TalentJR apps
Textbook: Geology – Class 11 (Balbharati, official free PDF) · pages 49–56
The black basalt of the Deccan, the marble of the Taj Mahal and the sandstone of old forts were each made by a different process. This chapter explains exogenic and endogenic processes, how igneous, sedimentary and metamorphic rocks form and are classified, their characteristics, and how the rock cycle links them — with every exercise answered.
Earth has two energy sources: the Sun's energy drives exogenic processes at the surface (weathering, erosion, the water cycle, sedimentation) and Earth's internal (geothermal) heat drives endogenic processes (plate movement, volcanism, mountain building, metamorphism). Meteorite impacts are extraterrestrial processes — Lonar crater lake in Buldhana is an example. Petrology is the study of rocks; petrography studies them in thin section, petrogenesis studies their origin, and lithology describes them in hand specimen.
Igneous rocks form when magma (about 800–1400 °C, with dissolved gases) cools. Slow cooling at depth gives coarse, equigranular plutonic rocks (granite, gabbro); cooling at intermediate depth gives hypabyssal rocks (dolerite); fast cooling at the surface gives fine-grained volcanic rocks (basalt, rhyolite); very fast cooling gives glass (obsidian, pitchstone). By silica they are acidic, intermediate, basic or ultrabasic.
Sedimentary rocks form by weathering, transport, deposition and lithification (compaction and cementation). Clastic rocks are grouped by grain size — rudaceous (conglomerate, breccia), arenaceous (sandstone) and argillaceous (shale, mudstone); non-clastic rocks are chemical (chemical limestone, rock salt) or organic (shell or coral limestone); residual deposits are laterite, bauxite and soil. They are layered and may contain fossils.
Metamorphic rocks form in the solid state when heat, pressure and chemically active fluids recrystallise a pre-existing rock. Thermal (contact) metamorphism turns sandstone into quartzite and limestone into marble; dynamothermal (regional) metamorphism gives schists and gneisses with aligned minerals; cataclastic metamorphism crushes rocks mechanically.
The rock cycle links all three types. Internal heat melts, metamorphoses and uplifts rocks; solar-powered weathering and erosion break them down into sediment, which becomes sedimentary rock. Any rock type can become any other given the right conditions.
Get a ✓ Verified tutor for “Rock Forming Processes” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Three samples from one magma: A has 5 mm crystals all of similar size, B has crystals visible only under a lens, C is black and glassy with a curved (conchoidal) fracture. Where did each cool?
Answer: A — plutonic (deep, slow); B — volcanic (surface, fast); C — volcanic glass such as obsidian (very fast).
A rock has rounded pebbles 1–3 cm across set in sandy cement. Classify it.
Answer: It is a conglomerate — a clastic, rudaceous sedimentary rock.
Trace how a granite could become a gneiss without ever melting, and how it could become sandstone.
Answer: Granite → (heat + directed pressure) → gneiss; granite → weathering, erosion, deposition, lithification → sandstone.
| Rock | Type and origin | Key features |
|---|---|---|
| Granite | Igneous, plutonic, acidic | Coarse, light-coloured: quartz, feldspar, mica |
| Basalt | Igneous, volcanic, basic | Dark, fine-grained; Deccan Traps; may be amygdaloidal |
| Dolerite | Igneous, hypabyssal, basic | Medium-grained; dykes and sills |
| Obsidian | Igneous, volcanic glass | Black glass with conchoidal fracture; no crystals |
| Conglomerate | Sedimentary, rudaceous | Rounded pebbles in a cement |
| Sandstone | Sedimentary, arenaceous | Sand grains cemented by silica, calcite or iron oxide |
| Shale | Sedimentary, argillaceous | Fine clay, splits into thin layers |
| Marble | Metamorphic, thermal (from limestone) | Granulose calcite, fizzes with dilute HCl |
| Quartzite | Metamorphic, thermal (from sandstone) | Very hard; breaks across grains |
| Gneiss | Metamorphic, dynamothermal | Light and dark mineral bands |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 Fill in the blanks: (1) Metamorphic rocks characteristically show … of material. (2) The cycle driven by exogenous and endogenous processes is the …
Answer: (1) recrystallisation. (2) rock cycle.
2. Q.2 MCQ: (1) Sedimentary rocks are mainly formed by … processes. (2) If no crystallisation takes place, … rock is developed.
Answer: (1) (b) exogenous. (2) (b) glassy.
3. Q.3 Give geological terms: (1) rocks classified on the basis of grain size; (2) class of igneous rocks with equigranular texture.
Answer: (1) Clastic (detrital) sedimentary rocks — rudaceous, arenaceous, argillaceous. (2) Plutonic igneous rocks.
4. Q.4 Match: (1) Cataclastic, Thermal, Dynamothermal, Plutonic with Granite, Slate, Quartzite, Mica schist. (2) Rudaceous, Organic deposits, Argillaceous, Chemical deposits with Shell limestone, Conglomerate, Limestone, Mudstone.
Answer: (1) Option 1: A–ii (cataclastic–slate, as the book pairs it), B–iii (thermal–quartzite), C–iv (dynamothermal–mica schist), D–i (plutonic–granite). (2) Option 4: a–ii (rudaceous–conglomerate), b–i (organic–shell limestone), c–iv (argillaceous–mudstone), d–iii (chemical–limestone).
5. Q.5 Strike the odd one out: (1) plutonic, hypabyssal, volcanic, organic deposits. (2) rudaceous, arenaceous, argillaceous, hypabyssal. (3) cataclastic, thermal, dynamothermal, volcanic.
Answer: (1) Organic deposits — the rest are igneous classes by depth. (2) Hypabyssal — the rest are sedimentary grain-size classes. (3) Volcanic — the rest are types of metamorphism.
6. Q.6 (1) Crystallisation of magma is not governed by: temperature and pressure / composition / viscosity / geographic position. (2) Plutonic igneous rocks are: (a) deep, moderate T and P (b) near surface, high T and P (c) deep, high T and P, fast cooling (d) deep, high T and P, slow cooling.
Answer: (1) (d) geographic position of the magma on Earth's surface — it plays no part. (2) Only (d) is correct: plutonic rocks form deep down under high temperature and pressure with slow cooling; (a), (b) and (c) are incorrect statements.
7. Q.7 Distinguish: (1) igneous and metamorphic rocks; (2) volcanic and plutonic igneous rocks; (3) rudaceous and arenaceous rocks; (4) cataclastic and thermal metamorphism.
Answer: (1) Igneous rocks form by cooling of molten magma or lava, are massive with interlocking crystals or glass and may have gas cavities (granite, basalt). Metamorphic rocks form from existing rocks in the solid state by heat, pressure and fluids, are recrystallised and often foliated (schist, gneiss, marble) and contain minerals like garnet and kyanite. (2) Volcanic rocks cool fast at the surface — fine-grained, glassy or porphyritic, often vesicular (basalt, rhyolite). Plutonic rocks cool slowly deep inside — coarse, equigranular, holocrystalline (granite, gabbro). (3) Rudaceous rocks have gravel-size clasts larger than 2 mm (conglomerate, breccia); arenaceous rocks have sand-size grains of 2–0.06 mm (sandstone). (4) Cataclastic metamorphism is caused by directed pressure alone with little heat; it crushes and grinds rock and forms no new minerals (fault breccia, mylonite; book: slate). Thermal metamorphism is caused mainly by heat near a magma body; minerals recrystallise to a granulose texture (quartzite, marble, hornfels).
8. Q.8 True or false with reasons: (1) Hypabyssal rocks contain coarse and fine grained minerals. (2) Sedimentary rocks are layered or stratified. (3) Metamorphic rocks exhibit recrystallisation.
Answer: (1) True — they crystallise at intermediate depth; early crystals grow large while the rest cools faster, giving porphyritic texture (e.g. porphyritic dolerite). (2) True — sediment settles layer by layer in water or air, so most sedimentary rocks show bedding. (3) True — heat, pressure and fluids make old minerals grow into new or larger interlocking crystals in the solid state.
9. Q.9 Short notes: (1) characteristics of igneous rocks; (2) classification of sedimentary rocks; (3) genesis of sedimentary rocks; (4) genesis of metamorphic rocks.
Answer: (1) Formed from magma or lava, so called primary rocks; massive and unstratified; no fossils; may intrude country rock as dykes, sills and veins and bake it at contacts; interlocking crystals or glass; equigranular, porphyritic or glassy texture; lavas may have vesicles and amygdales; made of high-temperature minerals. (2) Residual deposits (laterite, bauxite, soil); transported clastic deposits by grain size — rudaceous (conglomerate, breccia), arenaceous (sandstone), argillaceous (shale, mudstone); deposits from solution — chemical (chemical limestone, rock salt) and organic (shell and coral limestone, coal). (3) Older rocks are weathered; agents such as rivers, wind, glaciers and waves erode and carry the pieces, which are abraded and sorted; they are deposited in layers in basins; burial compacts them and minerals such as silica, calcite or iron oxide cement them (lithification); some form by chemical precipitation or from organic remains. (4) Pre-existing rocks are exposed to new conditions: higher temperature (from depth, intrusions, radioactive decay), pressure (confining or directed) and hot chemically active fluids from magma; their minerals recrystallise in the solid state into new minerals and textures — cataclastic, thermal (contact) or dynamothermal (regional) metamorphism.
10. Q.10 Give geological reasons: (1) Plutonic rocks are usually coarse-grained. (2) Volcanic rocks are fine-grained. (3) No new minerals form in cataclastic metamorphism. (4) New minerals form in dynamothermal metamorphism.
Answer: (1) Deep inside the crust magma loses heat very slowly, so crystals have time to grow large. (2) Lava at the surface loses heat quickly to air or water, so many tiny crystals (or glass) form. (3) Only directed pressure acts, without significant heat or fluids, so the rock is merely crushed and broken — there is no energy for chemical recrystallisation. (4) Both high temperature and directed pressure act, so atoms rearrange into new stable minerals such as garnet, kyanite and biotite, which also line up into schistosity.
11. Q.11 (1) Explain how igneous and metamorphic rocks become sedimentary rocks. (2) Explain the role of endogenic and exogenic processes in converting rock types. (3) Explain how metamorphic rocks become sedimentary rocks.
Answer: (1) and (3) Endogenic forces (mountain building, uplift) bring igneous and metamorphic rocks to the surface. Exposed to air, water and organisms, they weather: frost, heat and roots break them up; hydrolysis, oxidation and solution turn feldspar to clay and dissolve calcite, leaving resistant quartz. Rivers, wind, ice and waves erode and carry the debris, rounding and sorting it, and deposit it in layers in rivers, lakes and seas. Burial compacts the layers and cements bind them, forming conglomerate, sandstone or shale; dissolved matter may precipitate as limestone. (2) Endogenic processes, powered by internal heat, melt rocks into magma (giving igneous rocks), heat and squeeze them (giving metamorphic rocks) and uplift them. Exogenic processes, powered by the Sun through the water cycle and wind, weather, erode, transport and deposit the uplifted rocks to make sedimentary rocks. Burial then hands them back to endogenic processes, so together the two keep the rock cycle running.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Sedimentary rocks are mainly formed by … processes.
Answer: C. Weathering, erosion and deposition are surface processes.
2. If no crystallisation takes place, the rock formed is…
Answer: A. Atoms freeze in place without forming crystals.
3. Equigranular texture is typical of … rocks.
Answer: C. Slow cooling lets all crystals grow large.
4. Lonar lake is an example of a(n) … process.
Answer: D. It is a meteorite impact crater.
5. Which is a hypabyssal rock?
Answer: A. Dolerite forms in dykes and sills.
6. Ultrabasic plutonic rock is…
Answer: A. Dunite is nearly all olivine.
7. Sandstone belongs to the … group.
Answer: A. Sand-sized grains 2–0.06 mm.
8. Shell limestone is a(n) … deposit.
Answer: A. It is made of shells of organisms.
9. Laterite is a … deposit.
Answer: B. It forms in place by deep chemical weathering.
10. Limestone changes to marble by…
Answer: B. Heat recrystallises calcite.
11. Mica-garnet schist results from…
Answer: B. Heat plus directed pressure aligns micas.
12. Mineral changes in metamorphism happen…
Answer: D. Recrystallisation without melting.
13. Crystallisation of magma is NOT governed by…
Answer: D. Location on the map does not control crystallisation.
14. Which is a characteristic metamorphic mineral?
Answer: A. Kyanite forms under metamorphic pressure.
15. Weathering and erosion in the rock cycle are…
Answer: D. They are powered by the Sun through water and wind.
Get a ✓ Verified tutor for “Rock Forming Processes” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Rock Forming Processes the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 35 minutes
Get a ✓ Verified tutor for “Rock Forming Processes” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Rock Forming Processes.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Rock Forming Processes” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.