TalentJR apps
Textbook: Geology – Class 12 (Balbharati, official free PDF) · pages 116–127
The HSC Geology practical exam carries 30 marks and tests what you can do with specimens, maps and data: identify ore and industrial minerals, name rock textures and structures, draw geological sections of horizontal and inclined series, mark India's seismic zones, read features on satellite images, and calculate an epicentre and the water available for recharge. This guide walks through all twelve practicals and the paper pattern, with model answers and method steps.
Practicals 1–3 identify minerals from their physical properties — colour, streak, lustre, form, fracture, cleavage, hardness and specific gravity — first in general, then the ore minerals (haematite, magnetite, pyrite, pyrolusite, psilomelane, chalcopyrite, malachite, galena, sphalerite, bauxite) and industrial minerals (coal, gypsum, kaolinite, feldspar, quartz, garnet, corundum, kyanite, zircon, diamond, muscovite, biotite, sulphur, cinnabar) of Chapter 5.
Practicals 4–6 recognise textures and structures in rock specimens: igneous (phaneritic, porphyritic, vesicular, amygdaloidal, ropy, pillow), sedimentary (clastic, lamination, stratification, cross bedding, graded bedding, ripple marks) and metamorphic (schistose, granulose, gneissose) — Chapter 2.
Practicals 7–8 use geological maps 1–9 of the textbook to draw sections and write the topography, order of superposition and geological history of horizontal and inclined series. Horizontal bed boundaries run parallel to contours; inclined boundaries cut across them, and strike lines give dip direction and amount.
Practical 9 marks India's seismic zones on an outline map (Chapter 7); practical 10 identifies faults, folds, joints and dykes on satellite images or aerial photographs (Chapter 8, Plates 1–4); practical 11 calculates water available for recharge with Q = A × C × P (Chapter 6); practical 12 locates an epicentre from S–P times by triangulation (Chapter 7).
Field work or a project with viva voce (4 marks) and a certified journal (2 marks) complete the assessment. Neat labelled diagrams, careful handling of specimens and full, ordered descriptions earn the marks.
Get a ✓ Verified tutor for “Practicals” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
An unknown mineral is brass-yellow, metallic, gives a greenish-black streak, and is scratched by a knife. Is it pyrite or chalcopyrite?
Answer: Chalcopyrite, CuFeS₂ — the hardness test separates it from pyrite.
On a map (1 cm = 100 m, contour interval 20 m), strike lines drawn for the base of bed C at 300 m, 280 m and 260 m are each 1 cm apart, and heights fall towards the east. Find the dip.
Answer: Bed C dips about 11° towards the east; its strike is north–south.
A college has a GI-sheet roof of 600 m² and a brick-paved yard of 1,000 m² (C = 0.55). Annual rainfall is 2,500 mm (Konkan). How much water is available for recharge?
Answer: About 27.25 lakh litres (2,725 m³) a year — enough to justify several recharge pits or a recharge well.
| Question | Task | Marks |
|---|---|---|
| Q.1 A | Identify and describe ore minerals (tables 1–3) | 3 |
| Q.1 B | Identify and describe industrial minerals (tables 4–7) | 4 |
| Q.2 | Identify rocks; colour, texture, structure, classification (tables 8–11) | 4 |
| Q.3 a | Section of an inclined series map with description | 7 |
| Q.3 b | Description of a horizontal series map | 2 |
| Q.5 | Mark seismic zones on an outline map of India | 1 |
| Q.6 | Calculate epicentre (1) and recharge water (1) | 2 |
| Q.7 | Identify features on a satellite image | 1 |
| Q.8 | Field work / project and viva voce | 4 |
| Q.9 | Certified journal | 2 |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Practical paper Q.1 A: Identify and describe the ore mineral — a steel-grey, reniform specimen giving a cherry-red streak.
Answer: Haematite. Composition Fe₂O₃; colour steel grey to iron black; streak cherry red; lustre metallic to submetallic; form reniform/botryoidal, also compact or scaly; cleavage absent; fracture uneven; H 5.5–6.5; SG 4.9–5.3. Occurs in banded haematite quartzite. India: Odisha, Jharkhand, Chhattisgarh, Karnataka, Goa; Maharashtra — Chandrapur, Gadchiroli, Sindhudurg. Uses: chief ore of iron, red pigment, polishing powder.
2. Practical paper Q.1 B: Identify and describe the industrial mineral — a colourless to white mineral, pearly lustre, perfect cleavage, scratched by the fingernail.
Answer: Gypsum. Composition CaSO₄·2H₂O; colour white or colourless; streak white; lustre vitreous to pearly (silky in fibrous satin spar); form tabular, fibrous or massive; cleavage perfect; fracture uneven to splintery; H 2; SG 2.3. Occurs as an evaporite in sedimentary rocks. India: Rajasthan (chief), Jammu & Kashmir, Tamil Nadu, Gujarat. Uses: added (3–5%) to cement clinker to slow setting, plaster of Paris, fertiliser (soil conditioner), wallboards.
3. Practical paper Q.2: Identify the rock and describe its colour, texture, structure and classification — a dark grey fine-grained rock with rounded cavities filled by white radiating crystals.
Answer: Amygdaloidal basalt. Colour dark grey to greenish black; texture fine-grained (aphanitic), may be porphyritic; structure amygdaloidal — former gas vesicles filled with secondary zeolites, calcite or silica; essential minerals plagioclase and augite. Classification: igneous — volcanic (extrusive) — basic (45–55% SiO₂) — melanocratic. Occurrence: Deccan Traps of Maharashtra. Uses: building and road stone (compact variety); zeolite specimens.
4. Practical paper Q.3 a and b: How will you draw and describe the geological section of an inclined series map and describe a horizontal series map? (Maps 1–9.)
Answer: Inclined series: (1) draw the topographic profile along X–Y from contour crossings; (2) draw strike lines for each boundary, find dip direction (towards lower strike lines) and dip = tan⁻¹ (contour interval ÷ strike-line spacing); (3) plot where each boundary meets X–Y and draw it at the dip (apparent dip if the section is oblique); (4) shade beds with a key; (5) describe topography (hill, valley, slope directions, highest and lowest contours); (6) give the order of superposition — oldest at the base in the dip direction sequence — with thicknesses, and the geological history: deposition, tilting, erosion. Horizontal series (description only): boundaries follow contours; list beds from lowest (oldest, in the valley) to highest (youngest, on hilltops) with thickness = upper boundary height − lower boundary height; history: continuous deposition in order, then uplift without tilting and erosion producing the present relief. (The actual sections of Maps 1–9 must be drawn on graph paper from the printed maps.)
5. Practical paper Q.5: Name the seismic zones on an outline map of India.
Answer: Zone V (very high): north-eastern states, Jammu & Kashmir and Ladakh, Himachal Pradesh, Uttarakhand, north Bihar, Rann of Kutch, Andaman and Nicobar Islands. Zone IV (high): Delhi, Indo-Gangetic plain near the Himalaya, parts of Gujarat and Punjab, the Koyna–Warna region of Maharashtra. Zone III (moderate): much of the peninsula — Mumbai, Pune, Nashik, Kolkata, Chennai, Kerala, parts of Odisha and MP. Zone II (low): stable interior shield — most of Karnataka, Telangana, Chhattisgarh, east Maharashtra, parts of Rajasthan and MP.
6. Practical paper Q.6 a: Three stations record S–P intervals of 40 s, 55 s and 70 s. Find their distances from the epicentre and explain how it is located.
Answer: Distances: 8 × 40 = 320 km, 8 × 55 = 440 km, 8 × 70 = 560 km. Using the map scale, draw circles of these radii around stations 1, 2 and 3; the single point where all three circles intersect is the epicentre (closest to station 1). With a standard travel-time graph, read the distance for each S–P value instead of using the 8 km/s rule.
7. Practical paper Q.6 b: A house has a concrete roof of 15 m × 10 m. Annual rainfall is 750 mm. Calculate the water available for recharge.
Answer: A = 150 m²; Q = 150 × 0.70 × 750 = 78,750 litres per year (78.75 m³).
8. Practical paper Q.7: How are faults, folds, joints and dykes identified on a satellite image (Plates 1–4)?
Answer: Fault: a long, sharp, straight or gently curved lineament; ridges, beds or streams are offset across it; often a straight valley or vegetation line. Fold: ridges and valleys of resistant and soft beds curve and repeat symmetrically; outcrop bands close in a 'U' or 'V' at the nose of a plunging fold. Joints: several sets of straight, closely spaced intersecting lines dividing bare rock into blocks; streams may follow them in a rectangular pattern. Dyke: a narrow, straight, continuous ridge or dark band of uniform width cutting across the host rocks, often in parallel swarms (Deccan). (Naming the features on Plates 1–4 needs the printed images.)
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. The streak of a mineral is tested on…
Answer: D. Powder colour is reliable.
2. A mineral scratched by a copper coin but not by a fingernail has hardness…
Answer: A. Coin is 3.5, nail 2.5.
3. Greenish-black streak and brass-yellow colour, scratched by knife:
Answer: D. Pyrite is too hard for a knife.
4. A lead-grey, very heavy mineral with cubic cleavage is…
Answer: D. SG about 7.5.
5. Pearly white mineral scratched by the fingernail:
Answer: C. H 2.
6. Pisolitic, earthy, light mineral aggregate:
Answer: C. Aluminium ore.
7. A rock with large feldspar crystals in a fine dark groundmass shows … texture.
Answer: B. Two-stage cooling.
8. Thin inclined layers within a sandstone bed are…
Answer: B. Formed by migrating ripples or dunes.
9. Marble and quartzite show … structure.
Answer: D. Even interlocking grains.
10. In a horizontal series, bed boundaries are…
Answer: B. Each boundary is at one height.
11. Dip direction is…
Answer: B. Beds descend that way.
12. Strike lines 200 m apart with 20 m contour interval give a dip of about…
Answer: B. tan⁻¹ 0.1 ≈ 5.7°.
13. A long straight ridge cutting across basalt flows on a satellite image is probably a…
Answer: A. Deccan dykes form such ridges.
14. Recharge from a 200 m² concrete roof (C = 0.7) with 800 mm rain is…
Answer: B. 200 × 0.7 × 800.
15. Minimum stations to fix an epicentre:
Answer: A. Two circles meet at two points.
Get a ✓ Verified tutor for “Practicals” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Practicals the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 40 minutes
Get a ✓ Verified tutor for “Practicals” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Practicals.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Practicals” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.