TalentJR apps
Textbook: Food Science and Technology – Class 12 (Balbharati, official free PDF) · pages 46–52
A caramel, a toffee and a lemon drop can be made from almost the same sugar — so why is one chewy, one hard and one glassy? This chapter explains sugar and flour confectionery, the main kinds of sugar sweets (caramels, toffees, fudge, hard candy, taffy, jellies, fondants, chocolate and Indian mithai), the ingredients used and the general manufacturing process, including inversion and the sugar-boiling stages — with every exercise answered and the book's nutrition and storage claims corrected.
Confectionery (confections) means sweet foods rich in sugar. Sugar confectionery is based mainly on sugar with flavours and additives (candy, toffee, chocolate, mithai); flour confectionery is based on sweetened flour (cakes, biscuits, pastries — covered in Chapter 4). India's per-capita confectionery consumption was about 2.3 kg in 2019.
Caramels (sugar + glucose syrup + milk solids, 118–132 °C), toffees (less milk and fat, boiled higher, harder), fudge (boiled to about 116 °C and allowed to crystallise into a short grain), hard candy (sugar + glucose boiled to the hard-crack stage, under 2 % moisture), taffy or chews (pulled and folded to trap air), gelatinised sweets (set by starch, gelatin or pectin), fondants and creams (fine-crystal sugar pastes), chocolate, and Indian mithai are the main sugar confections.
Browning in caramel and toffee comes from caramelisation (heating sugar alone) and the Maillard reaction (sugar + amino acids from milk protein).
Ingredients: sweeteners (cane sugar, invert sugar, glucose/corn syrup, honey, intense sweeteners and polyols), milk products, water, salt, confectionery fats, stabilisers, gelling agents (gelatin, pectin, gums, agar), colours and flavours.
Every sweet is made the same way — balance the recipe, prepare and mix ingredients, boil to the right temperature, then cool, shape and pack. The degree of sucrose inversion, the boiling time and temperature, the residual moisture and the other ingredients decide texture and keeping quality.
Get a ✓ Verified tutor for “Confectionery Technology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A student boiled caramel mixture to 129 °C instead of 119 °C. What texture will result and why?
Answer: A hard caramel instead of a soft one — the syrup lost more water, so the final sweet is firmer and less chewy. Temperature is the confectioner's measure of how much water is left.
100 g sucrose is fully inverted with a little acid. How much invert sugar is formed, and why is the mass larger?
Answer: About 105 g of invert sugar. The extra 5 g comes from the water that joins the molecule when it splits — hydrolysis adds water.
| Product | How it is made | Texture / key point |
|---|---|---|
| Soft caramel | Sugar + glucose + milk solids to 118–120 °C | Chewy, does not crystallise |
| Hard caramel | Same mix to 128–132 °C | Firmer chew |
| Toffee | Sugar/jaggery + less butter and milk, to about 150 °C | Hard, brittle, low moisture |
| Fudge | Milk + butter + sugar to about 116 °C, then crystallised | Short, fine grain |
| Hard candy | Sugar + glucose to 149–166 °C | Glassy, under 2 % moisture |
| Taffy / chews | Sticky boiled mass pulled and folded at about 50 °C | Soft, light, opaque |
| Jellies, gums, marshmallow | Sugar + glucose + gelatin, pectin or starch | Texture set by the gel; risk of syneresis |
| Fondant | Syrup to 116–121 °C, cooled and beaten | Very fine crystals; creamy |
| Chocolate | Cocoa mass + cocoa butter + sugar (± milk) | Melts in the mouth; store at 15–18 °C |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 (a) Choose the correct option: (i) per-capita confectionery consumption is about ___ kg (ii) fudge is made by boiling milk and sugar at about ___ (iii) lemon drops come under ___ confectionery (iv) invert sugar is prepared by ___ process (v) ___ is a natural gelling agent present in fruits.
Answer: (i) 2.3 kg. (ii) 116 °C. (iii) Hard boiled (candy). (iv) Inversion. (v) Pectin.
2. Q.1 (b) Match: soft caramel, hard candy, saccharin, flour confection, corn syrup — with cake, other sweetener, starch of corn, 118–120 °C, 149–166 °C, toffee.
Answer: Soft caramel — 118–120 °C; hard candy — 149–166 °C; saccharin — other sweetener; flour confection — cake; corn syrup — starch of corn. (Toffee is extra.)
3. Q.1 (c) (i) Odd word: gelatin, pectin, egg, agar-agar. (ii) Complete the word — I am a confectionery product (_ O N _ _ _ _). (iii) Unscramble 'gefdu' — I am a sugar confectionery.
Answer: (i) Egg — the others are gelling agents. (ii) FONDANT. (iii) FUDGE.
4. Q.2 (i) What are gelatinised sweets? (ii) Define syneresis.
Answer: (i) Gelatinised sweets are confections whose texture is set by a gelling agent rather than by sugar crystals. Sugar and glucose syrup are combined with starch, gelatin or pectin, heated and set in moulds — gums, jellies, jelly beans and marshmallows, ranging from firm gums to soft jellies. (ii) Syneresis is the oozing ('weeping') of liquid or syrup out of a gel during storage; it is a defect in jellies and gums caused by excess acid, insufficient pectin or other gelling agent, or poor storage.
5. Q.3 Short notes: (i) sweeteners (ii) caramel, toffee and fudge (iii) degree of inversion.
Answer: (i) Sweeteners: sucrose (cane sugar — granulated, fine, icing, syrup) is the main one; invert sugar (sucrose split by acid or invertase into glucose + fructose; prevents crystallisation, keeps sweets soft); corn/glucose syrup (from maize starch; controls graining, softens, adds body); honey (natural invert sugar; flavour and moisture, but not low-calorie); high-intensity sweeteners (saccharin, aspartame, sucralose) and polyols (sorbitol, mannitol) for sugar-free products. (ii) All three combine sugar with milk solids and fat; colour and flavour come from caramelisation and the Maillard reaction. Caramel: sucrose + glucose syrup + milk solids, non-crystalline and chewy; soft 118–120 °C, medium 121–124 °C, hard 128–132 °C. Toffee: less milk and fat, boiled to about 150 °C; lower moisture, hard and brittle. Fudge: milk, butter, sugar boiled to about 116 °C and crystallised on cooling to a fine, short grain; chocolate fudge has 5–8 % cocoa. (iii) When sugar syrup is boiled, part of the sucrose breaks into invert sugar; the proportion is the degree of inversion. It increases with acid, time and temperature. Moderate inversion stops sucrose from crystallising and raises total sugar concentration; too much makes sweets sticky and moisture-absorbing, shortening shelf life.
6. Q.4 (i) Explain in detail the ingredients used in confectionery.
Answer: (a) Sweeteners — sucrose (granulated, fine, icing, syrup), invert sugar, corn/glucose syrup, honey, intense sweeteners and polyols. (b) Milk and milk products — milk powder, milk crumb, condensed and evaporated milk: flavour, bulk, body, structure, Maillard browning. (c) Water — dissolves sugar and distributes minor ingredients. (d) Salt — small amount; enhances taste. (e) Confectionery fats — neutral emulsified shortening, butter, cocoa butter: softness, lubrication, flavour. (f) Stabilisers — starches (wheat, maize, tapioca), pectin: hold moisture, prevent crystallisation. (g) Gelling/thickening agents — gelatin (from animal collagen; sets on cooling), pectin (fruit; sets with sugar and acid), gums (xanthan, guar, arabic, tragacanth; prevent syneresis and cracking), agar-agar (red seaweed extract; firm vegetarian gel). (h) Colours and flavours — mostly synthetic or nature-identical, within FSSAI limits.
7. Q.4 (ii) Give details of the manufacturing process of confectionery.
Answer: Principle: the same steps apply to all sugar sweets; only ingredients, boiling temperature and shaping differ. Steps: (1) balance the recipe; (2) prepare ingredients — weigh, dissolve sugar, soak gelatin, melt fat; (3) mix; (4) boil to the required temperature/stage (soft ball about 112–116 °C for fudge and fondant, firm ball 118–120 °C for soft caramel, hard crack about 149–166 °C for hard candy); (5) cool, shape (pour and cut, pull, mould, deposit, roll), wrap and pack in moisture-proof material. Factors affecting quality and storage: degree of sucrose inversion; time and temperature of boiling; residual moisture (under 2 % for hard candy); and other ingredients such as milk, fat, acid and gelling agents.
8. Projects: (i) a project on locally available Indian sweets (ii) a report on imported candies and chocolates.
Answer: (i) Group local sweets by base — khoa (pedha, burfi, kalakand), chhena (rasgulla, sandesh), flour-sugar-fat (laddoo, jalebi, Mysore pak, chikki), others (shrikhand, shankarpale); for each note main ingredients, sugar stage or method, shelf life and the 'best before' date displayed by the shop. (ii) For imported candies and chocolates note country of origin, importer's FSSAI licence, ingredients (sweetener type, cocoa %, emulsifier, colours), nutrition panel (sugar per 100 g), allergen and veg/non-veg mark, storage instructions, and compare the price per 100 g with Indian brands.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Per-capita confectionery consumption in India in 2019 was about…
Answer: A. As stated for 2019.
2. Fudge is made by boiling milk and sugar to about…
Answer: A. The soft-ball stage.
3. Lemon drops belong to…
Answer: C. Glassy, under 2 % moisture.
4. Invert sugar is prepared by…
Answer: B. Sucrose splits into glucose and fructose.
5. A natural gelling agent present in fruits is…
Answer: B. Gelatin is animal; agar is from seaweed.
6. Soft caramel is cooked to…
Answer: A. 149–166 °C is hard candy.
7. Which is the odd one out?
Answer: C. The rest are gelling agents.
8. Weeping of a jelly during storage is called…
Answer: C. Caused by excess acid or too little gelling agent.
9. Which sweet is deliberately crystallised?
Answer: C. The others are kept non-crystalline.
10. Pulling and folding a boiled mass is used for…
Answer: C. It traps air.
11. Glucose syrup in caramel mainly…
Answer: A. It interferes with sucrose crystals.
12. Chocolate melts in the mouth because of…
Answer: B. Cocoa butter melts at about 34–36 °C.
13. Which is a polyol sweetener?
Answer: B. Polyols are bulk sweeteners, less sweet than sugar.
14. Rasgulla is a ___-based sweet.
Answer: D. Chhena is acid-coagulated milk.
15. Brown colour of toffee comes from…
Answer: C. Milk protein + sugar, and sugar alone.
Get a ✓ Verified tutor for “Confectionery Technology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Confectionery Technology the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 40 minutes
Get a ✓ Verified tutor for “Confectionery Technology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Confectionery Technology.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Confectionery Technology” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.