TalentJR apps
Textbook: Home Management – Class 12 (Balbharati, official free PDF) · pages 104–112
Good lighting makes a home safe, comfortable for the eyes, cheaper to run and beautiful. This chapter explains why lighting matters and what affects the amount of light in a room, the sources of light (natural light, then incandescent, fluorescent, CFL, LED and solar), the principles of good lighting, the three types (general, task, decorative) and the five methods (direct, indirect, semi-direct, semi-indirect, diffused). Several numbers in the book about lamps are out of date or wrong; these notes correct them for 2026 and answer every exercise.
Lighting gives visibility, brightness and beauty and brings out colour and texture. The amount of light in a room depends on the colour and texture of its surfaces — dark, rough surfaces absorb light; light, smooth ones reflect it — and on the colour of the light itself. Door and window area of about one-seventh to one-tenth of the floor area lets in good daylight.
Sources: natural light (the sun) and artificial light — non-electric (candles, oil and gas lamps) and electric (incandescent bulbs, fluorescent tubes, CFLs, LEDs and solar lighting). LEDs are now the standard choice: they use roughly 80–90% less power than an incandescent bulb, contain no mercury and last 15,000–25,000 hours or more.
Solar home lighting uses photovoltaic panels, an inverter, a battery and fixtures. It is clean and cuts bills, but costs more to install and gives less power on cloudy days. Rooftop solar is subsidised under PM Surya Ghar (2024).
Principles of lighting: correct intensity, steadiness (no flicker), avoiding glare, the right light colour and colour rendering (cool light for tasks, warm light for living spaces), safety, planning with the building's design, and improving decoration.
Types: general or ambient (even overall light), task or local (for a specific job, used with general light) and decorative or accent (to highlight objects). Methods, by the share of light going up or down: direct (90–100% down), semi-direct (60–90% down), diffused (about half each way), semi-indirect (60–90% up) and indirect (90–100% up).
Get a ✓ Verified tutor for “Household Lighting” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A family replaces ten 60 W incandescent bulbs with ten 9 W LED bulbs. The lights are used 5 hours a day. Electricity costs ₹8 per unit (kWh). Find the monthly saving (30 days).
Answer: About ₹612 a month — ten LED bulbs costing around ₹1,000 pay for themselves within two months.
Suggest the type and method of lighting for: a) a study table b) a living room with a painting c) a bedroom d) a kitchen counter.
Answer: Every room needs layers: general light for safety, task light where work is done, and accent light for beauty.
| Lamp | How it makes light / efficiency | Typical life and notes |
|---|---|---|
| Incandescent bulb | Hot tungsten filament glows; ~10–15 lumens per watt | 750–1,000 h; mostly heat; phased out |
| Fluorescent tube | Mercury UV makes phosphor glow; ~50–90 lm/W | 7,500–15,000 h; contains mercury |
| CFL | Folded fluorescent tube with ballast; ~55–65 lm/W | 6,000–10,000 h; slow warm-up; mercury |
| LED | Semiconductor chip emits light; ~90–150 lm/W | 15,000–25,000 h+; no mercury; instant |
| Solar lighting | PV panel → battery → inverter → lamp | Free energy after installation; less on cloudy days |
| Candle / diya | Burning wax or oil | Decorative, festive; fire risk |
Solve each one in your notebook first. Then open the solution and compare every step.
1. MCQ: 1) Incandescent bulb invented by ___ in 1879. 2) Incandescent bulbs use ___ filament (copper / brass / tungsten / steel). 3) Standard size of fluorescent tube ___ inches (28–38 / 38–48 / 48–84 / 84–90). 4) Full form of CFL ___. 5) Bulbs create ___ and make it difficult to work (shadow / light / rays / reflection).
Answer: 1) (a) Thomas Edison 2) (c) tungsten 3) (c) 48–84 (the common household tube is 4 ft = 48 in) 4) (b) Compact Fluorescent Lamps 5) (a) shadow.
2. Match: i) general lighting ii) task lighting iii) decorative lighting — with a) for specific task b) to enhance the objects c) light up the entire room. True or false: a) Tungsten filament is used in CFL bulbs. b) LED stands for Light Emitting Diode. c) CFL bulbs are more durable than incandescent bulbs. d) The life of LED lamps is five times more than CFL. e) LED has more energy efficiency than other lighting sources.
Answer: Match: i–c, ii–a, iii–b. True/false: a) False — CFLs have no filament; they work like fluorescent tubes. b) True. c) True — about 6,000–10,000 h compared with about 1,000 h. d) True as the book states (in practice LEDs last roughly 2–4 times longer than CFLs). e) True.
3. Define natural lighting, task lighting and diffused lighting.
Answer: Natural lighting — light from the sun entering a room through doors, windows and skylights. Task lighting — focused light for a specific activity such as reading or dressing, used together with general lighting. Diffused lighting — light spread about equally upward (reflected from the ceiling and walls) and downward, giving a soft, pleasant effect.
4. Differentiate: a) incandescent and fluorescent lighting b) CFL and LED c) direct and indirect lighting.
Answer: a) Incandescent: a heated tungsten filament glows; warm light; mostly heat; about 1,000 h; cheap; no flicker; casts shadows. Fluorescent: mercury UV makes the phosphor glow; soft, near shadow-free light; little heat; 3–4 times more efficient; 7,500 h or more; costlier fittings; older types flicker; contains mercury. b) CFL: a folded fluorescent tube with mercury; slow warm-up; usually not dimmable; about 6,000–10,000 h. LED: a semiconductor chip; instant full light; no mercury; most efficient; 15,000–25,000 h or more; dimmable versions available. c) Direct: 90–100% of light falls downward on the work; efficient, but glare and hard shadows. Indirect: 90–100% goes up and is reflected; soft and nearly glare-free, but needs light, clean surfaces and more power for the same brightness.
5. Short notes: incandescent bulbs, fluorescent tubes, CFL, LED, solar lighting.
Answer: Incandescent — a tungsten filament heated to about 2,500 °C glows inside an argon-filled bulb; cheap and flicker-free, but wastes about 90% of its energy as heat and lasts only about 1,000 h. Fluorescent tube — mercury vapour gives UV that makes the phosphor coating glow; soft light, little heat, efficient; contains mercury and older types flicker. CFL — a compact fluorescent lamp for ordinary holders; uses about 75% less energy than incandescent and lasts 6,000–10,000 h; slow warm-up and mercury. LED — a semiconductor diode that emits light; the most efficient, no mercury, instant, long-lasting; good fittings cost more. Solar lighting — PV panel, battery, inverter and fixtures; free, clean energy and net-metering income; high setup cost and weather-dependent.
6. Long answer: Explain any two types of artificial lighting sources.
Answer: 1) LED — current through a compound-semiconductor chip (for example gallium nitride) releases light directly; white LEDs use a blue chip with a yellow phosphor. Advantages: about 85–90% less energy than incandescent, very long life, instant start, little heat, no mercury, small and sturdy, low maintenance. Disadvantages: good fittings cost more, cheap ones may flicker, only dimmable models work with dimmers, and the base must lose heat. 2) Fluorescent tube — a sealed tube with mercury and argon; current makes the mercury give off UV, which the inside phosphor coating turns into visible light. Advantages: soft, nearly shadow-free light, little heat, efficient, long life. Disadvantages: older tubes flicker, costlier installation, and mercury needs safe disposal.
7. Long answer: Write about general, task and decorative lighting, and describe the methods of lighting.
Answer: General (ambient) lighting gives even, overall light for safe movement — ceiling panels, tube lights, cove lights, direct or indirect. Task lighting is focused light for one activity (desk lamp, mirror light, under-cabinet strip) used with general light to avoid shadows and strain. Decorative (accent) lighting highlights paintings, sculptures, textured walls and gardens to create focal points. Methods: direct — 90–100% down, efficient, but glare and shadows, used generally; indirect — 90–100% up to the ceiling and walls, soft and glare-free, needs light reflective surfaces, for bedrooms; semi-direct — 60–90% down, softened shadows, for kitchens; semi-indirect — 60–90% up, pleasant mood, for dining rooms; diffused — about 50% each way, pleasing, for any room.
8. Long answer: Write about the principles of lighting.
Answer: 1) Intensity — enough light for the task, neither too dim nor too bright. 2) Steadiness — steady, flicker-free light reduces eye strain. 3) Glare — avoid very bright spots and sharp contrasts using shades, diffusers and matt surfaces. 4) Light colour and colour rendering — cool light for work, warm light for living spaces, good CRI for true colours, coloured lamps only for decoration. 5) Safety — light stairs, passages and entrances. 6) Architectural framework — plan windows, doors and light points in the house design. 7) Improvement of decoration — use light to bring out textures, furniture and art.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. The incandescent bulb was invented by ______ in 1879.
Answer: A. Practical bulb, 1879.
2. Incandescent bulbs use a ______ filament.
Answer: D. Very high melting point.
3. The standard size of a fluorescent tube (book) is ______ inches.
Answer: B. Book's range.
4. CFL stands for…
Answer: C. Compact.
5. Bare bulbs create ______ that make work difficult.
Answer: A. Point source of light.
6. General lighting…
Answer: A. Ambient light.
7. A desk lamp is an example of…
Answer: A. Local, specific.
8. A spotlight on a painting is…
Answer: C. Highlights an object.
9. Which lamp uses no filament and contains mercury?
Answer: B. Fluorescent family.
10. Which is the most energy-efficient household lamp?
Answer: B. Most lumens per watt.
11. In indirect lighting, the light is directed mainly…
Answer: A. 90–100% up.
12. Light split about equally up and down is…
Answer: A. About 50:50.
13. The part of a solar system that changes DC to AC is the…
Answer: D. Inverter.
14. Warm light (about 2,700 K) is best for…
Answer: D. Flatters skin tones, relaxing.
15. Discomfort caused by too much brightness or contrast is…
Answer: B. Principle of lighting.
Get a ✓ Verified tutor for “Household Lighting” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Household Lighting the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 40 minutes
Get a ✓ Verified tutor for “Household Lighting” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Household Lighting.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Household Lighting” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.