TalentJR apps
Textbook: Chemistry – Class 12 (Balbharati, official free PDF) · pages 322–339
Your toothbrush bristles (nylon), a non-stick pan (Teflon), a PET water bottle, a car tyre (Buna-S) and the switchboard on your wall (Bakelite) are all polymers — giant molecules built by joining thousands of small units. This chapter explains how polymers are classified (by source, structure, mode of polymerisation, intermolecular forces, number of monomers and biodegradability), the free-radical mechanism of addition polymerisation, how the important commercial polymers are made and used, what degree of polymerisation means and which polymers break down in the environment, with every exercise answered.
A polymer is a very large molecule made by covalently linking many small monomer units; the process is polymerisation. Polymers are natural (starch, cellulose, proteins, natural rubber), synthetic (nylon, PVC, polythene) or semisynthetic (cellulose acetate, viscose rayon); linear, branched or cross-linked; homopolymers or copolymers; biodegradable or not.
Addition (chain-growth) polymerisation joins unsaturated monomers with no by-product, usually by a free-radical chain (initiation, propagation, termination). Condensation (step-growth) polymerisation joins bi- or polyfunctional monomers with loss of small molecules such as H₂O, HCl or CH₃OH. Ring-opening polymerisation (caprolactam → nylon 6) keeps the monomer's composition but grows step by step.
By intermolecular forces: elastomers (weak van der Waals forces, a few cross-links), fibres (hydrogen bonds or strong dipole forces, crystalline, high tensile strength), thermoplastics (intermediate forces; soften on heating, re-mouldable) and thermosetting polymers (heavily cross-linked; set permanently).
Key polymers: natural rubber (cis-polyisoprene; vulcanised with S), LDP and HDP, Teflon, polyacrylonitrile, nylon 6,6 and nylon 6, terylene/PET, Bakelite, melamine–formaldehyde, Buna-S, Buna-N, neoprene, viscose rayon, PMMA, PVC, glyptal, polycarbonate.
Polymer molecular mass is an average; degree of polymerisation (DP) is the number of monomer units per chain, and a minimum (critical) DP is needed for useful properties — lower for hydrogen-bonded polymers. Biodegradable polymers such as PHBV and nylon 2–nylon 6 contain hydrolysable ester or amide links that microbes can break.
Get a ✓ Verified tutor for “Introduction to Polymer Chemistry” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Natural rubber has an average molar mass of 238 000 u. Estimate its degree of polymerisation (isoprene C₅H₈).
Answer: About 3500 isoprene units per chain (within the 2000–5000 range for natural rubber).
Nylon 6,6 has an average molar mass of 22 600 u. How many repeating units –[CO(CH₂)₄CONH(CH₂)₆NH]– does an average chain contain? (C 12, H 1, N 14, O 16)
Answer: About 100 repeating units (200 monomer molecules: 100 of each).
Explain why the critical degree of polymerisation is lower for nylon 6 than for polythene.
Answer: Hydrogen bonding in nylon 6 gives useful strength at a smaller DP than polythene needs.
Write the repeating units of natural rubber, neoprene and Buna-S, and name the monomers.
Answer: 1,4-addition of a diene leaves one C=C in each diene-derived unit.
Write the equations for making (a) nylon 6,6 and (b) terylene, and name the small molecule lost.
Answer: Water is eliminated in both: amide links in nylon 6,6, ester links in terylene.
| Polymer | Monomer(s) / type | Uses |
|---|---|---|
| LDP / HDP | ethene; addition (radical / Ziegler–Natta) | films, cable insulation / buckets, pipes |
| PVC | CH₂=CHCl; addition | pipes, raincoats, flooring |
| Teflon | CF₂=CF₂; addition | non-stick pans, gaskets |
| PAN (Orlon) | CH₂=CHCN; addition | wool substitute |
| Natural rubber | isoprene; addition (cis) | tyres after vulcanisation |
| Buna-S | butadiene + styrene; addition copolymer | tyres |
| Neoprene | chloroprene; addition | petrol hoses, gaskets |
| Nylon 6,6 | adipic acid + hexamethylenediamine; condensation | bristles, fabrics, sutures |
| Nylon 6 | ε-caprolactam; ring opening | tyre cords, ropes |
| Terylene / PET | ethylene glycol + terephthalic acid; condensation | fabrics, bottles |
| Bakelite | phenol + HCHO; condensation, cross-linked | switches, handles |
| PHBV | 3-hydroxybutanoic + 3-hydroxypentanoic acids | biodegradable packaging |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q1. Choose the correct option. (i) Nylon fibres are? (ii) Naturally occurring polymer: Teflon, polyethylene, PVC, protein? (iii) Silk is a kind of … fibre. (iv) Dacron is another name of? (v) Which is made of polyamides: Dacron, rayon, nylon, jute?
Answer: (i) B. Polyamide fibres (ii) D. Protein (iii) C. Animal (iv) D. Terylene (v) C. Nylon
2. Q1 (contd). (vi) Number of carbon atoms in the ring of ε-caprolactam? (vii) Terylene is? (viii) PET is formed by? (ix) Chemically pure cotton is? (x) Teflon is chemically inert due to?
Answer: (vi) D. Six (vii) B. Polyester fibre (viii) B. Condensation (ix) D. Cellulose (x) B. C–F bond
3. Q2. (i) Identify A and B: a. HOCH₂CH₂OH + HOOC–C₆H₄–COOH (533 K) → A b. H₂N(CH₂)₆NH₂ + HOOC(CH₂)₄COOH (N₂, 533 K) → B. (ii) Complete: a. Caprolactam is used to prepare … b. Novolac is a copolymer of … and … c. Terylene is a … polymer d. Benzoyl peroxide in addition polymerisation acts as … e. Polythene consists of polymerised …
Answer: (i) A terylene, B nylon 6,6 (ii) nylon 6; phenol, formaldehyde; condensation; initiator; ethene
4. Q2 (contd). (iii) Flow chart: classification by type of polymerisation. (iv) Examples of addition and condensation polymers. (v) Chain-growth polymers. (vi) Define monomer, vulcanisation, synthetic fibres. (vii) Which intermolecular force leads to a high-density polymer? (viii) One copolymer and one homopolymer. (ix) Thermoplastic or thermosetting: PET, urea–formaldehyde resin, polythene, phenol–formaldehyde.
Answer: (ix) Thermoplastic: PET, polythene; thermosetting: urea–formaldehyde, phenol–formaldehyde
5. Q2 (contd). (vi) Match: 1 Teflon 2 PVC 3 Polyester 4 Polythene 5 Bakelite with a CH₂=CH₂, b CF₂=CF₂, c CH₂=CHCl, d C₆H₅OH + HCHO, e dicarboxylic acid + glycol. (vii) Structures of polymers from 1. adipic acid + hexamethylenediamine 2. ε-aminocaproic acid + glycine. (viii) Repeating unit of natural rubber. (ix) Natural or synthetic: cellulose, polystyrene, terylene, starch, protein, silicones, Orlon, phenol–formaldehyde resins.
Answer: (vi) 1-b, 2-c, 3-e, 4-a, 5-d
6. Q2 (contd). (x) What are synthetic resins? Natural and synthetic examples. (xi) Distinguish thermosetting and thermoplastic resins. (xii) Raw materials of Bakelite.
Answer: (xii) Phenol (C₆H₅OH) and formaldehyde (HCHO)
7. Q3. (i) Classes by intermolecular forces and their structures. (ii) Reactions for nylon 6 and terylene. (iii) Structures of natural rubber and neoprene and their monomers. (iv) Polymer type with –CO–O– linkage. (v) Structural formulae of SBR, Buna-N and neoprene.
Answer: (iv) Polyester
8. Q4. (i) Condensation or addition: a. –(CH₂–CH(C₆H₅))ₙ– b. –(CH₂–CH=CH–CH₂)ₙ– c. –(CO(CH₂)₄CONH(CH₂)₆NH)ₙ– d. –(OCH₂CH₂O–CO–C₆H₄–CO)ₙ–. (ii) Reactions for nylon 6,6. (iii) Vulcanisation; agents for neoprene and Buna-N. (iv) Formation of Teflon and Bakelite.
Answer: (i) Addition: a, b; condensation: c, d
9. Q4 (contd). (v) LDP and HDP. (vi) Preparation, properties and uses of Teflon. (vii) Straight, branched or cross-linked: a. –(CH₂–CH(CN))ₙ– b. –(CH₂–CH₂–CH(C₂H₅)–CH₂–CH₂)ₙ– c. Bakelite.
Answer: (vii) a straight chain, b branched, c cross-linked
10. Q5. (i) Manufacture, properties and uses of polythene. (ii) Is synthetic rubber better than natural rubber? (iii) Specialities of Buna-S and neoprene. (iv) Structure of isoprene and its polymer. (v) Free-radical mechanism of addition polymerisation.
Answer: (iv) Isoprene → cis-polyisoprene
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Which is a semisynthetic polymer?
Answer: D. Regenerated cellulose.
2. In addition polymerisation…
Answer: D. No atoms are lost.
3. Terylene is formed by…
Answer: B. Ester links with loss of water.
4. The monomer of nylon 6 is…
Answer: D. Ring-opening polymerisation.
5. Natural rubber is…
Answer: C. cis configuration at each C=C.
6. Vulcanised rubber contains cross-links of…
Answer: A. Sulfur bridges join chains.
7. HDP is made using…
Answer: B. Et₃Al + TiCl₄ at 333–343 K, 6–7 atm.
8. Which is a thermosetting polymer?
Answer: D. Heavily cross-linked.
9. Buna-N is a copolymer of butadiene and…
Answer: C. N for nitrile.
10. Neoprene's monomer is…
Answer: C. 2-Chlorobuta-1,3-diene.
11. The polymer used for non-stick cookware is…
Answer: D. PTFE.
12. Orlon is…
Answer: B. Wool substitute.
13. Which is biodegradable?
Answer: A. Aliphatic polyester.
14. Fibres have high tensile strength because of…
Answer: C. Strong interchain forces.
15. The number of carbon atoms in the ring of ε-caprolactam is…
Answer: D. Seven-membered ring = six C + one N.
Get a ✓ Verified tutor for “Introduction to Polymer Chemistry” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Introduction to Polymer Chemistry the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 70 minutes
Get a ✓ Verified tutor for “Introduction to Polymer Chemistry” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Introduction to Polymer Chemistry.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Introduction to Polymer Chemistry” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.