TalentJR apps
Textbook: Chemistry – Class 12 (Balbharati, official free PDF) · pages 90–119
A phone battery, the starter battery of a car, chrome-plated taps and the hydrogen fuel cells of spacecraft all run on the same chemistry: electrons moving in redox reactions. This chapter explains how electrolyte solutions conduct (conductivity, molar conductivity, Kohlrausch's law), how electrolytic cells use electricity to drive reactions (Faraday's laws), and how galvanic cells turn reactions into electricity (electrode potentials, Nernst equation, ΔG° = −nFE°, the electrochemical series). It closes with dry cells, lead accumulators, NICAD cells and fuel cells. Every exercise numerical is worked out below.
Electrolytic conductance depends on the ions present. Conductivity κ = 1/ρ = (cell constant)/R; molar conductivity Λ = 1000κ/c with κ in S cm⁻¹ and c in mol L⁻¹, giving S cm² mol⁻¹. On dilution κ falls but Λ rises.
Strong electrolytes follow Λ = Λ₀ − A√c, so Λ₀ is found by extrapolation; for weak electrolytes Λ₀ comes from Kohlrausch's law of independent migration, Λ₀ = ν₊λ₀₊ + ν₋λ₀₋, and α = Λ/Λ₀.
Electrolytic cells use electrical energy for non-spontaneous reactions: molten NaCl gives Na and Cl₂, aqueous NaCl gives H₂, Cl₂ and NaOH. Faraday's law: Q = It, moles of electrons = Q/F (F = 96 500 C mol⁻¹), and mass deposited follows from the half-reaction.
Galvanic cells convert the free energy of a spontaneous redox reaction into electricity. E_cell = E_cathode − E_anode (reduction potentials, measured against the standard hydrogen electrode). ΔG = −nFE_cell, ΔG° = −nFE°, and E° = (0.0592/n) log K at 298 K.
Nernst equation: E = E° − (0.0592/n) log Q at 298 K. Commercial cells: Leclanché dry cell (Zn anode, graphite/MnO₂ cathode), lead accumulator (Pb anode, PbO₂ cathode, H₂SO₄), NICAD (Cd anode, NiO₂ cathode) and the H₂–O₂ fuel cell (1.23 V, product water).
Get a ✓ Verified tutor for “Electrochemistry” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A conductivity cell with cell constant 1.25 cm⁻¹ shows a resistance of 520 Ω when filled with 0.020 M KCl. Find κ and Λ.
Answer: κ = 2.40 × 10⁻³ S cm⁻¹; Λ = 120 S cm² mol⁻¹
Λ₀ values (S cm² mol⁻¹): HCl 426.2, CH₃COONa 91.0, NaCl 126.5. If 0.001 M acetic acid has Λ = 48.1 S cm² mol⁻¹, find Λ₀ and α.
Answer: Λ₀ = 390.7 S cm² mol⁻¹; α ≈ 0.123
A current of 5.0 A is passed for 2.0 h through molten Al₂O₃ in cryolite. What mass of aluminium is produced?
Answer: ≈ 3.36 g Al
Find E for Zn | Zn²⁺(0.010 M) ‖ Cu²⁺(1.0 M) | Cu at 298 K (E° = 1.10 V) and the equilibrium constant of the reaction.
Answer: E ≈ 1.16 V; K ≈ 10³⁷
| Quantity | Formula | Note |
|---|---|---|
| Conductivity | κ = b/R = (1/R)(l/a) | S cm⁻¹; b = cell constant |
| Molar conductivity | Λ = 1000κ/c | S cm² mol⁻¹, c in mol L⁻¹ |
| Kohlrausch (strong) | Λ = Λ₀ − A√c | extrapolate to c = 0 |
| Independent migration | Λ₀ = ν₊λ₀₊ + ν₋λ₀₋ | α = Λ/Λ₀ for weak electrolytes |
| Faraday | Q = It; n(e⁻) = Q/F | F = 96 500 C mol⁻¹ |
| Cell emf | E°cell = E°cathode − E°anode | reduction potentials |
| Gibbs energy | ΔG = −nFE; ΔG° = −nFE° | E intensive, ΔG extensive |
| Equilibrium constant | E° = (0.0592/n) log K | 298 K |
| Nernst equation | E = E° − (0.0592/n) log Q | 298 K |
Solve each one in your notebook first. Then open the solution and compare every step.
1. 1. Choose the correct option. (i) Concentration ratio 0.4, conductivity ratio 0.216; ratio of molar conductivities: 0.54 / 11.574 / 0.0864 / 1.852. (ii) On dilution. (iii) 1 S m² mol⁻¹ equals. (iv) E° for H₂ + Cu²⁺ → 2H⁺ + Cu (E°Cu = 0.34 V). (v) For Pb | Pb²⁺ ‖ Ag⁺ | Ag, an ion in the anode compartment is raised tenfold; emf changes by.
Answer: (i) a. 0.54 (ii) c (iii) b. 10⁴ Ω⁻¹ cm² mol⁻¹ (iv) b. 0.34 V (v) d. decrease by 0.0296 V
2. 1. (vi) Ag⁺/Ag 0.8, I₂/I⁻ 0.53, Pb²⁺/Pb −0.13, Fe²⁺/Fe −0.44 V: strongest oxidising and reducing agents. (vii) Ni + Cu²⁺ → Ni²⁺ + Cu, E° = 0.57 V; ΔG°. (viii) Not correct: G extensive / E intensive / electrical work = −ΔG / multiplying a half-reaction multiplies E°. (ix) Oxidation in lead battery on discharge. (x) Λ₀ of Al₂(SO₄)₃.
Answer: (vi) b. Ag⁺ and Fe (vii) b. −110 kJ (viii) d (ix) c (x) b
3. 2. One or two sentences: (i) Cell constant. (ii) Relation between κ and Λ; unit of Λ. (iii) Electrode reactions in electrolysis of molten KCl. (iv) Two functions of a salt bridge. (v) E° for 2Al + 3Ni²⁺ → 2Al³⁺ + 3Ni (E°Ni −0.25, E°Al −1.66 V). (vi) Nernst equation and the correction term. (vii) Standard cell potential conditions. (viii) Formulate a cell from Au³⁺ + 3e⁻ → Au and Mg → Mg²⁺ + 2e⁻. (ix) Electrons with total charge 1 C. (x) Single and double vertical lines.
Answer: E° = 1.41 V; 6.24 × 10¹⁸ electrons
4. 3. (i) Effect of dilution on conductivity. (ii) Salt bridge. (iii) Electrode reactions for electrolysis of aqueous NaCl. (iv) Moles of electrons when 0.8 A passes for 1 h through molten CaCl₂. (v) Galvanic cell from Co³⁺|Co (1.82 V) and Mn²⁺|Mn (−1.18 V); E°cell.
Answer: (iv) 0.0298 mol e⁻ (v) E°cell = 3.00 V
5. 3. (vi) Show from ΔG° and E° that potential is intensive. (viii) Derive E° and K relation. (ix) Single electrode potential cannot be measured. (x) Why the potential of a lead accumulator falls in use and how to raise it. (xi) NICAD electrode and net reactions.
Answer: E° = (0.0592/n) log K; E is intensive
6. 4. (i) Kohlrausch's law and its use for Λ₀ of a weak electrolyte. (ii) Electrolysis of molten NaCl. (iii) Current needed to produce 2.4 g Cu from CuSO₄ in 1 h (M = 63.5). (Book: 2.03 A.)
Answer: (iii) 2.03 A
7. 4. (iv) K of 2Cu⁺(aq) → Cu²⁺(aq) + Cu(s) is 1.2 × 10⁶; find E°. (Book: 0.36 V.) (v) emf of Zn | Zn²⁺(0.2 M) ‖ H⁺(1.6 M) | H₂(1.8 atm) | Pt at 25 °C. (Book: 0.785 V.) (vi) emf of Zn | Zn²⁺(0.08 M) ‖ Cr³⁺(0.1 M) | Cr; E°Zn −0.76, E°Cr −0.74 V. (Book: 0.0327 V.)
Answer: (iv) 0.36 V (v) 0.785 V (vi) 0.0327 V
8. 4. (vii) Cell constant: units and experimental determination. (viii) Moles of electrons and mass of product from reaction stoichiometry. (ix) Lead storage cell reactions on discharge and recharge. (x) H₂–O₂ fuel cell. (xi) Leclanché dry cell.
Answer: See reactions above
9. 4. (xii) Oxidising agents in increasing strength: Al (−1.66), Al³⁺ (−1.66), Cl₂ (1.36), Cd²⁺ (−0.4), Fe (−0.44), I₂ (0.54), Br₂ (1.09 V). (xiii) Reducing agents in increasing strength: K (−2.93), Br₂ (1.09), Mg (−2.36), Ce³⁺ (1.61), Ti²⁺ (−0.37), Ag⁺ (0.8), Ni (−0.23 V). (xiv) Spontaneous? a. Ca + Cd²⁺ → Ca²⁺ + Cd; b. 2Br⁻ + Sn²⁺ → Br₂ + Sn; c. 2Ag + Ni²⁺ → 2Ag⁺ + Ni (Table 5.1).
Answer: (xii) Al³⁺ < Cd²⁺ < I₂ < Br₂ < Cl₂ (xiii) Ce³⁺ < Ni < Ti²⁺ < Mg < K (xiv) a yes, b no, c no
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. On dilution of an electrolyte solution…
Answer: A. Fewer ions per cm³ but freer ions.
2. Unit of cell constant is…
Answer: D. l/a has units cm/cm².
3. Λ₀ of a weak electrolyte is found using…
Answer: B. Combine Λ₀ of strong electrolytes.
4. Charge needed to deposit 1 mol Cu from Cu²⁺ is…
Answer: A. Cu²⁺ + 2e⁻ → Cu.
5. In a galvanic cell the anode is…
Answer: B. Electrons leave from the anode.
6. SHE is assigned a potential of…
Answer: D. It is the reference.
7. E°cell of Zn | Zn²⁺ ‖ Ag⁺ | Ag (E° Zn −0.76, Ag +0.80 V) is…
Answer: D. 0.80 − (−0.76).
8. If E°cell is positive, ΔG° is…
Answer: D. ΔG° = −nFE°.
9. ΔG° for n = 2, E° = 0.50 V is…
Answer: C. −2 × 96 500 × 0.50 J.
10. Which is the strongest reducing agent?
Answer: B. Most negative E° (−3.05 V).
11. The Nernst factor 0.0592 applies at…
Answer: A. 2.303RT/F at 298 K.
12. Electrolyte in a lead accumulator is…
Answer: D. Its density falls on discharge.
13. Anode of NICAD cell is…
Answer: A. Cd → Cd(OH)₂.
14. E° of the H₂–O₂ fuel cell is…
Answer: A. 0.40 − (−0.83).
15. Which metal can displace Cu from CuSO₄ solution?
Answer: A. Zn has lower E° than Cu.
Get a ✓ Verified tutor for “Electrochemistry” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Electrochemistry the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 100 minutes
Get a ✓ Verified tutor for “Electrochemistry” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Electrochemistry.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Electrochemistry” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.