TalentJR apps
Textbook: Food Science and Technology – Class 12 (Balbharati, official free PDF) · pages 2–10
Why does milk form a skin when you boil it, why does lemon juice turn hot milk into paneer, and how does a packet of milk stay safe for two days in the fridge? This chapter covers what milk is made of, how heat, acid and enzymes change it, the processing steps in a dairy (pasteurisation, homogenisation, sterilisation, concentration, drying) and how curd, chakka, cheese, paneer, buttermilk, khoa, cream, butter and milk powder are made — with every exercise answered and a few errors in the book corrected.
Milk is the fluid made by the mammary glands of mammals to feed their young. Cow and buffalo give most of India's milk, and India has been the world's largest milk producer for over two decades (about 239 million tonnes in 2023–24). Milk is called a near-complete food because it supplies good-quality protein, fat, lactose, calcium, phosphorus and riboflavin — though it is poor in iron and vitamin C.
Milk is about 81–88 % water. The rest is protein (3–4 %, of which about 80 % is casein and 20 % whey proteins), fat (about 3.5–4 % in cow milk, 6.5 % in buffalo milk) dispersed as an oil-in-water emulsion, lactose (4–5 %), minerals that act as buffers at pH 6.6, and vitamins. Total solids minus fat are called solids-not-fat (SNF).
Heat kills microbes, denatures whey proteins, forms a skin (malai) and gives a cooked flavour; acid brings casein to its isoelectric point (pH 4.6) so it curdles, which is how paneer and chhena are made; the enzyme rennet (chymosin) clots casein into a gel, the first step in most cheese.
Dairy processing makes milk safe and longer-lasting: pasteurisation (holding 63 °C/30 min, HTST 72 °C/15 s, UHT about 135–140 °C for 2–4 s), homogenisation, sterilisation, concentration (condensed milk), skimming and drying (drum and spray drying).
Milk products include curd (lactic fermentation), chakka and shrikhand, cheese, paneer, buttermilk, khoa, cream, butter (at least 80 % fat) and milk powder (2–4 % moisture). Each is made by removing water, fat or whey, or by fermenting, so it keeps longer and adds variety.
Get a ✓ Verified tutor for “Milk and Milk Products” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Using the composition of cow milk (per 100 ml: protein 3.2 g, fat 4.1 g, lactose 4.4 g), estimate its energy and check that the label value of about 67 kcal makes sense.
Answer: About 67 kcal per 100 ml — fat supplies more than half the energy, which is why skimmed milk (fat ≤ 0.5 %) gives only about 35 kcal per 100 ml.
A dairy wants to sell milk to villages without refrigerators, and also packet milk for city homes with fridges. Which heat treatment suits each, and why?
Answer: Villages: UHT (about 138 °C for 2–4 s) with aseptic Tetra-type cartons — keeps for months unopened at room temperature. Cities: HTST pasteurisation (72 °C for 15 s), cooled and kept at 4 °C — cheaper and tastes closest to fresh milk, but lasts only a couple of days.
A halwai boils 10 litres of buffalo milk to make khoa. Taking the density of milk as about 1.03 kg/litre and the yield as 22 %, how much khoa will he get, and roughly how much water has he evaporated?
Answer: About 2.3 kg of khoa, after boiling off about 8 kg of water — which explains why khoa sweets cost much more per kg than milk and why the work takes so long.
| Process | Conditions | What it achieves |
|---|---|---|
| Holding (LTLT) pasteurisation | 62.8–63 °C for 30 min | Small batches; kills pathogens |
| HTST pasteurisation | 71.7–72 °C for 15 s | Packet milk; least flavour change; needs 4 °C storage |
| UHT treatment | 135–140 °C for 2–4 s + aseptic pack | Keeps months unopened without a fridge |
| Sterilisation | 110–120 °C for 15–20 min in bottle, or very high temperature for seconds | Destroys all microbes and spores |
| Homogenisation | High pressure through a narrow valve | Fat globules under 2 µm; no cream line |
| Skimming | Centrifugal cream separator | Skimmed milk ≤ 0.5 % fat; cream as by-product |
| Concentration | Evaporation under vacuum at 55–63 °C | Condensed and evaporated milk |
| Spray drying | Fine spray into hot air, seconds | Milk powder with 2–4 % moisture |
| Drum drying | Thin film on heated rotating drums | Cheaper powder, poorer solubility |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 (a) Choose the right option: (i) ___ is the whey protein (lactalbumin, rennin, casein, gluten). (ii) Sugar present in milk is ___ (sucrose, lactose, maltose, fructose). (iii) Keeping quality of milk is increased by ___ (pasteurisation, homogenisation, skimming, churning). (iv) Homogenisation reduces the size of ___ globules (carbohydrate, lactose, fat, proteins). (v) Lactose is converted into lactic acid during ___ making (curd, khoa, cream, basundi).
Answer: (i) Lactalbumin. (ii) Lactose. (iii) Pasteurisation. (iv) Fat. (v) Curd.
2. Q.1 (b) Match: UHT, HTST, sterilisation, holding method — with 71.7 °C, 62.8 °C, 137.8 °C, 148.8 °C, 100 °C.
Answer: UHT — 137.8 °C; HTST — 71.7 °C; sterilisation — 148.8 °C; holding method — 62.8 °C. (100 °C is extra.)
3. Q.1 (c) (i) True or false: (a) Milk is a water-in-oil emulsion. (b) The fat content of butter is generally 50 %. (c) Camel milk is called the yellow gold of the desert. (ii) Odd one out: butter, ghee, milk powder, meat. (iii) Name the main carbohydrate in milk. (d) Unscramble: NACESI is the milk protein.
Answer: (i) (a) False — milk is an oil-in-water emulsion. (b) False — butter has about 80 % fat (FSSAI minimum). (c) False — it is the 'white gold of the desert'. (ii) Meat (the others are milk products). (iii) Lactose. (d) CASEIN.
4. Q.2 (i) Define: (a) homogenisation (b) skimming of milk (c) pasteurisation.
Answer: (a) Homogenisation: forcing warm milk at high pressure through a narrow valve so that fat globules are broken into tiny ones (under 2 µm) that stay evenly spread and do not form a cream layer. (b) Skimming: removing fat from milk by centrifugal separation, giving cream and skimmed milk with not more than 0.5 % fat. (c) Pasteurisation: heating milk to a fixed temperature for a fixed time (e.g. 72 °C for 15 s) to destroy all pathogenic microbes and most enzymes and so improve keeping quality, without boiling.
5. Q.2 (ii) Short notes: (a) drying (b) butter (c) curd.
Answer: (a) Drying removes water from whole or skimmed milk to 2–4 % moisture so microbes cannot grow. Drum drying spreads milk on steam-heated rotating drums and scrapes off the film; spray drying sprays concentrated milk into hot air (about 180–200 °C) and gives a fine, easily soluble powder. Products: whole and skimmed milk powder, infant formula, dairy whitener, malted milk. (b) Butter: cream (30–40 % fat) is pasteurised, cooled, ripened with lactic culture if desired and churned; fat granules separate from buttermilk, are washed, salted and worked. It must contain at least 80 % milk fat and is a water-in-oil emulsion. (c) Curd: boiled milk is cooled to 35–40 °C and inoculated with a little old curd; lactic acid bacteria convert lactose to lactic acid, casein coagulates and a firm smooth curd forms in 6–12 h. It is probiotic, easier to digest than milk, and used for lassi, kadhi, raita and buttermilk.
6. Q.2 (iii) (a) List milk products used in our diet. (b) List the processing methods of milk.
Answer: (a) Fluid milks (whole, toned, skimmed, flavoured, condensed); fat-rich products (cream, butter, ghee); heat/acid-coagulated products (khoa, paneer, chhena); fermented products (curd, yogurt, lassi, buttermilk, chakka, shrikhand, cheese); frozen products (ice cream, kulfi); dried products (milk powders, whitener); by-products (casein, whey, lactose). (b) Chilling, clarification/filtration, standardisation, pasteurisation (holding, HTST, UHT), homogenisation, sterilisation, concentration/condensing, skimming (centrifugal separation) and drying (drum and spray).
7. Q.3 (i) Discuss in detail the composition of milk.
Answer: Water 81–88 % — the medium in which other constituents are dissolved or dispersed. Protein 3–4 % — casein (about 80 %, a phosphoprotein present as calcium caseinate at pH 6.6, precipitated by acid or rennet) and whey proteins (about 20 %, lactalbumin and lactoglobulin, denatured by heat). Fat 3.5–4.5 % in cow and about 6.5 % in buffalo milk — an oil-in-water emulsion of globules; gives flavour, carries vitamins A and D, decides price; cow milk fat is yellow from carotene. Carbohydrate 4–5 % — lactose (glucose + galactose), unique to milk, gives mild sweetness and browns on heating. Minerals about 0.7 % — calcium, phosphorus, potassium, sodium, iodine; act as buffers; iron is poor. Vitamins — rich in riboflavin (light-sensitive) and vitamin A; low in vitamin C and niacin; vitamin D added by fortification. Comparison per 100 ml: buffalo milk has more fat (6.5 g), protein (4.3 g) and energy (about 117 kcal) than cow milk (4.1 g, 3.2 g, 67 kcal); human milk has less protein (1.1 g) and more lactose (7.4 g), suited to the baby's kidneys and brain growth.
8. Q.3 (ii) Explain the process of homogenisation of milk.
Answer: Purpose: in raw milk, fat globules of 1–20 µm are lighter than water and rise to form a cream layer. Process: milk is pre-heated to about 55–65 °C (fat must be liquid) and pumped by a high-pressure piston pump at about 100–250 bar through a very narrow homogenising valve. Turbulence and sudden pressure drop shatter the globules to under 2 µm; their total surface area increases many times and new membranes of casein and whey protein cover them. Result: no cream line, whiter colour, fuller body, blander flavour, better digestibility; in ice cream, a smoother texture. Homogenisation is usually done just before or with pasteurisation, because homogenised raw milk turns rancid quickly (lipase acts on the large new fat surface).
9. Project: (i) Visit a dairy plant and report on tests on milk, processes, products, packaging and storage. (ii) Collect information on types of milk and milk products in a supermarket and make a booklet. (iii) Make charts on milk and milk products.
Answer: (i) Report headings: platform tests (organoleptic smell/taste, temperature, clot-on-boiling, alcohol test, lactometer for density, fat by Gerber method, SNF, adulterant tests such as starch or urea); processes (chilling, clarification, standardisation, homogenisation, HTST pasteurisation, cooling); products (packet milk, curd, paneer, butter, ghee, ice cream, powder); packaging (LDPE pouches, aseptic cartons, cups, tins) and cold storage at 4 °C. (ii) Booklet: one page each for full cream, standardised, toned, double toned, skimmed, UHT and flavoured milk, with fat and SNF from the label, price per litre and shelf life; then products with FSSAI licence numbers. (iii) Charts: composition table of cow, buffalo and human milk; a tree of milk products grouped as fluid, fat-rich, coagulated, fermented, frozen and dried.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Which of these is a whey protein?
Answer: C. Rennin is an enzyme, casein is curd protein, gluten is a wheat protein.
2. The sugar present in milk is…
Answer: A. Lactose is found naturally only in milk.
3. Keeping quality of milk is increased mainly by…
Answer: A. It kills microbes and inactivates enzymes.
4. Homogenisation reduces the size of ___ globules.
Answer: D. Fat exists as globules; protein and lactose do not.
5. Lactose is converted to lactic acid while making…
Answer: A. Lactic acid bacteria ferment lactose in curd.
6. HTST pasteurisation uses…
Answer: D. The other two numeric options are holding and UHT.
7. Milk is best described as…
Answer: C. Fat droplets are dispersed in water.
8. Casein precipitates at about pH…
Answer: D. 4.6 is its isoelectric point; 6.6 is normal milk pH.
9. Chymosin (rennin) is obtained from a calf's…
Answer: A. The book's 'intestine' is a slip.
10. Which enzyme from pineapple can clot milk?
Answer: D. Papain is from papaya.
11. The maximum fat allowed in FSSAI skimmed milk is…
Answer: C. 1.5 % is double toned and 3.0 % is toned milk.
12. Butter must contain at least ___ milk fat.
Answer: B. 99.5 % is ghee; 25 % is low-fat cream.
13. Which drying method gives the most soluble milk powder?
Answer: A. Droplets dry in seconds with little heat damage.
14. Camel milk is called…
Answer: D. Promoted by NRC on Camel, Bikaner.
15. Which is the odd one out?
Answer: B. The rest are milk products.
Get a ✓ Verified tutor for “Milk and Milk Products” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Milk and Milk Products the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 45 minutes
Get a ✓ Verified tutor for “Milk and Milk Products” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Milk and Milk Products.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Milk and Milk Products” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.