TalentJR apps
Textbook: Geology – Class 12 (Balbharati, official free PDF) · pages 44–55
Tilted beds in a road cut, a sharp crack running through a dam site, a fold you can trace across a hillside — all are clues to the forces that squeezed and stretched the crust. This chapter covers stress and strain, strike and dip, folds, faults, joints and unconformities, and why engineers, oil geologists and miners care about them — with every exercise answered.
Stress is force per unit area. Lithostatic (confining) stress is equal from all sides; directed (differential) stress is tensional, compressional or shearing. Strain is the resulting change of shape. Rocks deform elastically (recoverable), plastically or ductilely (permanent flow at depth and high temperature) or brittlely (fracture, near the surface).
The attitude of a bed is given by its strike (direction of a horizontal line on the bed) and dip (direction and angle of maximum slope, at 90° to the strike). Dip measured in any other direction is apparent dip, always smaller than true dip. A Brunton or clinometer compass measures both.
Folds are bends caused by compression. A fold has an axial plane, hinge (axis), crest, trough and limbs. Anticlines arch up with the oldest beds in the core; synclines sag down with the youngest beds in the core; folds may be symmetrical or asymmetrical. Folds build mountains, trap oil and gas (Mumbai High is a faulted anticline) and can hold groundwater.
Faults are fractures with displacement. The hanging wall lies above an inclined fault and the footwall below; slip, heave (horizontal) and throw (vertical) describe movement. Normal faults (tension, hanging wall down), reverse and thrust faults (compression, hanging wall up), strike-slip faults (sideways), step faults, horsts and grabens are the main types.
Joints are fractures without displacement — strike, dip, oblique, bedding and columnar joints (cooling basalt at Panhala, Naldurg, Gilbert Hill). Unconformities are buried erosion surfaces that represent missing time: angular unconformity, disconformity and nonconformity. All these structures control foundations, tunnels, groundwater, ore deposits and petroleum traps.
Get a ✓ Verified tutor for “Structural Geology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A sandstone bed has a true dip of 30° due east. A railway cutting runs N60°E (60° away from the dip direction). What apparent dip will the bed show on the cutting wall?
Answer: Apparent dip ≈ 16° — about half the true dip, showing why the true dip must be measured at right angles to strike.
In a cliff, horizontal sandstone rests on a wavy surface cut across vertical slates, which themselves are cut by a granite dyke that stops at the wavy surface. List the events in order.
Answer: Deposition → folding/metamorphism → dyke intrusion → erosion (angular unconformity) → sandstone deposition. The dyke is older than the sandstone because it does not cross the unconformity.
| Structure | How it forms | Why it matters |
|---|---|---|
| Anticline | Compression bends beds upward | Oldest beds in core; oil and gas traps |
| Syncline | Compression bends beds downward | Youngest beds in core; artesian water |
| Normal fault | Tension; hanging wall drops | Grabens, rift valleys, step faults |
| Reverse / thrust fault | Compression; hanging wall rises | Mountain belts, e.g. Himalayan thrusts |
| Strike-slip fault | Shear; blocks slide sideways | Earthquakes (San Andreas) |
| Joint | Cooling, unloading or stress; no slip | Groundwater paths; weak foundations |
| Angular unconformity | Tilting + erosion + new deposition | Marks tectonic event and missing time |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 Correct answers: (1) intersection of inclined bed with horizontal plane; (2) plane dividing fold into halves; (3) an anticline is …; (4) limbs of asymmetrical syncline; (5) fracture with no displacement; (6) hanging wall displaced upwards; (7) unconformity with igneous/metamorphic older bed.
Answer: (1) a) strike. (2) b) axial plane. (3) d) convex upwards with its oldest bed at the core. (4) c) dip towards each other by different angles. (5) a) joint. (6) d) reverse fault. (7) b) nonconformity.
2. Q.2 Match: (1) throw, normal fault, heave, reverse fault; (2) anticline, asymmetrical fold, syncline, symmetrical fold; (3) angular unconformity, nonconformity, unconformity, disconformity.
Answer: (1) Option 2: a-iv (throw–vertical displacement), b-iii (normal fault–footwall relatively up), c-ii (heave–horizontal displacement), d-i (reverse fault–hanging wall up). (2) Option 3: a-iii (anticline–convex upward), b-iv (asymmetrical–unequal limb dips), c-ii (syncline–convex downward), d-i (symmetrical–equal limb dips). (3) Option 4: a-iii (angular–older series not parallel), b-iv (nonconformity–older plutonic/igneous rock), c-i (unconformity–surface of erosion or non-deposition), d-ii (disconformity–older series parallel to younger).
3. Q.3 Answer: (1) strike and dip; (2) true vs apparent dip; (3) parts of a fold; (4) anticline and syncline; (5) types of folds; (6) parts of a fault; (7) normal vs reverse faults; (8) types of joints.
Answer: (1) Strike is the direction of the line formed where an inclined bed meets a horizontal surface; dip is the direction and angle of the bed's steepest slope, measured at 90° to strike, e.g. strike N–S, dip 30° E. (2) True dip is measured at right angles to strike and is the maximum slope; apparent dip is measured in any other direction, is always smaller, and is zero along strike. (3) Axial plane, hinge line (axis), crest, trough and limbs — sketch an arch with the vertical axial plane, label hinge at the top and the two limbs. (4) Anticline: arched upwards, limbs dip away from the axis, oldest beds in the core, may trap oil. Syncline: trough-shaped, limbs dip towards the axis, youngest beds in the core, may hold groundwater. (5) Anticline and syncline; symmetrical (vertical axial plane, equal dips) and asymmetrical (inclined axial plane, unequal dips) anticlines and synclines. (6) Fault plane, fault trace, hanging wall (above), footwall (below), slip, heave and throw. (7) Normal: hanging wall down, tension, crust lengthened, makes grabens and step faults. Reverse: hanging wall up, compression, crust shortened, low-angle form is a thrust. (8) Strike joints, dip joints, oblique (diagonal) joints, bedding joints and columnar joints.
4. Q.4 (1) Symmetrical vs asymmetrical fold. (2) Types of faults with diagrams.
Answer: (1) Symmetrical: axial plane vertical; limbs dip at equal angles; one half mirrors the other; equal forces from both sides. Asymmetrical: axial plane inclined; limbs dip at unequal angles; unequal forces, stronger from one side; may grow into overturned folds. (2) Normal fault — hanging wall down along a steep plane, tension (sketch two blocks with the right block slid down). Reverse fault — hanging wall up, compression. Thrust — reverse fault with dip under 45°, older rocks pushed over younger. Strike-slip — horizontal movement along strike, right- or left-lateral. Step faults — parallel normal faults stepping down. Horst and graben — raised and dropped blocks between normal faults.
5. Q.4 (3) Columnar joints and how they form. (4) What is an unconformity and how does it form? (5) Disconformity vs nonconformity.
Answer: (3) Polygonal columns, usually 5–6-sided (3–8 possible), separated by contraction cracks, in lava flows and shallow intrusions. As the rock cools from its top and bottom surfaces it shrinks; tension builds around evenly spaced cooling centres and cracks link up into a hexagon-like network that grows inward perpendicular to the cooling surfaces. Examples: Panhala, Naldurg, Gilbert Hill, St Mary's Islands; rhyolite at Uttan. (4) An unconformity is a buried erosion or non-deposition surface between older and younger rocks representing missing time (hiatus). Formation: deposition of older rocks → uplift (with or without tilting/folding) → erosion → subsidence → deposition of younger rocks on the old surface. (5) Disconformity: rocks above and below are both sedimentary and parallel; the gap is shown by an uneven erosion surface or fossil break. Nonconformity: younger sedimentary rocks rest on older igneous or metamorphic rocks that were exposed by deep erosion.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. The line of intersection of an inclined bed with a horizontal plane gives the…
Answer: A. Strike is a horizontal direction.
2. The imaginary plane dividing a fold into two halves is the…
Answer: A. The hinge lies in it.
3. An anticline is convex upwards with…
Answer: D. Erosion of the crest exposes old rocks.
4. In an asymmetrical syncline the limbs…
Answer: A. Inclined axial plane.
5. A fracture without displacement is a…
Answer: D. Joints show no slip.
6. Hanging wall moves up relative to footwall in a…
Answer: B. Compression pushes it up.
7. Unconformity with igneous rocks below is a…
Answer: D. Sediments over crystalline rock.
8. Vertical component of fault displacement is…
Answer: D. Heave is horizontal.
9. Normal faults result from…
Answer: D. Crust is stretched.
10. A low-angle reverse fault is a…
Answer: A. Dip below 45°.
11. A rift valley is a…
Answer: D. Down-dropped block.
12. Apparent dip measured parallel to strike is…
Answer: A. No slope along strike.
13. Columnar joints form by…
Answer: C. Cooling cracks join into polygons.
14. Brittle deformation is favoured by…
Answer: A. Cold rocks fracture.
15. Parallel beds separated by an erosion surface form a…
Answer: B. Often detected by fossils.
Get a ✓ Verified tutor for “Structural Geology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Structural Geology the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 40 minutes
Get a ✓ Verified tutor for “Structural Geology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Structural Geology.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Structural Geology” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.