TalentJR apps
Textbook: Geology – Class 12 (Balbharati, official free PDF) · pages 83–97
Koyna in 1967, Killari in 1993, Bhuj in 2001, Malin village buried by a landslide in 2014 — Maharashtra and India know geohazards first-hand. This chapter explains how earthquakes start and are measured and located, why India is zoned for seismic hazard, how landslides happen and are prevented, and how volcanoes erupt, harm and can be watched — with every exercise answered.
Geohazards are geological conditions and processes that can cause widespread damage — earthquakes, volcanoes, landslides and debris flows, avalanches, tsunamis, cloudbursts and flash floods, glacial lake outbursts and coastal erosion. They arise from the Earth's interior, its surface and their interaction with the atmosphere.
Earthquakes are explained by plate tectonics and H. F. Reid's elastic rebound theory: strain builds up in rocks on either side of a locked fault until they rupture at the focus and snap back. Energy travels as body waves (P — fastest, push-pull; S — slower, shear, not through liquids) and slower but most damaging surface waves (Love and Rayleigh). Seismograms record them; the S–P interval gives distance, and three stations locate the epicentre by triangulation.
Intensity (Modified Mercalli, I–XII) describes the effects at a place; magnitude (Richter and today the moment magnitude Mw) measures energy at the source on a logarithmic scale. Most earthquakes occur in the Circum-Pacific, Alpine–Himalayan (Mediterranean–Asiatic) and mid-ocean ridge belts. Precise prediction is not yet possible, so hazard zonation and earthquake-resistant building codes are the main defence.
Landslides (mass wasting) are downslope movements of rock, debris and soil under gravity — falls, slides (rotational slumps and translational slides), flows, creep, spreads and complex movements. Weak rock, faults, joints, bedding and foliation dipping out of a slope, and water make slopes fail. Mapping, drainage, benching, retaining walls, rock bolts and piles reduce the risk.
Volcanoes are vents through which magma erupts. Shield volcanoes (fluid basalt, gentle slopes), composite or strato-volcanoes (andesite and ash layers, steep and explosive) and lava domes (viscous rhyolite) behave very differently. Hazards include lava flows, ash falls, pyroclastic flows, debris avalanches, lahars, gases, tsunamis and climate cooling from sulphate aerosols. Monitoring ground swelling, gases and tremors allows forecasts and timely evacuation.
Get a ✓ Verified tutor for “Geohazards” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Three stations record S–P intervals of 30 s, 45 s and 60 s for a local earthquake. Using the 8 km per second rule, find the circle radii for locating the epicentre.
Answer: Radii 240 km, 360 km and 480 km; the epicentre lies where all three circles intersect, closest to station 1.
| Hazard | Scale and predictability | Main mitigation |
|---|---|---|
| Earthquake | Sudden; regional to global; time and place cannot be predicted | Zonation, building codes, retrofitting, drills, early warning |
| Landslide | Local; susceptible slopes can be mapped; rain thresholds give warnings | Drainage, benching, retaining walls, avoid unstable slopes |
| Volcano | Known vents; eruptions often forecast days–months ahead | Monitoring, hazard maps, evacuation, lava barriers |
| Tsunami | Ocean-wide; hours of travel time across oceans | Warning centres (INCOIS), coastal zoning, evacuation routes |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 Fill in: (1) downslope movement under gravity (2) debris avalanche (3) landslides combine … (4) partly water-filled pores add … forces (5) most beautiful but deadliest volcanoes (6) … slumps slide on curved planes (7) factor × (S–P) (8) intensity scale (9) earthquake belts coincide with … (10) Richter scale uses the … of the largest wave.
Answer: (1) d) landslide. (2) a) very rapid to extremely rapid debris flow. (3) c) sliding and flowage. (4) b) resisting forces. (5) a) composite. (6) c) rotational. (7) 8 (km per second of S–P time). (8) Modified Mercalli (MM) scale. (9) plate boundaries. (10) amplitude.
2. Q.2 Choose: (1) geohazards originate … (2) ripple analogy explains … (3) Reid's theory explains … (4) equal-intensity lines (5) zig-zag record (6) statements on shield volcanoes.
Answer: (1) d) all of the above. (2) a) their travel away from the source. (3) a) the origin of earthquakes. (4) b) isoseismal lines. (5) b) seismogram. (6) b) statements i, ii and iv are true — statement iii is false because shield volcanoes erupt low-viscosity (fluid) basalt.
3. Q.3 Short answers (1–5): (1) no earthquakes below 700 km; (2) P faster than S; (3) surface waves more damaging; (4) seismic zones of India; (5) major types of mass movement.
Answer: (1) Earthquakes need brittle rock that stores strain and breaks suddenly. Below about 700 km temperature and pressure are so high that rock deforms by slow ductile flow, and the subducting slabs that host deep quakes have warmed up or changed mineral structure, so sudden rupture no longer happens. (2) P waves compress and expand rock along their path, and rock resists change of volume strongly; S waves shear it sideways, and rock is less resistant to shear — so P waves travel faster (Vp ≈ 1.7 Vs). (3) They travel along the surface where people and buildings are, have the largest amplitudes and longest duration, decay more slowly with distance and shake structures both sideways (Love) and up and down (Rayleigh). (4) The textbook map divides India into four zones, II, III, IV and V; Zone V — north-east India, the Himalayan belt (J&K, Himachal, Uttarakhand), Kutch and the Andaman–Nicobar Islands — is the most susceptible. (A 2025 BIS revision adds a higher Zone VI for the Himalayan arc.) (5) Falls (rockfall), slides (rotational slump, translational slide), flows (earthflow, debris flow, debris avalanche), creep, lateral spread, subsidence and complex movements.
4. Q.3 Short answers (6–10): (6) role of joints in landslides; (7) intensity vs magnitude; (8) standard method to find distance; (9) mitigating volcanic hazards; (10) importance of monitoring and preventing landslides.
Answer: (6) Joints occur in sets and split rock into blocks, lowering its strength; sets dipping towards the open face of a slope act as ready-made slip surfaces; water entering joints raises pore pressure and lubricates them, so blocks slide or topple, especially in heavy rain. (7) Intensity describes effects at a particular place (people's feelings, damage) on the Modified Mercalli scale I–XII and varies from place to place; magnitude measures the energy released at the source, one value per earthquake, on the logarithmic Richter or moment-magnitude scale. (8) Read the S–P time interval on the seismogram and convert it to distance with standard travel-time curves (quick rule: 8 km per second of S–P); using three or more stations, draw circles and find their intersection — the triangulation method. (9) Hazard maps and land-use zoning; continuous monitoring of ground deformation, earthquakes and gases (including by satellite); warning systems and evacuation plans; public education; barriers and channels to divert lava, water cooling of flows, check dams for lahars and draining crater lakes. (10) Landslides are frequent in the Western Ghats and Himalaya and kill people, cut roads and railways and damage property; recognising unstable slopes from field work and aerial or satellite images allows hazard maps and safe planning; monitoring rainfall, cracks and movement gives early warning; drainage, benching and retaining structures prevent failures.
5. Q.4 Long answers (1–4): (1) role of geology in landslides; (2) compare earthquakes, volcanoes and landslides; (3) why earthquakes cannot be predicted precisely; (4) types of seismic waves and how they are produced.
Answer: (1) Rock and soil type (weak shale, clay, weathered basalt and laterite fail easily); bedding planes dipping out of the slope; schistosity and foliation; joint sets inclined towards the free face; faults and crushed zones; contrast of permeable over impermeable layers (water perches and lubricates the contact); weathering depth; groundwater and pore pressure. Hence geological mapping is the first step in slope design. (2) Scale: earthquakes affect regions to whole countries; volcanoes affect the area around a known vent but ash and aerosols can affect the globe; landslides are usually local but very frequent. Predictability: earthquakes cannot be predicted in time and place; volcanoes can often be forecast from monitoring; landslide-prone slopes can be mapped and rain-triggered slides warned of. Mitigation: earthquakes — zonation, codes, retrofitting, drills; volcanoes — monitoring, hazard maps, evacuation, diversion works; landslides — mapping, drainage, benching, retaining walls, avoiding unstable sites. (3) Rupture depends on stress and fault strength deep underground, which cannot be measured directly; faults are complex and heterogeneous; precursors such as foreshocks, radon and well-level changes are inconsistent and many quakes have none; the recurrence interval of large quakes is long and irregular, so data are few. Only probabilities over decades can be given. (4) Rupture at the focus sends out body waves — P waves (compressional, fastest, through solids and liquids) and S waves (shear, slower, solids only) — through the interior; when body waves reach the surface they generate surface waves — Love waves (horizontal side-to-side) and Rayleigh waves (rolling, elliptical) — which are slowest but largest.
6. Q.4 Long answers (5–7): (5) volcano conditions most significant in preventing hazards; (6) effects of landslides on planning and executing projects; (7) volcanic hazard that does not directly endanger life.
Answer: (5) Knowing the volcano's type and magma (silica, viscosity, gas content), its past eruption style and frequency, the location of towns, valleys and snow or crater lakes that could feed lahars, and continuous signs of unrest — ground swelling, earthquake swarms, gas emissions, temperature changes — allows hazard maps, forecasts and timely evacuation. (6) Landslide-prone ground raises the cost of roads, railways, dams, tunnels and townships; projects need geological investigation, slope-stability analysis and hazard zonation before alignment is fixed; cutting slopes, blasting, deforestation and poor drainage can trigger new slides during construction; designs must add drainage, benching, retaining walls, rock bolts and nets; ignoring them leads to blocked highways (e.g. Konkan and ghat roads in monsoon), damaged reservoirs and loss of life. (7) Ash falls (and slow lava flows) — the main dangers are roof collapse under ash weight, crop damage and breathing problems rather than direct deaths.
7. Practical: Car A (100 km/h) passes a spot at 2:30 pm and car B (85 km/h), which left at the same time, at 2:45 pm. How far is the spot from the start? Relate this to locating an earthquake.
Answer: tA ≈ 1.42 h, so d = 100 × 1.42 ≈ 142 km. In the same way, the delay between P-wave (fast car) and S-wave (slow car) arrivals at a seismograph station gives its distance from the epicentre; distances from three or more stations, drawn as circles, locate the epicentre.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Downslope movement of rock debris under gravity is a…
Answer: D. Also called mass wasting.
2. A debris avalanche is a…
Answer: C. One of the fastest mass movements.
3. Landslides are often a combination of…
Answer: D. Complex slides.
4. Partly water-filled pores in sediment add to … forces.
Answer: B. Surface tension gives cohesion.
5. The most beautiful but deadliest volcanoes are…
Answer: C. Explosive andesitic cones.
6. Sliding on a curved slip plane is…
Answer: B. Blocks rotate backward.
7. The intensity scale most used is…
Answer: B. Grades I–XII.
8. Earthquake belts coincide with…
Answer: C. Plates interact there.
9. Isoseismal lines join points of equal…
Answer: C. Effects at the surface.
10. The record of seismic waves is a…
Answer: B. The instrument is a seismograph.
11. Shield volcanoes are large, gently sloping and…
Answer: C. Low-silica lava flows easily.
12. Which arrives last on a seismogram?
Answer: D. Slowest, largest.
13. Elastic rebound theory explains…
Answer: C. Strain builds then releases.
14. S–P time of 50 s gives a distance of about…
Answer: C. 8 × 50.
15. Which hazard usually does not directly endanger life?
Answer: C. Main danger is roof collapse.
Get a ✓ Verified tutor for “Geohazards” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Geohazards the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 45 minutes
Get a ✓ Verified tutor for “Geohazards” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Geohazards.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Geohazards” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.