TalentJR apps
Textbook: Geology – Class 11 (Balbharati, official free PDF) · pages 17–25
Why does a basalt boulder by a ghat road look like an onion, and why is Deccan soil black and sticky? This chapter explains how rocks break up (mechanical weathering) and rot (chemical weathering), which minerals survive longest, the factors that control weathering, spheroidal weathering, and how soil, its horizons and its conservation work — with every exercise answered.
Weathering is the breakdown of rocks and minerals where they lie (in situ). Mechanical (physical) weathering only makes pieces smaller; chemical weathering changes the minerals into new substances. The air, water and living things are its agents, and the products may stay in place or be carried away.
Mechanical weathering works by frost wedging (water freezes in cracks and expands about 9%), thermal expansion and contraction (strong day–night temperature swings in deserts), exfoliation or sheeting (unloading of buried granite so outer shells peel off) and by roots, burrowing animals and human activity such as quarrying.
Chemical weathering works by dissolution, hydration, hydrolysis, carbonation, oxidation and reduction. Feldspar turns into kaolinite clay by hydrolysis, calcite dissolves as calcium bicarbonate, and ferrous iron turns to rusty ferric oxide. The Goldich series shows that minerals formed at high temperature (olivine, Ca-plagioclase) weather fastest and quartz is the most stable.
How fast rocks weather depends on rock type, climate, slope and exposed surface area, all acting over time. Hot humid climates favour chemical weathering, hot dry climates favour mechanical weathering. In jointed Deccan basalt, attack from corners and edges rounds the blocks and leaves a fresh core stone inside concentric weathered shells — spheroidal weathering.
Soil is the end product of weathering: about 45% minerals, 5% organic matter and 50% pore space holding air and water. A mature soil profile shows O, A, B, C and R (D) horizons. Climate, organisms, topography, parent material and time decide soil type. Erosion by water, wind and tillage removes fertile topsoil; reforestation, crop rotation, contour ploughing and terracing conserve it. Maharashtra's black cotton soil (regur) is a residual soil formed from basalt.
Get a ✓ Verified tutor for “Earth's Surface : Processes” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A traveller sees a heap of sharp-edged rock pieces at the foot of a steep Himalayan cliff at 4500 m. Which process made it and what is the heap called?
Answer: Frost wedging; the heap of angular fragments is called scree (talus).
Fresh granite (quartz, orthoclase, biotite) weathers in Kerala's hot humid climate. Predict what each mineral becomes.
Answer: Clay (kaolinite) from feldspar and biotite, iron-oxide stain from biotite, and loose quartz grains — a clayey, sandy soil.
Why are weathered shells around a basalt core stone thickest at the old corners of the block?
Answer: Corners are attacked from three sides, so decay is fastest and the weathered shell thickest there; this rounds the block into a sphere.
| Mineral (formula) | What happens on chemical weathering | Stability (Goldich) |
|---|---|---|
| Olivine (Mg,Fe)₂SiO₄ | Mg leaves as bicarbonate, Fe oxidises to hematite, silica leached | Least stable |
| Augite (Ca,Na)(Mg,Fe,Al,Ti)(Si,Al)₂O₆ | Ca and Mg dissolve as bicarbonate; Al and Si form clay by hydrolysis | Low |
| Hornblende (Ca,Na)₂₋₃(Mg,Fe,Al)₅(Al,Si)₈O₂₂(OH)₂ | Like augite; strong oxidation can leach silica and leave aluminium hydroxide | Low–medium |
| Biotite K(Mg,Fe)₃AlSi₃O₁₀(OH,F)₂ | K dissolves as bicarbonate; Al and Si form clay; Fe gives rusty stain | Medium |
| Orthoclase KAlSi₃O₈ | Hydrolysis to kaolinite; under extreme leaching, gibbsite (aluminium hydroxide) and soluble silica | Medium–high |
| Muscovite KAl₂(AlSi₃O₁₀)(OH,F)₂ | Very slow; may alter to clay, often survives as shiny flakes | High |
| Quartz SiO₂ | Practically unchanged; only slowly dissolved by alkaline water | Most stable |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 Fill in the blanks: (1) The process of freezing and thawing of water due to temperature changes and its effect on rocks is known as … (2) Vertical exposure of soil horizons is referred to as a …
Answer: (1) frost action (frost wedging). (2) soil profile.
2. Q.2 Choose the correct option: (1) Development of spheroidal weathering is independent of — rock type / chemical decomposition / percolating water / mutually perpendicular joints. (2) Mechanical weathering is more pronounced in — hot and humid / hot and arid / cold and humid / wet and humid climate. (3) The most common type of mechanical weathering is — sheeting / thermal expansion and contraction / oxidation / burrowing organisms. (4) Calcite in limestone is transported in water during — oxidation / reduction / dissolution / frost action.
Answer: (1) (a) rock type — it occurs in basalt, dolerite, granite and others; what it needs is joints, water and chemical decay. (2) (b) hot and arid. (3) (b) thermal expansion and contraction (of the options given; in cold regions frost wedging, not listed, is the most effective). (4) (c) dissolution.
3. Q.3 Choose the correct alternative: (1) Which is true about chemical weathering? (i) all minerals decompose at the same rate (ii) minerals crystallising at lower temperature are more susceptible (iii) minerals crystallising at higher temperature are more susceptible (iv) all minerals resist equally. (2) Which statement is incorrect? (i) plants stabilise soil profiles (ii) animals tend to increase erosion (iii) steep slopes encourage rapid soil loss (iv) study of soil is called 'Pedosphere'.
Answer: (1) (iii) — high-temperature minerals such as olivine weather first. (2) (iv) is incorrect: the study of soil is pedology; the pedosphere is the soil layer of the Earth.
4. Q.4 Find the odd one out: (1) (i) weathered product may stay in situ or be transported (ii) freezing and thawing gives frost wedging (iii) thermal effect is common in arid regions (iv) soil is a naturally layered material. (2) (i) temperature, wind, basalt, glaciers, organisms (ii) dissolution, hydration, hydrolysis, carbonation, erosion (iii) O, A, B, C horizons (iv) cracks, fractures, cavities, joints.
Answer: (1) (d) iv — the others describe weathering; iv defines soil. (2) (b) ii — dissolution, hydration, hydrolysis and carbonation are chemical weathering processes, while erosion is removal and transport. (Note: in group i, basalt is also out of place as a rock among agents; groups iii and iv are consistent.)
5. Q.5 Give geological terms: (1) material from which soil forms (2) mechanical weathering by freezing and thawing of water in cracks (3) layers peeling off the outer surface of exposed rock (4) weathering that leaves concentric rings around a central boulder.
Answer: (1) Parent material. (2) Frost wedging (frost action). (3) Exfoliation (sheeting). (4) Spheroidal weathering.
6. Q.6 (1) Discuss the role of topography in soil formation.
Answer: Steep slopes let rain and gravity carry weathered material away quickly, so soil there stays thin, stony and immature. On gentle slopes and flat land the material stays in place, water soaks in, and deep, well-layered soils develop; valleys also receive soil washed down from above, so valley soils (like the deep black soils of Deccan valleys) are thicker and richer. Height and slope direction change temperature and moisture, which also changes how fast weathering and soil formation go.
7. Q.6 (2) How are mechanical and chemical weathering complementary to each other?
Answer: Mechanical weathering breaks rock into smaller pieces and opens cracks, which greatly increases the surface area exposed to water and air, so chemical attack speeds up. Chemical weathering, in turn, rots minerals (feldspar to clay, iron to oxides), weakening the grain bonds and causing swelling, so the rock crumbles more easily under frost, heat or roots. Each process prepares the rock for the other, so both usually act together; spheroidal weathering is a good example.
8. Q.7 (1) Explain the process of oxidation and reduction in chemical weathering.
Answer: Oxidation is reaction with oxygen from air or oxygen-rich water. Minerals containing ferrous iron (Fe²⁺), such as olivine, pyroxene, biotite and magnetite, lose electrons and their iron becomes ferric (Fe³⁺), e.g. 4FeO + O₂ → 2Fe₂O₃. The new oxides (hematite, limonite) are red, brown or yellow and weaken the mineral, as seen in the rusty crust on weathered basalt. Reduction is the reverse: it happens in waterlogged, oxygen-free (anoxic) places like bogs and swamps, often helped by bacteria. Ferric iron is reduced to ferrous iron, which is soluble and moves away in water, bleaching the rock (grey or greenish colours). When this water later meets air, the iron is oxidised again and precipitates as hematite or limonite.
9. Q.7 (2) Describe the factors affecting weathering.
Answer: (i) Nature of rock — composition and texture: porous sandstone weathers faster than compact granite; minerals high in the Goldich series decay first. (ii) Climate — hot humid regions favour chemical weathering, hot deserts favour mechanical weathering, cold humid regions favour both, cold dry regions little of either. (iii) Slope — steep, bare slopes lose loose material under gravity, so fresh rock is constantly exposed. (iv) Surface area — joints, cracks and small fragments expose more surface, so decay is faster; massive rock decays slowly. (v) Time — the longer a rock is exposed, the more it is weathered. Vegetation and organisms also add acids and root pressure.
10. Q.8 Passage on Panchgani mesas: (1) How were the flat-topped hills and tableland made? (2) Role of stream incision? (3) Why a three-stage process?
Answer: (1) Long ago a wide land surface on Deccan basalt was deeply weathered and capped by a hard iron-rich laterite crust (ferricrete). This tough caprock protects the softer basalt below, so erosion lowered the surroundings faster than the capped areas (differential erosion). The capped remnants stand as flat-topped, cliff-edged mesas and the large Panchgani tableland. (2) Streams cut down through the laterite cap, splitting the once-continuous surface into separate blocks; their valleys then widened, so stream incision started the breaking-up of the plateau into isolated mesas. (3) Because three different things happen one after another: first the laterite surface forms; second, streams breach and fragment it; third, the cliffs retreat backwards and the isolated patches are worn down from all sides (circum-denudation). The nearly equal heights of the mesas show they are pieces of one old surface.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Mechanical weathering changes a rock's…
Answer: B. Physical breakdown makes smaller pieces of the same material.
2. Frost wedging is most effective in…
Answer: B. It needs repeated freezing and thawing.
3. Angular debris piled at the foot of a cliff is called…
Answer: D. Scree is made of blocks loosened mainly by frost action.
4. Exfoliation domes are most typical of…
Answer: B. Plutonic granite expands when its cover is removed.
5. Feldspar changing to kaolinite is an example of…
Answer: C. H⁺ and OH⁻ of water react with the feldspar.
6. Hematite + water → limonite is…
Answer: C. Water is taken into the iron oxide structure.
7. The red-brown stain on weathered basalt comes from…
Answer: D. Fe²⁺ becomes Fe³⁺ oxide.
8. Calcite in limestone is carried away in water mainly by…
Answer: B. CaCO₃ + H₂O + CO₂ → Ca(HCO₃)₂.
9. In the Goldich series the most stable mineral is…
Answer: A. Quartz has a strong covalent Si–O framework.
10. Minerals that crystallise at high temperature are…
Answer: A. They formed far from surface conditions.
11. Mechanical weathering is most pronounced in a … climate.
Answer: A. Large daily temperature changes, little water for chemical attack.
12. Spheroidal weathering in Deccan basalt depends on…
Answer: B. Joints let water attack the blocks from all sides.
13. The study of soil is called…
Answer: A. The pedosphere is the soil layer itself, not its study.
14. Clay and iron washed down from above collect in the…
Answer: D. B is the zone of accumulation.
15. Which is NOT a soil conservation method?
Answer: B. Slash-and-burn removes cover and speeds erosion.
Get a ✓ Verified tutor for “Earth's Surface : Processes” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Earth's Surface : Processes the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 35 minutes
Get a ✓ Verified tutor for “Earth's Surface : Processes” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Earth's Surface : Processes.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Earth's Surface : Processes” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.