the amount of current.
  • Heat produced depends on the wire's material, thickness, length and the time for which current flows.
  • Appliances using the heating effect: room heater, electric stove, electric kettle, electric iron, water-heating immersion rod, hair dryer, incandescent lamp. They contain a heating element (rod or coil).
  • Problems: energy loss in transmission wires; overheating can melt plastic parts of plugs and sockets or cause fires. Use wires, plugs and sockets rated for the current; household circuits have safety devices.
  • Industry: electric furnaces melt and recycle scrap steel.
  • 4.3 How does a battery generate electricity?

    Voltaic (Galvanic) cell: two rods (electrodes) of different metals dipped in a liquid electrolyte (a weak acid or salt solution). A chemical reaction between the electrodes and the electrolyte produces electricity. When the chemicals are used up, the cell is "dead".

  • Galvani saw a dead frog's leg kick when touched with copper and iron and thought the electricity came from the frog. Volta replaced the frog's leg with saltwater-soaked paper and still got a current — proving it came from the metals and liquid. This led to the first battery.
  • Lemon cell (Activity 4.6): 5–6 lemons, each with a copper wire and an iron nail, joined in a chain can light an LED. The lemon juice is the electrolyte. If the LED does not glow, reverse it — current passes only when its longer leg (positive) connects to the positive terminal.

  • Common metal pairs: zinc/copper, zinc/silver, aluminium/copper, iron/copper, magnesium/copper, lead/copper. Copper acts as a positive electrode; zinc acts as a negative electrode.
  • Dry cell: the electrolyte is a thick moist paste. A zinc container is the negative terminal; a carbon rod with a metal cap at the centre is the positive terminal. It is single-use.

    Rechargeable batteries are used in laptops, phones, cameras, inverters and vehicles. They can be reused many times but slowly wear out. Lithium-ion (Li-ion) batteries are most common and use metals like lithium and cobalt. Scientists are developing solid-state batteries with solid electrolytes — safer, faster charging and longer lasting.

  • E-waste: "Dead" batteries may still contain acids and metals such as lead, cadmium, nickel or lithium. Dispose of them at e-waste recycling facilities, not in regular garbage.
  • Activities in the Chapter

  • Activity 4.1 (compass under a wire): Aim — check whether current has a magnetic effect. Observation — needle deflects when current flows, returns when it stops. Conclusion — a current-carrying wire produces a magnetic field.
  • Activities 4.2–4.3 (coil and nail): Aim — make an electromagnet. Observation — clips cling only while current flows; iron core increases deflection. Conclusion — a current-carrying coil acts as a magnet.
  • Activity 4.4 (poles): Aim — find the poles of an electromagnet using a compass. Conclusion — ends A and B have opposite polarity.
  • Activity 4.5 (nichrome wire): Aim — test the heating effect. Observation — wire warms after 30 s. Safety — touch only momentarily, under a teacher's supervision.
  • Activity 4.6 (lemon cell): Aim — build a Voltaic cell. Observation — the LED glows when connected the right way round.
  • Key Terms

  • Magnetic field (चुंबकीय क्षेत्र) — region where a magnetic effect can be felt
  • Magnetic effect of current (विद्युत धारा का चुंबकीय प्रभाव)
  • Electromagnet (विद्युत चुंबक) — current-carrying coil that acts as a magnet
  • Iron core (लोहे का क्रोड)
  • Heating effect of current (विद्युत धारा का तापीय प्रभाव)
  • Resistance (प्रतिरोध) — opposition to the flow of current
  • Nichrome (नाइक्रोम) — high-resistance wire used in heaters
  • Heating element (तापन अवयव)
  • Electrode (इलेक्ट्रोड) — metal rod in a cell
  • Electrolyte (विद्युत अपघट्य) — liquid or paste that conducts in a cell
  • Voltaic cell (वोल्टीय सेल)
  • Dry cell (शुष्क सेल)
  • Rechargeable battery (पुनः आवेशनीय बैटरी)
  • E-waste (ई-कचरा)
  • Real-life Connections

  • Cranes in scrap yards use lifting electromagnets.
  • Your electric iron, kettle and immersion rod use the heating effect.
  • Your phone uses a rechargeable Li-ion battery — which is why an old phone battery needs charging more often.
  • Common Misconceptions

  • "An electromagnet is a permanent magnet." — No, it is a magnet only while current flows.
  • "The electricity in Galvani's experiment came from the frog." — Volta showed it came from the two metals and the liquid.
  • "A dead battery is harmless and can go in the dustbin." — It still contains harmful chemicals; recycle it as e-waste.
  • "Only copper wires get hot." — Every conductor heats up; nichrome heats more because of its higher resistance.
  • Keep the Curiosity Alive — Hints

  • The solution in a Voltaic cell is the electrolyte; a current-carrying coil behaves like a magnet.
  • Dry cells are more portable than Voltaic cells (so "less portable" is False). A coil is an electromagnet only when current flows (True). One cell attracts fewer clips than two cells (False).
  • A nichrome wire carrying current both warms up and deflects a compass — both effects happen.
  • Voltaic cell → chemical reactions; electric iron → heating effect; nichrome → best suited for heaters; electromagnet → magnetic effect.
  • Nichrome is used in heaters because it generates more heat for a given current.
  • An LED glows with lemon juice, not pure water, as the electrolyte.
  • Without the iron nail, the coil still deflects the compass, but less.
  • Coils of iron, copper, aluminium and nichrome all carry current, so all four deflect a compass.
  • 💡 Key Learning Points

    • ✓A current-carrying wire produces a magnetic field that deflects a compass needle (Oersted, 1820).
    • ✓An electromagnet is a current-carrying coil; an iron core, more current or more turns make it stronger, and reversing the current reverses its poles.
    • ✓Current heats a conductor; heat depends on current, material, thickness, length and time — nichrome's high resistance makes it ideal for heaters.
    • ✓A Voltaic cell produces electricity from a chemical reaction between two different metal electrodes and an electrolyte; a dry cell uses a paste electrolyte.
    • ✓Rechargeable (Li-ion) batteries can be reused but wear out, and used batteries must be disposed of as e-waste.

    👨‍🏫 Teaching Tips

    • →Open with Sumana's lifting-electromagnet model: build it live with a nail, wire and cell and let students predict what happens when the switch opens.
    • →Run Activity 4.1 with several compasses around the wire so the whole class can see the deflection switch on and off.
    • →Have groups compare electromagnets with 25, 50, 75 and 100 turns (the 'Discover, design, and debate' task) and plot clips lifted vs turns.
    • →Demonstrate the nichrome heating activity yourself first and insist on momentary touching only — model the Safety First rule.
    • →Build a class lemon battery with 5–6 lemons; when the LED does not glow, ask students to reason why before reversing it.
    • →Bring a dead dry cell cut in half (teacher only) or a labelled diagram to identify the zinc case, carbon rod and paste.
    • →Tell the Galvani–Volta story as a debate: who was right and what experiment settled it?
    • →Link to society: set up a class e-waste collection box for used batteries.

    📋 Assessment Questions

    1. Can the student explain why a compass needle deflects near a current-carrying wire?
    2. Can the student state two ways to make an electromagnet stronger and one way to reverse its poles?
    3. Can the student explain why nichrome, not copper, is used as a heating element?
    4. Can the student label the parts of a dry cell and name the electrolyte in a lemon cell?
    5. Can the student give reasons for recycling batteries as e-waste?

    👩‍🏫 Class 8 Science classes near you — online or at home

    Prefer a real teacher? TalentJR teachers take live online classes anywhere in India and visit homes in selected cities. Tell us what you need and our team will call you with timings and fees.

    • Live online classesSmall groups or 1:1 with a teacher, from home, any city.
    • Teacher at homeA TalentJR teacher visits your home (selected cities).
    • At a centreClasses at a TalentJR partner centre near you, where available.